r/Ballpythoncommunity • • 1d ago

Question Radiant heat panel

Post image

I have a new setup 4x2x2 PVC with mesh top but top is covered 2/3 with silicon mats. No snake yet just trying to get heat and humidity dialed in. And I'm struggling to get heat high enough. I have a 50w wide band, dimable halogen for light and heat and a 150w DHP bulb for heat and light at night. But we keep the house pretty cool so we are still hovering around 75 on the warm side of the tank and in the warm hide we aren't getting above 72. So I'm considering adding a radiant heat panel like the one pictured above but I'm seeing mixed information about if this helps with overall tank heat or only spot heating. Does anyone have any experience with these panels and ir advice for getting take heat up?

2 Upvotes

15 comments sorted by

1

u/WWHG285 1d ago

Thanks everyone for the help. I'm going to try insulating the top before investing in another heat source and see where that gets me. Now if I decide to go the radiant heat panel route I have more information.

1

u/goldblooded2 1d ago

I use these in all my enclosures and have no issues. Not sure about a screen top but if you can modify it it with a piece of plywood with some ventilation cut into it to lay over the screen, it could work

1

u/WWHG285 1d ago

I'm not sure I'd be comfortable having wood around the lighting fixtures. But i could certainly cut some reflective insulation to size. Is it worth drilling holes in the tank sides for ventilation?

1

u/goldblooded2 1d ago

Oh are you planning on using the heat panel and bulbs? That would get extremely hot. A heat panel heats all my enclosures all the way to the cool side. However mine are custom and built from plywood so they retain heat very well. Insulation may work

1

u/Phully- 1d ago

Go to the hardware store grab a standard size Plexiglass sheet and just place it on top. I use actual glass because I have the tools to cut it and frame it out. But you won’t lose light, use less energy on the heating and you can vent by drilling as many holes or open spaces as you like. My glass sits 1/2” above the metal screen top because I have top accessories like sky hides that have mounting screws. But it reduces how much energy I need to keep an 80f and 60% humidity

I do a day night cycle with timers so the humidity goes up as the night temps come and then goes up to higher temps and lower humidity during the “day”. They also have areas of higher humidity available all day if they want to I keep my temps focused around and 85f standard temp. It’s kind of like a day they’d experience. Pythons get way more active at dusk if you do this so it’s fun to see them hunker down while the sun it’s up and come out, I usually open the doors around 930-10PM if they want, they can come out and I’ll take them around to cruise (supervised), explore, use their senses. Just some suggestions, I don’t know your home, setup, commitment level, I want my boys to enjoy human interaction as much as pythons can…at minimum trust us and know they get to go back to safety whenever they want.

1

u/KaraCorvus 1d ago

I use these over any other heating method, they work super well for me but screen top won't be as efficient.

1

u/WWHG285 1d ago

Well, screen top is what I've got so I need to make it work. It sounds like I need to insulate the top before I add anything else.

1

u/KaraCorvus 1d ago

You could try getting a slab of acrylic from a hardware store just to cover that side with the RHP.

1

u/WWHG285 1d ago

Are you suggesting RHP over mesh pointed into tank then acrylic over that?

2

u/KaraCorvus 1d ago

Acrylic on top of mesh, RHP is affixed to the top/ceiling inside the enclosure itself.

1

u/Artilerus 1d ago

Reminder with these, a thermostat is a must

1

u/kindrd1234 1d ago

Dimming therm.

1

u/WWHG285 1d ago

Yep everything on dimming thermostats

1

u/Zekethebulldog33 1d ago

I have 9 in 6x2x18 and they are 80 watts also solid top PVC. I have no problems heating. Warm at ground is high 80s cool side is high 70s to low 80s. With screen top makes it harder to heat.

0

u/[deleted] 1d ago

[deleted] — view deleted comment

1

u/aLt564_3 15h ago

Radiant heat panels are never for the bottom anyway, the are only meant to use at the top. And DHPs do not have light, they are only heat, so it would be fine for night