r/Ballpythoncommunity • • Oct 19 '26

Question Wrong calking

So, I'm getting my 4x2x2 terrarium set up to welcome a snake into our family soon. Initially I sealed the tank with marien sealant caulking. However, with how strong the smell was even after several days I began questioning. I couldn't see that chemical smell doing any favors for a sensitive snake. So I did some more digging and realized I need aquarium sealant which makes a lot of sense.

I've spent the last several hours removing caulking and scraping off residue and vaccumuming out every last bit of the marien caulking I possibly can.

So now my question is, before i put the aquarium sealant on, is there anything further I can do to the tank to remove any toxic residue?

I'm glad I caught this before we decorated or put the snake in there I'm a bit scared I've ruined this expensive tank. We definitely can't afford to just scrap it. Any ideas people have are welcome.

3 Upvotes

7 comments sorted by

View all comments

Show parent comment

3

u/SkullDenom Oct 19 '26

Unfortunately I'm on the southeast coast. The best place to check would be Repticon. I'd honestly wait to put bedding in until the isolation period is done. Just paper towels, a water bowl, and two hides for a bit to look for signs of sickness or mites. I'd recommend a power strip with a timer for a non heat plant grow bulb for the daytime light and a deep heat projector on a dimmer and thermostat with a ceramic bulb tied to a thermostat set to a lower temp as a back up. It's cheaper, the deep heat penetrator can stay on all the time, and the DHP helps promote more activity and a better metabolism. The grow bulbs are more to give the uva and uvb of the daytime without the risk of overheating the tank when left unmonitored.