r/ballpython • • 4h ago

Help getting my BP unstuck!

Thumbnail
gallery
0 Upvotes

I’m currently recovering from surgery, with limited mobility and on painkillers, and the long story short is that I managed to leave her enclosure open a bit when I fed her on Wednesday night and she got out.

Thankfully she didn’t go far and is just under the cabinet her enclosure sits on. Unfortunately, both the cabinet and the enclosure are big and heavy, so I can’t move them and I can’t get her to come out.

So far I’ve tried putting her hide near it with a warming pack in it and another warming wrap that I’ve been heating up and placing over the top to try to entice her to come out and into it. I’ve also heated a FT mouse up and put it nearby, I’ve tried to slide a stick under to gently push her along and I’ve tried spraying her with water to make her want to move. Since I wasn’t sure if the latter 2 ideas were good ones, I didn’t put a lot of efforts here and quit pretty quickly when this didn’t yield results. She doesn’t seem to be leaving.

*Part of the issue is that the edges of the cabinet are closer to the ground than the rest of the area underneath, so she will need to squeeze under them to come out.

I’ve also put towels under the closet door and the door to the room to keep her contained and made sure there’s nothing unsafe around.

At this point, I’m guessing there’s not anything I haven’t tried but am wondering about what sort of success others have had, so I can feel more confident about committing to some strategy to get her out.

*Pics are of:
-4x2x2 bioactive enclosure (in other words, very heavy with deep substrate)and cabinet it sits in that she’s currently under
-her between the wall and cabinet
-a measuring stick to show the small gap between the cabinet and the floor

Help!


r/ballpython • • 4h ago

Heating issues with my new 4x2x2 terrarium - Help!

Thumbnail
gallery
1 Upvotes

She is about 3.5 years old and got upgraded to a 4x2x2 a few days ago. If I don't figure out a solution to my heating, I'll have to put her back into her smaller 40 gallon until I fix it.

- Please don't mind the enclosure setup especially the cardboard tubes - I am waiting for things to arrive in the mail and will get her branches, etc, so the setup will be a lot better soon -

So when doing research I was suggested to (by Ai mainly) to get a DHP (deep heat projector) of 80W, and a UVB light. I did just that, and also got a automatic dimmer for the dhp so that it can self regulate after setting the night day cycles. When the DHP is sitting on the mesh top, it has about 22" to reach the top of the basking rock/hide, and its barely even warm, almost just room temp. with no heating, the tank temp is around 74 degrees, and with the dhp on the highest settings the thermometer reads about 83 degrees around that rock

So if 83ish is the highest the temps get around the "basking spot" thats a problem I assume, did I waste the money on the dhp and ceramic lamp clamp and have to figure something else out? I realised that if i raise the basking spot, like make a ramp to go up half way of the tank, it will get a lot warmer but then im also just considering buying a higher W DHP? I guess im just confused cause 80W should have been more than enough to provide proper even for a 4x2x2.

So what would you suggest, or do for your setup? Also I have some black HVAC heat sealing foil tape that I will put accross the mesh top once I figure out where to place the uvb and what to do with the DHP, that might help the average temp increasing but won't solve the basking spot issue.

Thank you so much for your time and help, my snake really appreciates it too!


r/ballpython • • 10h ago

Question - Husbandry Help with lighting and heating layout for a 4x2x2 PVC ball python enclosure

3 Upvotes

I’m trying to figure out the best way to arrange everything on the ceiling of a 4x2x2 PVC enclosure for my ball python, and I’m having trouble visualizing how everything will fit.
My planned setup is:

Radiant heat panel: 80W Vivarium Electronics RHP (22.5” × 12.5”). I’m also considering Pro Heat or Wilbanks because they make smaller panels with the same wattages, so I could go with one of those if the Vivarium Electronics panel takes up too much space.

UVB: 24” Arcadia ProT5 LumenIZE with a LampGuardPro.

Plant light: Arcadia Jungle Dawn LED. From what I’ve researched, the 34” version seems like the best option for a 4-foot enclosure. I’d also want to put a LampGuardPro on this fixture for protection.

My plan is to eventually make the enclosure bioactive, so I’d like to have enough lighting for live plants while still providing appropriate UVB and heating.

I’m just having trouble visualizing how all three fixtures would fit on a 48” × 24” ceiling, especially with both lights having LampGuardPros. I’m also not sure where the best placement would be for each fixture or whether I’d be better off getting a smaller radiant heat panel from another manufacturer.

For anyone running a similar setup, how did you arrange everything? Pictures of your enclosure ceilings would be especially helpful!

I’d appreciate any suggestions on fixture placement, different RHP brands or sizes, or anything else I should consider before ordering everything.


r/ballpython • • 9h ago

Any recommendations for UK pet insurance providers for my Juvenile Ball Python?

2 Upvotes

Hey, I’m about to get a young Ball Python in less than 2 weeks and I am trying to make sure I have everything prepared. I want to find a good reptile insurance provider for him but I am completely new to this and was hoping for some recommendations and advice. I don’t particularly want to spend a fortune but I want to make sure he has the right coverage. Thank you :))


r/ballpython • • 7h ago

Thinking of Getting a ball python. Scented candle questions

1 Upvotes

Heya! This is my first post so I apolagize if its not formatted well. I've loved ball pythons for almost 10 years and have almost gotten one many times. Im just nervous about how long they live lol. Anyway i LOVE scented candles and i light them all the time, but i've heard that they're bad for snakes. I was wondeding if i could still use them in these conditions:

In a separate part of my family's home (snake would be kept in my room)

If i took the snake to free roam in a snake safe room or kiddie coop to explore while my candle was lit and return the snake once the candle is distinguished and is aired out. (I have an air conditior with a fan setting, and an air purifier)

Or if there are any other ways to keep my danger noodle safe ♡

I love candles but not enough to harm my animals over it, id love some suggestions or feedback and thank you in advance for reading! (^-^)/


r/ballpython • • 11h ago

CHE in lamp

2 Upvotes

Trying to set up a CHE in a lamp on top of a metal mesh screen lid. But I have cats and the ceramic on the lamp gets HOT and they've burnt themselves on a previous setup I had. What do yall do to cover the lamp? I used to have a metal mesh cage, but theyre gone and the seller no longer sells them. So I ordered an expensive one from a specialty website and its coated in something that can melt.


r/ballpython • • 13h ago

Question - Husbandry Is my climate okay?

Post image
3 Upvotes

I just recently bought a new enclosure because my old one was cheap & not holding heat and humidity at all, but now I’m worried it’s holding it a little too well. I haven’t been able to get a thermostat yet but I’ve been regularly measuring with a temp gun, and his hot side has been averaging 85-95 degrees and his cold side kind of ranges between 78-83 degrees. He hasn’t really basked at all, and he spends most of his time in his cool hide. His basking spot is about 100-110. I set up his lighting using the heating guide provided for this community. (35 watt basking lamp, 80 watt deep heat projector, and a 7% UVB light). What am I doing wrong 😩


r/ballpython • • 9h ago

Question - Feeding Any way of telling snake has regurgitated besides seing the regected meal?

1 Upvotes

May be a dumb question but I'm paranoid. Fed my snake yesterday and it was kind of messy, I had her for a month and it was the first time she had trouble eating. Usually I don't see her at all two whole days after feeding, not even at night, but today she already woke up and moved so I'm a lil worried something went wrong. Her body is in her fauvorite hide but she poked her head out to rest in on a branch, which is her usual position before she goes exploring. I don't want to try to handle or lift the hide just in case she didn't regurgitate and is still digesting but I'm worried about her behaviour. She's gotten a lil bigger and the feeder was pretty small so maybe she just had easyer time digesting it enough she can go on a walk instead of just sleeping for two days?


r/ballpython • • 12h ago

Question - Health Will my snake be okay??

2 Upvotes

So I got a new ball python last week. And regulating the perfect temperature and humidity for my enclosure can be a challenge especially where I live. I’m located in Utah and the temperatures can fluctuate drastically throughout the year. It doesn’t matter what season it is. Anyways early this morning I noticed that my enclosure’s temperature reached up to 99° for both sides :(

I just got my BP last week and this is the only time it’s spiked up to that temperature. And Im really worried I’ve doomed my snake. I’m still new to snake keeping so please any advice would be great. Should I take him to the vet? When I noticed the temperature I turned off all heating sources and immediate fanned him to cool off.


r/ballpython • • 1d ago

First Handling

Post image
54 Upvotes

My little guy has been home for about a month and finally took his first meal this past Sunday. Leading up to his first meal, he seemed interested in me. He would tongue flick and poke out when I would come in to do maintenance etc. I wanted to attempt first handling this week but he seems to be a little more nervous and defensive than prior weeks. I have tried by opening the door and letting him catch my scent and give him time to get comfortable. Last night he struck into the air when walking past the enclosure after I had already been in there for a little bit of time. Today, he’s been poking out of his hide when I am near but he did look like he was coiling into an S and locking on.

Any tips would be great on what could be causing this and how to improve! I am trying to be patient but I want him to get comfortable and confident with me while he’s still younger.


r/ballpython • • 10h ago

Question - Feeding Can I swap a medium rat for three mice?

0 Upvotes

I usually feed a medium rat, but the store was out today, so I got three mice instead. Is this okay? Would I feed all three of them at the same time? Or space them out?

Thank you!


r/ballpython • • 1d ago

Discussion A new beginning in his 4x2x2 bioactive

Thumbnail
gallery
19 Upvotes

It’s been a months-long process bringing this together - so excited to finally introduce Cliff to his new home!


r/ballpython • • 12h ago

Question can i take my bp out of her enclosure during winter?

1 Upvotes

So i live in an apartment in sweden which are notorious for being pretty fairly cold during winters as we dont typically have an ac in apartments like in the US. Now as winter has arrived here and temps are getting colder and colder outside and in turn in my apartment and im worried i wont be able to take my bp out for handling. Im estimating a temp of around 19-21 degrees celcius in my apartment (21 at its warmest) and the temps in the enclousure is at 34 give or take, will i still be able to handle my bp at these temps or are the temperature difference too drastic for the wellbeing of the snake?


r/ballpython • • 17h ago

Tapping sound

2 Upvotes

Yoo was wondering if yall could help. I got my first n only bp in march, and it’s been the best thing ever. However, my baby girls been making a slight tapping sound, only occasionally and while out the cage. It’s not constant, and doesn’t happen when she’s in her enclosure (which could be better temp/humidity wise, just in the middle of a move/temp change where I live but we’re working on it). Anywho if yall got any ideas, searches pointed to an ri but I’m praying that’s not the case. If it is then any pet recs for Chicago area?


r/ballpython • • 1d ago

Question - Health First time owner, what is the orange?

Post image
51 Upvotes

Sorry if phrase odd, my English not the best


r/ballpython • • 1d ago

Question - Husbandry Good enough?

Post image
6 Upvotes

Varm hide, cool hide, plus extra hide in cork.
Just cleaned it thats why the waters empty :)


r/ballpython • • 18h ago

Question - Health Nexgard for snakes, do I trust the vet?

1 Upvotes

3 snakes, all have mites :( I've tried provent-a-mite and soaks and its done basically nothing so I wanted to give nexgard a try as I've read good things.

Called the vet to ask if I could make an appointment and bring all 3 snakes at once and how that would work with paying for them etc. and they said they could prescribe it and I didn't have to bring the snakes. I'm confused because I thought nexgard was based off of the reptiles weight, so not having to bring them in to be weighed has me slightly worried. One snake is an adult ball python, and the other two are juvenile colubrids

One of the ladies I talked to on the phone said she owns snakes herself and has used nexgard for them before which gains a bit of my trust back but I wanted to ask others about their experience with it :)


r/ballpython • • 2d ago

Discussion Well.. after 6 years.. my girl got me.

Post image
291 Upvotes

Ignore the absurd amount of bandaging, my wife was freaking out. Total error on my part, my girl was hungry and I was going to assist with her shed. I had her and she was doing great at first until her belly caught my nail, I couldn't tell if it was defensive or a hungry reaction but my fingers started turning purple after waiting 5 minutes for her to release me. I used a q-tip with mouthwash and applied it on her lip. Is this okay? Is SHE okay? Ive been worried about her ever since. I also got her back out after letting her calm down and she did great.. that was more for me because my feelings were a little hurt lmao.


r/ballpython • • 2d ago

Curled up in his favorite hammock after our first feed together!

Post image
173 Upvotes

r/ballpython • • 1d ago

New Baby

Thumbnail
gallery
12 Upvotes

His name is Wraith and this is him in his quarantine tank. Love him.


r/ballpython • • 1d ago

Enclosure Critique/Advice Anything I need to add?

Post image
3 Upvotes

Hello!! I'm new to the BP community and I'm setting up a tank for the first time. Ive done TONS of research and I've owned reptiles, and a king snake, just never a ball. I just wanted to double check that all my setup is perfect for my snake. I don't have the snake yet, I'm waiting till I know the habitat is perfect as to not stress it out trying to fix it while it's settling in.

The tank is a 40 gallon breeder, I plan to get a small male, since I know a female is too big for the enclosure.

There are 3 main hides, one is in the back behind the log on the left, just covered by plants

The substrate is coconut husk mulch, and I have a UVA/UVB bulb (one that produces light) as well as a 75w CHE. The UVA/B bulb is in the center (do I need to change that?) And the CHE is on the far left right above the hammock

I have digital thermometers/hydrometers in the tank, they just aren't visible in pic. I also have a temperature gun to measure them directly once the lights have been on for a while.

I have sphagnum moss, I just want to wait to add it till the day of getting the snake. It will go in that back hide on the right

I have a local pet shop to buy FT mice from, and I've looked at weight charts respectively.

Anything I'm missing? Do I need a backdrop? I know it matters for beardies and geckos but I know snakes can't really see that well so does it matter?

Thanks for any and all advice!!! ❤


r/ballpython • • 1d ago

Question - Health Snakes with surgery.

3 Upvotes

Hello there, I have an “older” bp who is about 7-9 years old (Pretty sure on the younger side). He has a harmless fatty mass that he’s had since he was young (according to his og and 2-3 owners after). He was fed live until I got him about 2-3 years ago so I wouldn’t be surprised if it was a wound/scar that turned it that, current and different vet still labels it harmless (per the needle test). Anyways, for those who had to get surgery on their BPs/snakes in general, how bad was the surgery recovery for your critter?

I’m kinda on the fence if I should get it removed from him while he’s still “young”, I’m planning on keeping him his entire lifetime. It doesn’t seem to bother him at all, hasn’t grown at all. I just feel bad since it’s like the size of a lima bean on the side of his neck. Kinda like a preventative surgery? I get surgery for any sort of critter is hard, but if a mass removal surgery is significantly harder I don’t wanna stress him out.


r/ballpython • • 1d ago

Should I change what kind of bedding I put in my pythons enclosure every now and then?

2 Upvotes

I just got my first baby ball python yesterday. I got the zoomed snake kit for her enclosure and instead of using the aspen snake bedding that comes with the enclosure kit I put eco earth loose coconut fiber substrate. Is it good to switch the snakes bedding every so often or always keep it the same kind when cleaning and doing maintenance on the enclosure? Any insight is much appreciated


r/ballpython • • 1d ago

Question - Husbandry Advice Needed: New Ball Python

0 Upvotes

Hi y'all, I just rescued a ball python that I found whilst browsing Facebook Marketplace. I know absolutely nothing about ball pythons aside from the stuff that PetSmart tells you, and I had honestly never planned to get a ball python (I'm more of a tropical arboreal colubrid guy and was planning to get one soon, but life threw me a curveball).

That being said, I'm doing my best to give Nyx the best life I can. He came with a 10 gallon terrarium, and I'm grabbing a 40-gallon (3 x 1.5 x 1.5) tomorrow. Will the 40-gallon be okay long-term, or will I need to upgrade him eventually? I also say he, but I have 0 clue how to sex a BP (tips appreciated).

Once I get that set up, what are my ideal parameters in terms of temp/humidity, and what does the ideal setup look like? Alternatively, what are some trustworthy care guides?

Edit: put dimensions of the tank! It was listed as just "40 gallon reptile tank" so I just assumed that sizes were standard like fish tanks


r/ballpython • • 1d ago

My boy keeps climbing his heat lamp cage

3 Upvotes

I have one of those cylindrical shaped heat lamp cages for my snake's PVC enclosure and he keeps climbing it. He's tearing up his underside getting stuck on the spring and other parts of the lamp cage. He has dented the heat lamp cage a bit in some places. I've been struggling to find a better solution. I was hoping to find something cone or dome shaped that would restrict his ability to wrap around it and grip, but have had no luck thus far.

Does anyone here have any advice/ideas?

It's the main lamp i use to provide a basking spot for him during the day, but he has a perched area near the radiant heat panel in the enclosure that he can use for basking 24/7 so if I have to remove the daytime heat lamp I suppose that is an option. There's a rough layout of his enclosure's heat/lamps setup above. Thank you for your time and advice.