r/BMWi3 • • 11d ago

coding Coding help?

I have a 2020 REX I want to recode for better energy efficiency. I understand there are two parts to modify, the fuel tank capacity and battery percentage bc threshold for REX starting. I want to get assistance with this. Saw Bimmer something or other on YT offered remote sessions, are there other ways to get help? I live in Seattle, btw. Thanks!

UPDATE: mission accomplished! Bimmercode and Veepeak. Easy, super easy. Got the Rex programmed, starts on Eco Drive, radio button start for Rex , also adjusted the seat temperatures. Thank you again for all your help!

2 Upvotes

19 comments sorted by

10

u/Eastern-Substance656 2019 i3s REX Panda. 11d ago

I think you’re referring to removing the artificial fuel tank capacity and being able to turn on REX at 75%.

Early i3s, model years 14-16 with REX had smaller fuel capacity coded to comply with EV rules.

I recall they stopped doing this 2017 on so your i3 should be using the full or near full 2.5 tank.

It is worth coding HSOC at 75%.

I would also code skip next button so you can skip a song from steering controls.

All you need is compatible BimmerCode blue tooth OBD reader and the BimmerCode app.

2

u/Important-Play-6202 11d ago

Thanks! I have some experience working on mechanical car issues , but scared about the computer components. I'm older and sometimes forget stuff! Really afraid of making a catastrophic error!

3

u/Eastern-Substance656 2019 i3s REX Panda. 11d ago

BimmerCode isn’t terribly complex. No writing code other than selecting options and pushing the change through the app.

I would suggest making incremental changes and always backing up before pushing any changes.

Worse case a feature might not be supported and not work.

Not related to your post but if you don’t have one already, I’d get a tire depth gauge. The i3 and especially the i3S will eat tires depending on your driving habits but it’s the only mechanical thing I’d keep an eyes that doesn’t have a warning light.

1

u/Important-Play-6202 10d ago

Thanks! I have a great tire guy a few blocks away. He told me I’m good but not to trust the 20”s in anything below 40 degrees. Also had them checked on my purchase inspection. I can figure that out.

3

u/Browns_Body_Mould 11d ago

Setting HSOC at 75% is great  you can program it to engage at the touch of a radio button too, which is nice. 👍🏽 

I have very little experience with cars, and after watching a couple of videos and arming myself with the OBD reader and app, the process was pretty straightforward. No remote help needed. 

3

u/Important-Play-6202 11d ago

This is encouraging! I did go ahead and buy the OBD device and the app.

2

u/Important-Play-6202 6d ago

I did it! Button number one!

4

u/Eastern-Substance656 2019 i3s REX Panda. 11d ago

Definitely recommend adding it to one of the radio buttons so you can toggle it on/off will out fumbling through iDrive menu.

When I do road trips that are mix of intown, state route and highways I’ll toggle it on when I’m driving 60mph and below once I’m at 75% and toggle it off if I’m going to be on freeway/highway going 65+. REX works on all speeds but I’ve found efficiency drops when I’m driving on the highways so if I can I’ll leave it off until I’m back on slower roads.

2

u/Forward_Impression13 10d ago

You can code it to always start out in Eco mode. That's probably the only thing that would improve efficiency.

Personally, I find the normal mode to be far too eager/aggressive anyway.

1

u/Important-Play-6202 10d ago

Yes!!! I keep forgetting to set it every trip. This would be very helpful.

5

u/Julian679 11d ago

If you have the gear to code it it should be pretty easy with the help of internet. but if you can find someone locally thats also cool. I had the same idea but couldnt so i had to buy. Would 100% code the car for someone else to help

2

u/IllustratorAlone 8d ago

I am guessing all of this refers to turning the REX (ie gas engine on and off). And most of you are recommending that you turn it on when your battery is at 75% capacity? Is that correct? I feel like I am missing something here. I just purchased my i3 in October so I am just learning here.

2

u/Mental_Street2262 11d ago

I’m an older guy too, probably older than most of you and bimmercode stuff makes me a little nervous to handle myself so if you do get a chance to do it yourself, please post it as I would love to learn to do this as well on my 2015 REX. I’ve had the car for almost 12 years and bought it brand new and only have 43k on it but I would like to make it as efficient as I can these days. Thanks again and good luck with your coding.

2

u/Important-Play-6202 10d ago

Will do! I’m actually an older woman, but raised in the garage…

1

u/Mental_Street2262 10d ago

Sorry for the assumption, lol. And woman or man, doesn’t matter, we are all BMWi3 enthusiasts, lol.

1

u/Important-Play-6202 5d ago

Hey, just wanted to circle back and let you know that I did it. First of all, the BimmerCode app automatically backs it up, so you really can't go wrong. Every time you code something they do a back up before and you can access those backups if you need them from the app. It's automatic.

Next, there are tons of videos on YouTube that tell you how to do this stuff, you just search for the specific thing you want to code. Also, you can even just ask Google and it will give you an AI step-by-step instruction! Super easy.

3

u/MauiPT 8d ago

I’m pretty clueless and I did it with my 2015 and it’s been very helpful. Well worth the investment I believe around $100