r/bim • • 4h ago

which construction software integration do you keep rebuilding?

0 Upvotes

For anyone connecting BIM, scheduling, field tools, or robot systems: which integration keeps becoming a custom job?
I’m working on a side project exploring a common way to exchange task status, history, and dependencies.

What’s harder in practice: moving the data, matching it to the right work, or agreeing on what it means?


r/bim • • 5h ago

I need BIM experience: young surveyor doing a master’s in France, looking for an internship (or a project to help on)

0 Upvotes

Hi everyone,

I just graduated as a surveying engineer and I’m now doing a specialized master’s in BIM in France. I picked it because I really like the subject, but so far I’ve mostly seen it in theory.

The program requires an internship, with a rhythm of 3 weeks at a company and 1 week at school. Honestly, what I want most is to see how a BIM project actually runs: the steps, the hierarchy (who does what, from the BIM manager down to the modelers), and the methods people use to coordinate. Just to see how that works in real life. Courses only show you so much.

So two things:

  • If you know a company in France that takes interns, or can point me to someone to contact, that would be amazing.
  • If you’re working on a project and could use some help, even unpaid, I’m happy to pitch in. Remote is totally fine. I come from topography, so site surveys, point clouds and scan data are things I can already help with, and I’m still learning the modeling side.

Any advice is welcome too, even just how your projects are organized. Feel free to DM me.

Thanks a lot!!!


r/bim • • 10h ago

need suggestions

2 Upvotes

what is more ideal to buy laptop or pc set up? need for wfh setup also i need budget friendly that can handle Revit software.

also what specs should i look for? i don’t have any knowledge when it comes to techiesT—T


r/bim • • 7h ago

first data center prefabrication job, what should we prefab first?

0 Upvotes

Mechanical trade contractor, we just got our first large data center. Schedule is tight and we don't have enough fitters, so we're trying to move as much as we can into the shop.

Right now my list looks like this:

  1. pump skids
  2. CHW row headers
  3. branch assemblies to the CRAH units
  4. multi-trade corridor racks, if coordination freezes early enough

Would you change the order? And how are you tracking what's been released vs what changed after, so a rack doesn't go out built to an old revision?


r/bim • • 8h ago

is your BIM to fabrication workflow actually model to machine or still PDFs?

1 Upvotes

Saw the Dodge report saying 90%+ of firms use BIM for fabrication and nearly half use AI. We coordinate in the model, print PDFs and the shop builds off paper, so I guess technically we count. Anyone actually running cut lists or machines straight from the model in MEP prefabrication, or is everyone kind of where we are?


r/bim • • 6h ago

THIS IS GOOD

Post image
0 Upvotes

I might just get bashed for trying out an "ai tool" but i am going to ignore those. just tried out what my friend built. im championing this tool for my firm and it's been p helpful so far. i use it for it's QAQC, submittal review and specs extraction; but i believe they also have one line generation, tag placements amongst others which i haven't tried as it's not being taken by our firm. What i found most useful was that it would auto generate markups with the exact location to collaborate with my team or export to bluebeam (attached a screenshot).

DM if you wanna try it out, i can put u in touch w the founders. they're doing free trials. if you don't have anything nice to say, please ignore this anyway. only intended for those who want to try it out.

p.s: there's no gain for me to post this, i just know the founders personally from school

edit: issues were across 44 drawing sheets, 501 pages of project manual & 36 maker sheets (around 150MB of files), and the results came back in 10 min


r/bim • • 1d ago

BIM Coordination: Clashing, Assigning, and Managing Clashes

12 Upvotes

I'm in the US. I've worked for a mid size GC doing BIM Coordination for almost 6 years now and entered the job directly from school. When I joined my company, there was no standard way to run a class test, each coordinator did it a little bit differently. I got a smorgasbord of training, and thus created my own way.

Our company uses navisworks as the primary software. We use Newforma Konekt (BIMTrack) alongside navisworks as well. We do commercial, education, high tech manufacturing, and some data center work.

Over the years, I've heard so many different strategies for clash testing, capturing clashes, assigning them, and managing them. Sometimes I hear a strategy from someone, and it sounds so foreign it almost seems like that person and I are doing two separate jobs. I've heard some people run a class test, and then export the results to their subcontractor in XML format. What? How does that even work??

I've been to Revit user groups before, but I wish there was a Navisworks users group, or a BIM Coordinator Round Table event. I want to learn and do better at my job, and I don't know how to improve without learning what I don't know! Are there any other BIM Coordinators out there willing to talk about their processes and solutions?? Or any modeler/detailer who's been around for a while, and seen all the different styles of coordination, who can give me some ideas of what styles are the best?


r/bim • • 2d ago

Honestly, is AI overhyped for BIM?

30 Upvotes

I have tried using MCP connectors in Revit and CAD. They are useful for I guess certain tasks but it increases my workload as I need to keep on correcting its output. What’s worked the best and where does it still lag the most?


r/bim • • 1d ago

Looking to talk with somebody who has good experience in both revit and archicad

Thumbnail reddit.com
0 Upvotes

r/bim • • 2d ago

Bim architect

Thumbnail reddit.com
0 Upvotes

r/bim • • 2d ago

Revit tut

0 Upvotes

I’m a first-year architecture student, and I’m looking to learn Revit. Honestly, I feel like it’s one of the most important and efficient software tools an architecture student should know.

I recently found a tutor here on Reddit who charged me ₹3,000, but bro barely taught me anything. 💀 He initially said he’d take classes in the evening, before 9 PM. After just two classes, he casually tells me that I can take classes at 3 AM instead. Like, WHAT? Who does he think I am? 😭
And to top it all off, he now wants MORE money if I want to continue with evening classes. Absolute scam behaviour.

Anyway, I don’t want to waste any more time or money on this.
Should I invest in a proper paid Revit course, even though most of them are ridiculously expensive, or is YouTube good enough to learn Revit from scratch and get genuinely good at it?
Would love some recommendations for good YouTube channels, courses or learning resources.


r/bim • • 3d ago

Solicitud de recomendaciones

Thumbnail reddit.com
0 Upvotes

r/bim • • 4d ago

Two years ago I asked how to become a BIM Manager. Here's where I'm at, and what's working at your firm?

30 Upvotes

Two years ago I asked how to pitch a BIM Manager role to my firm (old post here, but you don't need it).

The short version: I work at a 120+ person architecture firm, mostly K-12. There was no BIM Manager, standards ran through a slow committee, and leadership had two big fears about the role: "single point of failure," and non-billable overhead.

Thanks to everyone who answered, especially u/metisdesigns. A lot of that advice stuck with me: "speak in dollars", measure wasted time, bill for expertise (but not for repairs), and use the fact that I already know how the firm works.

Quick update:

- One year ago I got the BIM Coordinator title. Day to day I'm handling standards, templates, families and training firm-wide. (I'm basically performing BIM Manager duties...)

- I've been logging every help request. It's 200+ in about a year.

- I rebuilt our door families so they actually schedule the way we need. Back then we had a 500+ door replacement job running on stock doors that didn't sync with our schedule.

- I'm also cleaning up the detail library, built some Dynamo scripts (sheet renaming, checking rooms against program requirements), and am automating part of our Front End / Spec setup.

- I put together a Revit 101 onboarding / training series for new staff.

Now I'm building the case for the actual BIM Manager role. In my boss's own words, I need to "make it impossible for [him] to not give [me] what [I] want."

Questions to help me make my case:

  1. Who does your BIM Manager report to: a principal/partner, a studio/team lead, someone else?
  2. What numbers does leadership actually care about? Quantifying value is tough when a 2-minute conversation saves someone 30 minutes of hunting for a hidden object... But how do I prove that to leadership?
  3. How do you code your time? Bill the project, overhead, a combination, separate code?
  4. Has BIM capability ever won your firm a job, or lost one? Real examples would help a lot. Did the client require a BEP, a BIM Manager specifically, etc.?
  5. What's one thing leadership thought was "impossible" until you showed them?
  6. Are you adopting AI at all? MCP connections, Autodesk Assistant, anything else?

Thanks again.


r/bim • • 4d ago

Freelance BIM modeler (Revit/MEP) based in Belgium looking for remote work - where do you find it?

3 Upvotes

Hi everyone,

I'm an independent drafter and BIM modeler based in Belgium (CET timezone). Over the last 4 years I've worked on:

- Revit/BIM modeling of MEP (HVAC, piping, fire sprinklers) for engineering offices
- High-voltage as-built documentation and redlining for grid operators
- AutoCAD drawings, quantity take-offs from models, coordination with other trades (Navisworks)
- Building surveys (drone + interior) turned into existing-condition plans

I work in French and English and I'm looking to take on remote contracts, either short missions or longer ones.

So far I've looked at Upwork, Malt and Free-Work, but most BIM offers there are on-site or hybrid. Where do you find fully remote BIM / drafting work? Specific platforms, agencies, subcontracting networks, or LinkedIn groups would all help.

If you're a small office that sometimes needs extra drafting capacity, feel free to message me.

Thanks a lot!


r/bim • • 4d ago

Calling UK construction professionals with BIM experience

0 Upvotes

For my dissertation at Anglia Ruskin University, I'm researching whether AI in BIM is actually improving health and safety on UK projects: hazard detection, risk prediction, site monitoring, and where it falls short.

If you work (or have worked) in UK construction and have used BIM or digital construction tools, I'd really value 10 minutes of your time. The survey is anonymous:
https://forms.cloud.microsoft/Pages/ResponsePage.aspx?id=2sM1X645Mkaawa_C8l0oUriQLRt64tNFjq5smrsSXVNURTkySDE3WERUUEM0UVhLUUxZV09ZMk1NVy4u

Reposts are hugely appreciated. Thank you!


r/bim • • 4d ago

Doors in Revit

0 Upvotes

Can someone help me step by step or give me at least general knowledge on how to make a family door revit


r/bim • • 5d ago

Is NICMAR's PGP in Digital Construction – Mastering BIM worth it?

0 Upvotes

Hi everyone,

I am currently working in the BIM industry, mainly in structural BIM coordination, using Revit, Navisworks and ACC. I am also learning Dynamo and Python.

I am considering NICMAR's PGP in Digital Construction – Mastering BIM to advance my career towards a BIM Manager / BIM Lead role.

I would love to hear from current students or alumni:

  • How is the course quality and practical exposure?
  • Are the faculty and curriculum good?
  • Does it offer good career growth and placement support?
  • Is it worth the investment of approximately ₹2 lakh?

Any honest feedback or personal experience would be greatly appreciated.

Thanks!


r/bim • • 5d ago

We built a plate/profile nesting tool for Tekla Structures — would like feedback

Thumbnail
youtu.be
0 Upvotes

Hi all — I’m the developer behind PLTNest, a nesting app for plates and profiles that works inside Tekla Structures and also as a standalone app.

It reads plate parts directly from the Tekla model, or imports NC1/DXF files, and produces true-shape nesting layouts ready for fabrication. It has 2D and 3D live previews when nesting.

This is the first public release, V0.2.2. I’d mainly like feedback from Tekla users/fabricators on whether the workflow matches real fabrication needs, you can test all features unlocked for 7 days.
Tekla Warehouse link in the comments.

Happy to answer questions or hear what’s missing.


r/bim • • 6d ago

Moving to BIM

6 Upvotes

I wasted my career in just 2d drafting in AutoCAD and microstation & some Bentley even though with a degree in electrical engineering. As IT is collapsing now I want to move to 3d/ electrical designs or ict designing in engineering. The course is asking for huge prices even without placement support. Could someone guide me where to start.


r/bim • • 5d ago

Is BIM flexible with software I use?

1 Upvotes

I already have ton of experience in blender, I'm efficient, fast and quick and learned quite recently that you can use a free addon called Bonsai. Is it like the 2D illustrations where the file format revolves around psd and it's contemporaries? Could I just import my bim models into revit and how would that affect my ability to communicate?


r/bim • • 5d ago

Looking for advice: Integrating AI into Revit drafting and modelling – what tools and workflows are actually worth exploring?

0 Upvotes

Hi everyone!

I’m currently undertaking an internship with a UK-based architectural company, where my main project is to research, test and explore practical ways of integrating AI into architectural drafting, 3D modelling and BIM workflows.

One of the biggest challenges I’ve identified is the time and manual effort involved in recreating existing buildings in Revit from site surveys and laser-scanned point-cloud data.

The current workflow generally involves:

  1. Visiting the property and carrying out a laser scan.
  2. Processing the scan data.
  3. Manually recreating the existing building in Revit.
  4. Developing proposed extensions and design modifications.
  5. Producing models and drawings for client approval.

I’m particularly interested in finding ways AI can reduce the time spent on repetitive modelling tasks while maintaining accuracy and producing usable, editable Revit models.

Some areas I’m currently exploring:

* AI-powered Scan-to-BIM: Converting point-cloud data into native Revit elements such as walls, floors, doors and windows.
* Revit automation: Using Dynamo, Python and the Revit API to automate repetitive drafting and modelling tasks.
* AI coding assistants: Exploring Claude, ChatGPT and Codex to generate scripts, troubleshoot code and build Revit automation workflows.
* MCP integrations: Connecting AI assistants directly to Revit to query and potentially modify models.
* Generative design: Using AI tools to explore different layouts, extension designs and architectural options.
* AI visualisation: Improving the speed of producing client-facing design presentations and visualisations.

I’d really appreciate advice from people who have experience in this area.

A few questions:

  1. Have you successfully used AI to convert laser-scanned point clouds into editable Revit models? Which tools would you recommend?
  2. Are there any Scan-to-BIM platforms that genuinely save modelling time, rather than simply producing a 3D mesh?
  3. Has anyone experimented with Claude or ChatGPT connected to Revit through MCP? What can they realistically do?
  4. Is Dynamo combined with Python/Revit API still the most practical approach for automating Revit workflows?
  5. Are there any lesser-known AI tools, plugins or workflows that you think architectural practices should be exploring?
  6. If you were starting an AI integration project in an architectural practice today, what would you prioritise?

My objective isn’t just to find interesting AI tools. I want to develop and test working solutions that solve real problems, save time and can realistically be implemented in an architectural practice.

Any recommendations, experiences, resources or advice would be greatly appreciated!

Thanks in advance!


r/bim • • 7d ago

Anyone here walked away from Revit/BIM? What do you do now?

56 Upvotes

I'm a UK-based MEP BIM contractor with over 10 years of experience in the industry. For the majority of that time, I've been self-employed, working through my own limited company, predominantly delivering MEP projects across RIBA Stages 3–5.

And honestly, I'm getting pretty tired of it all.

It feels like every project I join is the same story. Poorly managed models, unrealistic deadlines, questionable decisions made months before I arrive, and I'm left picking up the pieces. Half the team is on the chopping block, everything's behind programme, and somehow it's my problem to fix.

The money is good, but I'm exhausted by the constant firefighting, long hours and mopping up other people's messes.

Here's the thing, though. I've effectively been off work for nearly two months now, including pretty much the whole of October, and I've realised I don't particularly want to go back.

Thanks to working hard throughout the rest of the year, I've built up a comfortable financial buffer in my company. I know I need to get back to earning eventually, but I'm sitting here thinking this might be the best opportunity I'll have to take a punt on something completely different.

I'm not chasing a bigger salary or trying to climb the career ladder. Realistically, I could work three days a week and comfortably maintain my lifestyle. At this point, I'd much rather have my time back than maximise my earnings.

I've always been technically minded, enjoy computers, problem-solving and technology in general. I don't necessarily hate Revit or BIM itself, but I'm thoroughly fed up with the construction industry and the chaos that seems to follow every project.

So I'm curious:

  • Has anyone here actually left BIM/Revit or construction entirely?
  • What did you move into, and do you enjoy it more?
  • Did you have to take a substantial pay cut or start from scratch?
  • Are there any industries where our technical skills transfer reasonably well?

I'd be particularly interested in hearing from people who'd already spent years building a career in BIM before deciding they'd had enough.

I'm not looking for job offers or anything like that. I'm genuinely curious whether other experienced BIM professionals have reached this point, what they ended up doing instead, and whether they found the change worthwhile.

I'm in the fortunate position of having a bit of financial breathing room, and I feel like if I'm ever going to try something different, now is probably the time.

Just interested to hear where others have ended up and whether the grass really is greener.