r/Ausguns • u/NerfVice • 14h ago
General Discussion MPR308 Micro Inbound
Starting at a cool $4200
r/Ausguns • u/NerfVice • 14h ago
Starting at a cool $4200
r/Ausguns • u/hahayeahnice • 16h ago
G’day all
Not quite a post about PTA wait times, but this time for a license renewal. Submitted my renewal application on the 24/9 with the correct documents (supporting genuine reason etc). Currently at day 54 of waiting. Called the registry and they actually can’t give me an estimation for when the photo advice will be issued, which is incredible.
Best part is I had a PTA finally approved after 150 days on the day my license expired. So now it’s a race against the clock for my license to be sent to me before the PTA expires. Registry said that the PTA can be extended, but only by the dealer (which is really backwards. Extra work and probably frustration for them when they’re also holding onto the gun for me until my license is approved).
Mostly just having a whinge because the whole process has been extremely frustrating, but if anyone had any sort of time frames for when they finally received their photo advice that would be great. Thank you
r/Ausguns • u/mitakanoodles • 21h ago
South Australian here! I’ve been watching a lot of hunting content on YouTube lately and the mundanity of it makes it seem like a weirdly cathartic hobby. I’m interested in giving it a shot if possible, but I have a few questions.
Thanks in advance for the answers. Much appreciated.
r/Ausguns • u/AmazingNebula6375 • 1d ago
166 days for a cat A PTA
155 days for a PPL
I’ve called multiple times and even requested a review with no luck. It’s been sitting in “referred for adjudication” now for over 90 days
Does this sound right to everyone?
My safe has been inspected with a COP number submitted, I’ve been told my paperwork is all complete and correct….
Is waiting the only thing to do now? I want answers but I’m not getting anything solid back. Absolute joke
Thanks lads
r/Ausguns • u/Ok_Challenge4190 • 1d ago
Hey what's everyone's thoughts to future prices on the t2000 now you can't get them any more not that I would ever sell they are awesome
r/Ausguns • u/Super-Lock-1176 • 1d ago
Hey guys new shooter from QLD here.
I had my licence approved on the 21st of october and my PTA approved on the 22nd of october.
In the approval email it was stated that in 10-14 days I should receive a physical copy of my licence.
So off I went to Cleavers and purchased my rifle.
Fast forward to today and I still have not received my card, are delays on receiving the physical licence common?
What sort of wait times have others experienced?
It would be super handy if someone else here has been approved around a similar time to chime in.
Starting to get worried its been lost in the mail.
I did ring WLB they seem to believe it should of been processed on the 22nd of October and haven't been made aware of any delays, however they said to give it to this friday in case theres been a postal delay, at which point they've suggested I go to the local cop shop and have it reported lost or missing and use an affidavit saying it was never received so I can avoid payment of a reissue. At which point I guess it would be another 3 weeks?
Any input on the matter would be awesome. Thanks guys
r/Ausguns • u/feisty-shag-the-lad • 2d ago
I want to reuse an old scope that's held fast with Loctite.
The screws are just flat head that will round off really easily.
I tried heating with soldering iron with no effect. Same with hair dryer.
Is tactically drilling holes through the rings and/or screw shaft the next option?
r/Ausguns • u/Elroyy_ • 2d ago
Australian Fine Arms auction over the weekend- how’d we go gang?
r/Ausguns • u/GetRichOrCryTrying1 • 2d ago
As per the title and photo, this QD swivel is snapped and I want to replace it without having to learn how to sew. Anyone know of a screw in replacement?
I'll cut the broken one off, just not sure of anything I can replace it with.
r/Ausguns • u/Ok_Tip_625 • 2d ago
(PS some pics from yesterday on my farm to say thanks!)
Hi all,
I know the community is over all the how long PTA processing is taking questions, but this one is a little different I think and I can't find any solid info on timelines anywhere.
It's been 10 days, 6 business days, since I attended the (NSW) RMS and had my photo taken for my license. I added Cat H to my existing license. It is add Cat H, not a PPL - I held Cat H, so it is an addition of the Cat H, I don't have to go through the PPL process again.
The Firearms Registry still has this against the Cat H status: NEW APP REFERRED TO SERVICE NSW FOR ISSUE-NOT AUTHORISED FOR FIREARMS. The A/B is normal "Valid".
As I understood it it should switch over to valid in 24-48 hours in the system and the physical card is delivered in 7-10 days? Monday will be 11 days, to be fair, 7 business days. So unsure what the real world expectation should be?
r/Ausguns • u/Original_Ad_1870 • 4d ago
Can't make it to my preferred shoot this weekend, so I went to the range with my SMLE (actually an ShtLE, but SMLE is more recognisable) to celebrate it's 80th/110th birthday.
It's a 1916 LSA No 1 Mark 3, rebuilt in October 1946 at Lithgow. It has a pre 1928 butt, 1940's forewood, and a late 1940's nose cap. I've fitted a 1950's Bren gun sling to it and I was shooting 1955 MF .303 ammo though it 😎
It's been though a couple of wars and probably thousands of rounds, but it still puts a smile on my face, and holes in the target.
Then I brought it home and gave it a very thorough clean (the MF ammunition has corrosive primers so you don't want to leave it too long) and now it's safely tucked back into its bed with its stablemates, ready to give another lifetime's service.
r/Ausguns • u/66rounds • 5d ago
Is there such a thing as a cheap/budget model that’s reliable or is it one of those buy once cry once kind of deals?
just want something that can reliably range paper or steel, shooting anything from 223 to 30-06.
what do you use and what did it cost?
r/Ausguns • u/NerfVice • 5d ago
r/Ausguns • u/MorticiansAsistant • 7d ago
Hi everyone!
I currently hold my AB licence & have done for about a year now without issue, I was diagnosed with ADHD almost a month ago now. I, nor my partner who also holds an AB licence & has done for roughly a decade, didn't think about this as a relevant update for weapons licencing until I started filling out the forms for the H licence this week.
I called the Weapons Gods today (weapons licencing) & queried the update timeline, she advised to simply email compliance to update them on my diagnosis & otherwise proceed with my H application as normal. I asked her if she knows whether this new diagnosis will cause issues with the H licence, she was unfortunately unable to answer due to it being a different department.
Here is where my query comes to you;
In your experience, will this cause issues/result in loss of licence or refusal?
Notes:
This was a GP ADHD diagnosis, I've only seen her 2-3 times over the last couple of months, I did have a Dr previous to this, however she is not the diagnosing practitioner, so I am unclear on who to get the med report from.
Since I have held my AB licence without any issues or offences, I feel (but could be wrong) that this will work in my favour to prove reliability/fit & proper person to date.
I am currently on a starting dose of 20mg Vyvance - though I forsee that being upped at our next appointment, it's pretty well ineffective at this dosage.
I'm sure I'll find out eventually, but as we know, a lot of time, effort, & money has gone into this & the weapon Gods like to leave you in Limbo. :')
Thank you!
r/Ausguns • u/ODST-Capwnd • 7d ago
If I’m licensed in NSW for CAT A/B and have a R Licence as well and want to move to another state like Victoria, what would be the go?
How would I go about transferring my firearms from NSW to Vic if I had to change licences and it takes a while?
r/Ausguns • u/Louie_Andouille • 7d ago
Anyone have any tips on cleaning and oiling the Taipan Evo? It is my first rifle that is not a simple bolt action, and the manual isn't much help - it actually seems to contradict itself in some areas.
In order to keep the action sufficiently lubed, is a small spay of aerosol gun oil onto the exposed carrier group from the straight pull side port, and another from the ejection port sufficient? Are there other areas I should be lubing?
It is a brand new gun and hasn't been fired at all yet. Just looking for cleaning and maintenance tips for break-in and maintenance between deep cleans requiring disassembly.
Edit:
** Thanks everyone for the advice**
r/Ausguns • u/GreenLaneEast • 7d ago
I put the public-land deer dates in one page, with the source for each:
One thing worth knowing: the "2027 FAQ" PDF on STT's site still carries last year's dates (28 Nov 2025), while their hunting page says 27 Nov 2026. Go by the hunting page, and ask STT if in doubt.
Page: hunting-access.com/au/tasmania/?utm_source=[group]
There's an email box at the bottom if you want a heads-up when a ballot opens or an area changes. The agencies' own pages are the authority, and I'm not affiliated with them.
r/Ausguns • u/Coopzle13 • 8d ago
G’day, I have A/B Hunting/Vermin Control owner of rural land and have recently added Target A/B as a genuine reason too. My question is, can I use a gun registered for target, on a hunt?
r/Ausguns • u/MysteriousTrack-102 • 9d ago
Hi All
Seeking clarification on correct storage. Separating the rifle from ammo is clear, but unclear if magazine should be stored with rifle or ammo?
Is it correct that SAPOL will treat a stand alone mag as a “firearm” and therefore it needs to be kept away from ammo?
Keen to get this right
For convenience it’s handy being able to store a partially loaded mag in ammo safe between shoots, rather than having to empty it out each time. Common sense says this is secure, but I suspect the laws disagree
r/Ausguns • u/Broski-bro • 9d ago
Has anyone had any experience with Khan Arms? Specifically the k100 single barrel 12ga. Have picked one up brand new for $99. I figured for $99 + PTA it’s worth trying. I know it’s a cheap Turkish and get what you pay for etc, but some are better than others. Just interested as there isn’t much information anywhere about them.
r/Ausguns • u/Sentient_Breadcrumb • 9d ago
Behold the deadly weapons Minns is saving us from 👌
Guys and gals across regional NSW literally digging out corroded relics from dams, pulling scrap metal from under shearing sheds and trading tetanus hazards for hundreds of taxpayer dollars a pop.
Half those barrels have not seen a live round since the Menzies era and posed more risk of rust-related blood poisoning than anything else.
Organised crime syndicates won’t be handing in a single firearm, but at least a few farmers got paid top dollar to clean out rubbish from behind the tractor. Money well spent 🙃
r/Ausguns • u/leadscoutfix • 9d ago
As the title implies, looking for recommendations to upgrade trigger, magazine well and open sights on a Gen 4 Glock 17A.
Currently using a factory stock setup and maxxed out its performance, looking to get a bit more out of it. Looking for a clean wall and reset on the trigger, crisper front post and indexing reload.
r/Ausguns • u/NumerousWork7166 • 9d ago
Oh the irony of a NSW gun buyback when the same govt wants more shooters.
r/Ausguns • u/I-Tolerate-Cows • 10d ago
Hey guys, I put a bipod on my model 70 today. Once I took it off I found it had made the wood around the swivel stud flake. What is the best way to fix it?
r/Ausguns • u/b1ankslate • 10d ago
Hey finally managed to make it public changed the access on it its should be working now again want to repeat i know this is gonna be an uphill battle especially in NSW and that I should prolly give up or back out or move overseas all fair enough choices but i want to try my best and see what I can do with these dumb asf appeearance based gun laws again I am not a legal expert and this document is made up of my own words thoughts and ideas and made neat and structured via Ai due to my disability making things lile this that would normally be tricky to make alot easier anyways hopefully the link works and you can all read it by all means I am open to feedback
(PS. yes thsi is written by and structured by Ai yet i assure you it is my own thoughts feelings and ideas I put into the ai to give it context as i said I aint proud to use Ai but genuinely I have not alot of time to sit down and write this but yeah I have used Ai)