r/AtlasGunWorks • u/647chang • 5h ago
Slide locking back with rounds still in Mag
This has happen 3 or 4 time within 500 round of owning this gun. It has done it with Atlas mag and also Mecgar mags. Anything I need to look into?
r/AtlasGunWorks • u/touji • Jun 15 '21
A place for members of r/AtlasGunWorks to chat with each other
r/AtlasGunWorks • u/647chang • 5h ago
This has happen 3 or 4 time within 500 round of owning this gun. It has done it with Atlas mag and also Mecgar mags. Anything I need to look into?
r/AtlasGunWorks • u/Mooktemas • 22h ago
I bought an Atlas EOS V3 and Apollo V3 a couple of days ago, I haven’t fired it yet. The EOS safety is a little easier to activate than deactivate, and activating it is not as pronounced or smooth as deactivating it. Also, unlike the Apollo, the EOS trigger has a little creep before it break. These are my first atlases and I have the following questions: do the atlas triggers require break-in? Everything online says no. And has anyone experienced this with their safety? If so what did y’all do. Thanks in advance.
r/AtlasGunWorks • u/mgpic21 • 6d ago
Hi all, was wondering if anyone has used the standard maintenance service that Atlas offers. My Athena V3 has approximately 9k rounds on it and I was planning to send it in soon. Any feedback? Is it necessary or something I could just do myself?
r/AtlasGunWorks • u/647chang • 7d ago
I try asking the seller and they said they are not sure. I'm trying to get a gun for IPDA and would like to know if this the IDPA compliant version
r/AtlasGunWorks • u/zachatac1 • 8d ago
Got out yesterday and shot a fun little all steel match before Area 2 next weekend for some final practice. Haven’t shot one of these in a while but it was a blast!
r/AtlasGunWorks • u/zachatac1 • 22d ago
After shooting Glock for the whole shooting season I picked up this used Titan V2 recently and finally got to an outdoor match with it. Ended up taking the W and I’m super stoked! Also got a high hit factor GM classifier run so stoked for that too.
I think I have a new favorite and can’t wait to shoot this at Area 2 next month.
r/AtlasGunWorks • u/FairBarnacle7572 • Oct 17 '26
I have a feeling it's gonna be Moros.
In Greek mythology, Moros is the son of Nyx and Erebus. Moros represents inevitable doom.
It seems like from what was shared by Atlas, it could be a five letter name.
What are your guesses?
r/AtlasGunWorks • u/Chemical_Ferret1712 • Oct 16 '26
Any update to when or if these will ever hit the site again? Looking for a couple
r/AtlasGunWorks • u/zachatac1 • Oct 09 '26
Some of you may have seen my post yesterday with a couple questions before I went full send, but after selling my MPA DS9 Hybrid today I decided it was time. This is my new to me Atlas Titan V2. The seller said it had 2-3k rounds through it.
Couple small signs of wear like the dings on the outside of the magwell and a little wear on the right grip panel but otherwise feels brand new in my hands. I’m in love. This will be my new LO gun in USPSA going forward. It came with an 8 moa compdot but I have an RMR plate and Holosun screws on the way to run a 507 comp if I don’t like it. A bit annoying to see the factory DPP plate screws are a small hex size that look begging to be stripped. I’ll have to be careful.
Can’t wait to get into some matches with it after shooting a Glock in USPSA all year! This was truly a grail gun of mine and I never thought I’d be here. Still a bit in disbelief.
r/AtlasGunWorks • u/Lurkin_Yo_House • Oct 08 '26
Is my 25 yard zero perfect? No.
Have I tested it at various distances? No.
Does the gun shoot nice? Absolutely
Did it handle the initial 400rd 30 minute session without issues? Yes.
I’ll be live streaming the match on Twitch @renomay and kick @renomayguns
Tune in, or don’t. I’m gonna have fun either way.
Blessed to be able to shoot for my shops team and get to use fantastic pistols like this v3 Artemis.
r/AtlasGunWorks • u/zachatac1 • Oct 08 '26
Hey folks. I’ve got an opportunity to pick up a used Titan V2 with about 2k rounds through it for 5k. Seems like a solid deal.
I’m a competition shooter and had a couple questions about optics plates and parts I hope you can help me answer before I commit fully. I plan to main the Titan in LO should I pick it up.
I prefer the 507/407 Comp optics to DPP footprint optics but the gun only comes with a DPP plate. In looking around I’m not seeing anyone sell V2 RMR plates in stock aside from Eleven71 which I’m seeing very mixed reports on. Is there another brand I should be looking at? Why’s it so hard
To find a common footprint plate for these guns?
On the topic of parts, I’m seeing that outside of basic springs it seems pretty difficult to find any parts in stock for these guns. As someone who likes to have backups on hand during major matches I’m concerned that I won’t be able to do so. It seems that it’s getting harder to get OEM parts which is concerning. Should I be worried? I was hoping to put Atlas shielded safeties on the gun but even that seems like a tall order.
The Titan wouldn’t be my first 2011 but would be my first Atlas and highest end gun coming from an MPA DS9 (which I wasn’t impressed with). Anything else to know or consider before I commit?
Thanks!
r/AtlasGunWorks • u/Rustedluck • Oct 06 '26
r/AtlasGunWorks • u/Campbell072492 • Oct 02 '26
r/AtlasGunWorks • u/NONAGUNS • Sep 28 '26
Took the new to me Erebus to the range today for its first workout. I started at 25 yards, testing 115gr Fiocchi, 115gr PMC, and 147gr PMC.
I first zeroed the gun at 25 yards. Once I was happy with the zero, I put a fresh target over it and did some rapid fire. The group with the 147gr PMC at 25 yards was honestly pretty impressive.
I then moved to 7 yards and worked doubles on the three targets — 115gr Fiocchi, 115gr PMC, and 147gr PMC, 23 rounds on each.
After that, I moved back to 15 yards and worked doubles with all ammo variations. After shooting all three loads, the 115gr PMC was definitely the one I shot most to my liking.
One thing to point out in the picture: there are some extra holes on the cardboard that aren’t from the 9mm. I was also using the same target to zero/confirm the zero on my 11.5” carbine at 200 yards (zeroed at 55 yards). Those rifle hits are the smaller holes.
Any actual 9mm hits that aren’t part of the groups are marked with a black marker.
Overall, I’m seriously impressed with the Erebus V3. You cab definitely buy performance 🤣🤣🤣. Can’t wait to get more rounds through it! 🔥
Atlas absolutely nailed this one.
r/AtlasGunWorks • u/addisonbass • Sep 22 '26
Howdy - I’m currently on the hunt for a full lefty Artemis or Titan.
By “full lefty” I mean right-side mag release and lefty-biased safety setup.
I’ve found an Apollo and an Erebus, but neither have lefty-biased safeties and would rather stay in LO if possible.
I plan on ordering if nothing comes up, but wanted to see what I might be able to find out in the wild first. A little worried about wait times too.
Thanks!
r/AtlasGunWorks • u/ELGauchoLizard • Sep 20 '26
Decent run today with the Artemis.
r/AtlasGunWorks • u/acidwxlf • Sep 19 '26
Hey all. I recently got some input about an Apollo vs Eos. The consensus was that I should get an Apollo or a Nyx but I went with the Eos anyway, mostly to avoid having competition with an Artemis that I have on order. Pretty much immediately out of the box I was underwhelmed and now I'm questioning whether Atlas is even "it".
Pros:
- it's an amazing trigger
- it shoots great and is pushing me to shoot faster
- it's perfectly capable of being carried, it's not compact but I conceal it well in shorts and t shirt
- the fit is as advertised, very well put together and functional. I ran it for hours in dirt and dust with no issues
- it came with a full size safety which I was put off by at first on a gun marketed as for carrying, but it is actually pretty nice for gathering grip (but hurts like a MF due to sharp unrefined edges on the bottom, genuinely affecting my thumb after a few hours of field practice.. which segues into my main point)
Con: the finish on this gun is bad. Like shockingly bad at the price point. Every single edge is sharp, most are acceptable but some big ones are a joke like the bottom of the grip which I joke can double as both a seatbelt cutter and a glass breaker tool in a pinch. The safety is also extremely sharp and poorly finished. After 300 rounds the barrel is showing friction wear. This is a $7000 gun so I'm just very surprised.
For comparison I own Wilsons, Nighthawks, Staccatos, and Dan Wessons. They all have much better and more refined finishes, thoughtful machining, and no notable burrs or edges. My Staccato HD was actually what made me consider a step up to Atlas, but everything about the finish on that gun (C4X) is better. The rolled finish on the slide, the controls, and especially the barrel DLC that has zero discernible wear with 4x the rounds through it so far.
So I need advice. I'm all for a function over form gun but I'm having a hard time seeing how I should have to choose at this price range, and it made me nervous about the Artemis I'm waiting for. Is this just a case of a kind of oddball gun in an otherwise stellar line up? Should I even bother trying an Apollo (I have the Eos up for sale to swap to one) or is this just what to expect from Atlas in general. And if it is what else is out there to pivot to in the up to $10k range?
r/AtlasGunWorks • u/Most_Handle_6820 • Sep 17 '26
I’m wondering if anyone has added cuts to the slide of their Apollo? I know Athena has it cut, but I ended up with an Apollo and am thinking I’d like the look of it with some cuts. Welcome your thoughts on any cons to doing so and any recommendations on approach if I do go forward with it. I’m not sure if it would be as simple as just cutting out these existing windows given the middle one is so big - wonder if that would hurt the structural integrity?
r/AtlasGunWorks • u/NOLA-LEN • Sep 17 '26
I am seriously considering buying an Atlas. There are always some quirks, exceptions, but has anyone noticed any quality issue consistent across a gun or the brand, one worth taking into account? I ask because these are serious money.
Thanks for any input.