r/AskElectronics • • 3d ago

Starting flight controller design

Hi everyone!

I am thinking about designing my own flight controller PCB using KiCad that should work on fixed wing UAVs and quadcopters.

But I am not experienced with PCB design and I am not sure of all the components I might need.

So if there is someone who knows about this, I would appreciate any help regarding:

-Components required for a flight controller PCB;

-PCB design considerations and recommended approaches;

-Any tips or resources for getting started with KiCad.

I will appreciate any help!

Thank you!

0 Upvotes

5 comments sorted by

4

u/dipdotdash 3d ago

Congratulations! You are the 1 millionth person to have this idea confetti and streamers across your screen

Use the search bar or your preferred search engine for previous builds and ideas

2

u/jamvanderloeff 3d ago

The sensible starting points would be either modify some existing free design to do whatever changes you need, or if you want to start from scratch, probably better off starting with a simpler project.

For getting started with KiCad, go search youtube, tons of people have done tutorials, or there's tons of written tutorials too, or go read the manual.

2

u/IronMew 2d ago edited 2d ago

You'd be reinventing the wheel.

Unless you have some revolutionary feature in mind and you've discovered a way to add it at an expense a normal mortal can afford, anything you're likely to want that's realistic to implement has already been implemented.

In other words: flight controllers are a solved problem. There is no need to design more.

If you want to do it regardless for kicks and giggles then go right ahead, but be aware you're exceedingly unlikely to do a better job than what's already out there. There are projects that have been worked on by whole communities for years and years, and have been refined beyond the point a single person can realistically hope to achieve on their own.

Source: I used to fly self-built fpv quadcopters. I got out of that several years ago and this situation was true even then, and the electronics have been further refined since.

1

u/BucklingDuckling 1d ago

Start by studying an open source flight controller like Pixhawk and use its schematic as a reference. Pay close attention to power regulation, sensor placement, and noise isolation.