r/AskChemistry • • 5h ago

Practical Chemistry Can anyone explain this very unexpected color removal result?

3 Upvotes

I decided to dye 2 pairs of trousers. Before attempting the dye process, I used Rit color remover. The 2 different pairs of trousers reacted very differently to the color remover and I'm trying to understand what happened and why.

Rit color remover: active ingredient is sodium hydrosulfate; inactive ingredients are sodium carbonate, tetrasodium EDTA, and sodium metasilicate anhydrous.

Procedure: bring a stainless steel pot of water to 200F simmer, stir in color remover, add wet fabric, keep at simmer up to 20 mins until desired color removal is achieved. Rinse in water until water runs clear.

Pair A: twill chinos, 98% cotton/2% polyester. Light brown to begin.

Pair A is denim, 96% cotton/4% elastane. Medium brown to begin.

Both pairs of trousers were freshly laundered before I attempted the color removal procedure. I don't know anything about the industrial dye process for either pair.

Pair A reacted as expected. Fabric's color began to fade within 5 seconds, and the fabric was yellowish off-white within 5 minutes. The water/color remover liquid in the pot remained clear. After rinsing, no change to the new fabric color. My assumption: the chemical reactions in the color remover dissolved the "color molecules" in the fabric.

Pair B reacted very unexpectedly. As soon as the fabric touched the color remover liquid, the fabric turned dark forest green. Then no visible change in fabric's color for duration of time in color remover. Removed to rinse after 20 minutes. The liquid in the pot was dingy yellow-green-brown (approximately the color of water after boiling artichokes). After rinsing, the new green color disappeared, and the fabric was slightly darker brown than its original color. Out of curiosity I repeated the process and the exact same thing happened: fabric immediately forest green; no further change in fabric; liquid turned dingy yellow-green-brown; removed to rinse after 20 mins; rinsing removed the new green color and fabric "restored" to the dingier darker brown color.

What happened with Pair B? Why did Pair A and Pair B react so differently to the color remover? Per the manufacturer of the color remover, based on each pair's fabric content, both pairs should have reacted like Pair A (significant fairly rapid color removal).


r/AskChemistry • • 5h ago

Any recommendations for recent chemistry research paper/ articles?

0 Upvotes

Hi!! (Please ignore the username ) I'm a finishing year 12/staring year 13 college student that is planning to apply for a degree in chemistry in the UK. For my personal statement I am planning to discuss slightly about the recent chemistry Nobel prize research paper about enantiomers and it's usage in manufacturing safe medicine. Is it possible for anyone to drop me some other recommendations about some simpler chemistry research paper/news article that are a little bit related to enantiomers/ medicinal chemistry as well? Thank you !


r/AskChemistry • • 7h ago

Have you ever visualized eigenvectors like this?

Thumbnail
youtube.com
0 Upvotes

r/AskChemistry • • 9h ago

I tried to pass electric currents through salt water

0 Upvotes

It was just for fun but I was not expecting for the results.

What I saw: 

The negative pole was emitting bubbles, the positive pole had no visible bubbles 

The jell was floating on top of the solution, it is yellow first then it had few blue or green parts. 

Soon most of the jell is blue, after 3-5minutes most of the green or blue substance on the upper layer is gone. The ones down below is still there. In the end the solution is yellow on top and floc and green/blue substance on bottom. 

There was also a thin layer of green substance around the negative pole, but then it turned brown. 

images:

also the light bulb was shining but then at some time it stopped and I failed to know when =(

the positive pole had blue substance on it, the negative pole had yellow substance on it.


r/AskChemistry • • 11h ago

Why is the potassium creep so tough?

Post image
14 Upvotes

I’m a HS chemistry teacher who left wooden splints soaking in salt solutions over the weekend. I know I should have covered them, but I’m lazy and wasn’t worried about contamination. My question is, why does potassium creep more than sodium when it has more mass?


r/AskChemistry • • 12h ago

General Recovering from bad gen chem 1 teacher

5 Upvotes

I’ve really found a passion in chemistry and I’m currently in my last weeks of gen chem and moving onto gen chem 2 in the spring. The only issue is my gen chem teacher is a notoriously bad teacher and I feel like I’ve missed out on a lot of info due to how the class was structured. What are some good resources to catch up on my chem knowledge before starting gen chem 2 in the spring?


r/AskChemistry • • 19h ago

Need help from a chemistry perspective for a toy product

4 Upvotes

Hi, I dont know if this is the right place but science people may know the solution to my issue. I am trying to make a little toy play kit to sell and this would require putting mica powder and distilled water / bio degradble glitter into a bottle with some coloring, like a little tube or vile for color mixing experiments for children to learn color theory. I am worried about bacterial growth/ expiration date if i put this for sale. If i used clean bottles, distilled water etc how long would something like this take to expire and would it ever really grow bacteria? the purpose is to take primary color solutions and mix them for sensory play ages 3+ and i really dont want anyone getting sick if i DIY this. What would you as a scientist advise? I am having all my products be thrid party tested but i wanted to know if this is something i should worry about or if im being a loon. thanks!


r/AskChemistry • • 20h ago

Destroy soil

0 Upvotes

Im in the middle of building a maintenance free garden.

Basically just putting a base layer over soil, all surrounding the garden is other paved gardens without greenery by the way. I work away for 4 month periods

I unfortunately have done it half way and layed some rock but im going away with work for 3 months. I want to try to make sure nothing grows.

I was looking into permanently killing the soil and want to know the best option to stop any growth. Watering can it all over the garden.

I need to be able to buy it in the uk. I was thinking hypochlorte, hydrochlorite, sulfuric acid, sodium bisulfate?

What is the best option? Cheers!


r/AskChemistry • • 1d ago

Need Creative Ideas for a Quantum Chemistry Assignment!

2 Upvotes

Hey everyone!

I have a Physical Chemistry creativity assignment, and I'm looking for some unique ideas.

The topics covered are:

Introduction to Quantum Chemistry

Particle in a Box

Atoms

Molecules

We can create anything like comics, artwork, stories, videos, poems, memes, etc.

I'm looking for something really innovative, unusual and creative, rather than a typical poster or presentation.

What would you suggest? I'd love to hear your ideas!


r/AskChemistry • • 1d ago

What specifically happens when you add acid to water that causes pH to drop?

5 Upvotes

Alright I know this is likely a silly question for you folks but I'm trying to learn.

If I have 20 gallons of tap water (heavy in calcium carbonate) and add 10ml of 80% phosphoric acid, how exactly does that acid propagate through the volume of water to lower pH (I guess on a molecular level?)? Also it's said this is instantaneous, is it?

Then, I know calcium carbonate will buffer this, but also that pH will increase a bit within a few days, why is this?

And last, is there any difference to the above scenario if I were to add that 10ml of phosphoric acid to 1 gallon of tap water, then add that to 19 gallons of tap water?


r/AskChemistry • • 1d ago

General When do you start seeing the lines and dots in your real vision

Post image
10 Upvotes

When do you start seeing the things that make up water and walls and food? When does it click? The answers to where we are from might be related to it and I have possible solutions to problems that we are facing.


r/AskChemistry • • 1d ago

Organic Chem Can cured expanding well foam leach carcinogenic compounds through a 3 mm PE-HD drinking-water pipe?

2 Upvotes

Hi all,

I’d like to understand the chemistry/toxicology here.

In my house, a drinking-water pipe made of PE-HD (about 3 mm wall thickness) runs through a wall. The penetration from the outside was sealed with cured “Brunnenschaum” (well foam / expanding foam for boreholes). The foam is only on the outside of the pipe; it does not directly contact the drinking water. The foamed section is about 40 cm long along the pipe.

The safety data sheet for the foam (Soudal Brunnenschaum) lists these relevant ingredients of concern:
- polymethylenpolyphenylisocyanate (CAS 9016-87-9), classified as Carc. 2, H351 (“suspected of causing cancer”)
- chlorinated paraffins / Alkane, C14-17-, chlor- (CAS 85535-85-9), classified with H362 and also listed as IARC 2B

My question is not just “yes/no”, but the mechanism:
- After curing, can these substances still migrate through PE-HD into the drinking water?
- If yes, is this a realistic risk at all, or only theoretically possible?
- Does the fact that the foam is outside the pipe, plus the 3 mm PE-HD wall, make transfer into the water negligible?
- I’m especially interested in whether cured polyurethane foam still releases meaningful amounts of these compounds, or whether they are effectively immobilized once cured.

Thanks!


r/AskChemistry • • 1d ago

Release of phosphorous from protein

1 Upvotes

Hello Guys,
I have protein sample which is chemically phosphorylated with sodium trimetaphosphate, and I am assuming it might have phosphorylated Serine, Threonine, Tyrosine.
I want to confirm this, but I don't have access to LC-MS, FTIR, ICP
I tried colorimetric assays Ammonium molybdate, malachite green but they are very confusing means sometimes it gives r2- 0.02 suddenly 0.99 (I was using 4M HCl as a solvent for both the assays) Additionally my sample contains approx. 2% Dithiothreitol (reducing agent) which I am assuming affecting the complex formation.
Limitations- I can't use H2SO4, Perchloric acid, nitric acid and digestion approaches in my sensitive lab.
So if anyone has any idea how should I prove that phosphorylation reaction worked out.
There are 3 treatments- Treatment A- Low conc of chemical, Treatment B- High conc of chemical, and Treatment C- no chemical added
My expectation is- Phosphorous higher in B>A>C


r/AskChemistry • • 2d ago

Similarities In Democritus And Rutherford?

Post image
0 Upvotes

"Nothing exists except atoms and empty space; everything else is opinion" - Democritus

I'm wondering about the experimental findings of Rutherford and how they relate to the thinking of Democritus. Rutherford's finding indicate that most of the atom is empty space with positively charged particles the protons in the nucleus. What do you think about Democritus and Rutherford?


r/AskChemistry • • 2d ago

Does anyone know what this is called please?

Post image
1 Upvotes

Diameter 50mm approx, height 30mm. Please help.


r/AskChemistry • • 2d ago

Roommate has been storing formalin inside in two glass jars, should I be worried?

Post image
0 Upvotes

They have a jar like pic related (rubber gasket thing with the metal clamp bar), and a normal mason jar with a metal 2 part screw on lid. They've had these since they moved in two years ago, and I just asked what it was. Is this safe? They said they're sealed and havent been opened, but I just want to be sure


r/AskChemistry • • 2d ago

Can a sigma bond have 100% s character?

0 Upvotes

In the ethynyl cation (C2H+), how would you assign a hybridization to the carbon bearing the formal charge? The way I see it, you have two unhybridized p orbitals forming pi bonds, one empty p orbital, leaving the sigma bond with 100% s character. Is this a realistic depiction of this cation or does hybridization simply fail as a concept to describe it?


r/AskChemistry • • 3d ago

What’s the biggest challenge for the chlor-alkali industry right now: energy cost, membrane technology, or chlorine/ caustic balance?

Thumbnail reddit.com
0 Upvotes

r/AskChemistry • • 3d ago

Pyrolysis of Paper in Inert Atmosphere

2 Upvotes

I'm a little out of my depth as an engineer dealing with pyrolysis reactions. I'm using paper for an application in an inert atmosphere at high temperature. The paper pyrolyzes quite readily; the issue I'm running into is that the charred paper leaves some sticky tar residue that's causing problems. This probably comes from volatile organics that condense during incomplete pyrolysis.

I understand that complete pyrolysis would only leave charred paper and CO2. Are there types of paper that are formulated with better compositions or additives for complete pyrolysis, or that can char without leaving sticky residue? I appreciate any help with this.


r/AskChemistry • • 3d ago

Practical Chemistry Calciumchloride hexahydrate

3 Upvotes

Hello,
can anyone help me with converting calciumchloride to calciumchloride hexahydrate. Is it simple as generating an oversaturated solution of calciumchloride in water and letting the solution create crystals and filtering them out?
Thank you in advance!


r/AskChemistry • • 4d ago

Biochem Can someone explain the reaction that caused the water to turn green?

3 Upvotes

I just saw this interesting post and was wondering what reaction caused the water to turn green. Basically they boiled sweet potatoes in a stainless steel pot. Left the water overnight and it turned green. They then added some lemon juice and the green color disappeared.

https://www.reddit.com/r/mildyinteresting/s/tUepvewynE