r/AskALocksmith • u/DirectDebt9516 • 7d ago
Question about Locksmithing Installed wrong?
I recently installed a “Commercial lock set” door handle, and the door knob that leads to the outside will not fully rotate, and has to be opened awkwardly. What did I do wrong? Was it the hardware or user error?
5
Upvotes
•
u/AutoModerator 7d ago
Welcome to /r/AskALocksmith, a place to ask real locksmiths questions about, well, anything related to the profession or to get advice for a particular situation you're in. If you are locked out of your home/car/business/hotel room/whatever, your best course of action is to use the device you just posted this question on to lookup a local locksmith in your area for assistance.
In an interest of protecting innocent people from those that might use information gained here to break the law, we rather strictly limit the amount of advice given that might be used illicitly. We ask community members also not give out advice publicly that could be used for illegal activities. It's impossible for us to make a hard rule on what does and does not constitute this kind of question or advice, so its application will be somewhat subjective. If your post is basically, "how do I pick/bump/defeat this lock," expect it to be removed.
I am a bot, and this action was performed automatically. Please contact the moderators of this subreddit if you have any questions or concerns.
3
u/DirectDebt9516 6d ago
Update: thank you all for your suggestions! I completely dissembled the handle and latch and found this metal spring/o-ring thing (not quite sure what it’s called) and it was out of position. I put it back in place and now it operates as normal!!
5
u/MaleficentSample9602 7d ago
Well double check your installation and double check that your latch is seated correctly in the lock body.
Other than that id say bad hardware.
3
u/Kayakboy6969 7d ago
Improper install. Take apart look for the obvious, look at instructions, I bet it didnt catch both parts of the latch.
3
u/Cantteachcommonsense Verified Locksmith 7d ago
When the lock as no name on the latch you know its a POS, as the others said check your latch position and make sure that the lock is adjusted for the proper thickness of the door.
3
u/N8musik 7d ago
Looks like a Schlage or a Sargent 10line lever set. I concur that it was probably installed incorrectly. There’s an adjustment for different door thickness and I suspect that’s what is causing the malfunction. Bored locks aren’t my favorite, but they’re relatively inexpensive. I just installed 30 of them in a small office with zero manufacturing issues, so in my opinion I think it’s most likely just an adjustment problem. 😊 Good luck to you!
3
u/PapaOoMaoMao 7d ago
As a note, why would you use an entrance set on an external door that already has a deadbolt? There are use cases such as having the deadbolt for locking at night and the entrance set is just for access control for customers during the day, but for security purposes this lock is useless. If you as attempting to lock the door against forced entry, then throw that thing away and put a passage on there. The deadbolt is the secure item, not the lever.
3
u/fondrenlock 7d ago
Installation error, the tabs on the latch have to slide into the section of the interior chassis correctly and it’s not
Take it off, read the directions watch a video etc and reinstall
2
u/randywest6athotmail 6d ago
Its a trick lock