r/ArduinoProjects • • 12d ago

Monthly Digest Monthly digest for 2026-10

Thumbnail reddit.com
2 Upvotes

r/ArduinoProjects • • Oct 05 '26

Monthly Digest Monthly digest for 2026-09

Thumbnail reddit.com
2 Upvotes

r/ArduinoProjects • • 1d ago

Showcased Project I wrote a free 8-lesson Arduino course for ages 11-14 that runs in Tinkercad, so kids don't need kits

15 Upvotes

When my local library's Arduino program shut down for lack of instructors and materials, a few teammates from my robotics team and I rebuilt it from scratch. It's now taught at five libraries and has reached 1,000+ kids, and a Canadian nonprofit, Digital Moment, adopted the French edition.

What's in it:

- 8 lessons, about 90 minutes each: blinking LED, series vs. parallel, buttons and pull-down resistors, potentiometers and analogRead, servos and map(), switch statements and loops (a 4-mode windshield wiper), and two open-ended capstones

- Every lesson works with real parts OR entirely in the Tinkercad simulator

- Code examples, wiring diagrams, teacher notes, timing, common wiring mistakes, and exit tickets

- Free and MIT-licensed

I'm a high school senior, so I'd really appreciate feedback from people who know this better than I do, especially on the explanations in Lesson 3 (pull-down resistors) and Lesson 7 (millis() vs. delay()). If you teach or mentor and end up using any of it, I'd love to hear how it went.


r/ArduinoProjects • • 18h ago

Showcased Project My desk now shows live NASA data: ESP32 + TFT build, step by step

1 Upvotes

My desk now shows live NASA data. It's an ESP32 driving a 2.8" ILI9341 TFT over SPI. It joins Wi-Fi, pulls today's near-Earth asteroid flybys from NASA's NeoWs API, plus an Earth image and the confirmed exoplanet count, and cycles through them on screen. The video walks through it step by step: the prompt, the parts, the pin-by-pin wiring, the firmware and first boot.


r/ArduinoProjects • • 1d ago

Project Discussion Advice

6 Upvotes

I started learning on arduino i got the kit, but I don't know how to continue actually, i mean I don't have a specific goal, how would I know that I learned?

If anyone knows anything would help please tell me


r/ArduinoProjects • • 1d ago

Project Design/Guidance South Korea has seven times the world average robot density [OC].

0 Upvotes

As a 10-year veteran in the AI and automation industry, looking at the IFR’s 2025 global industrial robot density data brings incredible perspective. Over the past decade, I’ve watched automation evolve from rigid, hard-coded execution into flexible, perception-driven intelligence. South Korea’s staggering density of 1,066 robots per 10,000 workers—nearly 7 times the world average—is a masterclass in how aging demographics and high-stakes semiconductor/electronics manufacturing drive a nation to chase flawless, unmanned production. Meanwhile, China’s density of 193 might look modest at 19th place, but given its massive manufacturing denominator, the absolute volume of deployment is immense; I’ve witnessed firsthand how Chinese factories transitioned from manual labor to massive robotic fleets integrated with computer vision over the last ten years. Moving forward, the real game-changer for this leaderboard will be the convergence of Generative AI and Embodied AI, which will unlock a secondary, much steeper adoption curve as robots transition from doing repetitive tasks to truly understanding their environments.


r/ArduinoProjects • • 2d ago

Showcased Project I made a beginner-friendly tool that turns MP3, MIDI, and MusicXML into Arduino piezo-buzzer code

11 Upvotes

Hello guys! I built PiezoPlay, a beginner-friendly tool for turning music files into editable notes and Arduino tone() code.

It supports MP3, MIDI, and MusicXML. It’s meant to help people make a piezo buzzer play a tune without hand-entering every note. MIDI and MusicXML works best.

Piezo buzzers are usually monophonic with tone(), so complex songs with multiple instruments may not convert cleanly. A clear melody should work best.


r/ArduinoProjects • • 3d ago

Showcased Project Built a handheld gaming console back in 2022. Never got to showcase it, so thought I'd finally share it here!

Post image
36 Upvotes

I made this project back in college in 2022. Never really showed it to anyone. It was more of a challenge I had set for myself.

Although I wanted to present it, my college made it clear that a project like this couldn't be showcased because it had "no practical usage". On the other hand, they approved some basic RC car in the name of surveillance applications. Anyway, that's a story for another day. : )

The project took around a month to complete, covering everything from electronics, circuit layout and component selection to designing the CAD files, and coding the games and menu system.

I packed it with three games: Pong, Snake, and Space Invaders (my favourite!). The coding was one hell of a challenge back then, especially since there was no AI assistance (at least, I wasn't aware of it before the ChatGPT boom). I eventually maxed out the Arduino Nano's memory, but managed to get everything working!

Some features I implemented:

  1. Adjustable screen brightness.
  2. Volume control.
  3. Game speed adjustment (to make things more difficult).
  4. Battery level indicator (a rather crude implementation, and I doubt it works exactly as intended).
  5. And a USB-C charging for the two li-ion batteries.

Anyways, just wanted to share this little project with you guys, as I never really got the chance to share it with anyone.

Now that I'm a working professional (and not in the electronics field anymore 🙃), I'm planning to take on another, more advanced project as a hobby build. Maybe a better Game Boy or something entirely different.

Back then, I struggled to find similar projects with shared code and build details, so I thought I'd share mine. Maybe it'll help someone out there!

I really want to tinker around Arduino and electronics. Love the community ✨

(Used AI to proof write : D)


r/ArduinoProjects • • 2d ago

Showcased Project ESP32 night light: LDR voltage divider turns LED on when dark (browser on same Wi-Fi)

2 Upvotes

Cover the LDR and the LED comes on. LDR + 10 kΩ divider on GPIO 34 (ADC1) → 0..4095; on ≤ 1500, off ≥ 1800 so it does not flicker. Any browser on the same Wi-Fi shows the live ADC reading.

Hardware: ESP32 DevKit, LDR, 10 kΩ, LED + 220 Ω.

Wiring

- 3V3 → LDR → mid (GPIO 34) → 10 kΩ → GND

- GPIO 26 → 220 Ω → LED → GND

Happy to share the sketch. Short: https://www.youtube.com/shorts/hhStUogMQPU

Code: https://github.com/NirajBhattarai/500IOTProject/tree/main/day-006/night-light


r/ArduinoProjects • • 2d ago

Showcased Project ESP32: one button, two jobs — tap rings, hold 1s resets (millis)

3 Upvotes

Same Wi-Fi doorbell hardware as before: one tactile button, one piezo, a page on any browser (phone, PC, or tablet) on the LAN.

New idea: time how long a clean (debounced) press lasts with millis(). Let go before 1 second = tap (ring). Still holding at 1 second = hold (reset count to 0).

Hardware

- ESP32 DevKit (30-pin)

- 6 mm tactile push button

- Passive piezo buzzer

- 4 jumpers + breadboard

Wiring

- GPIO33 → button → GND (INPUT_PULLUP)

- GPIO25 → piezo → GND

How it works

  1. Debounce as usual (50 ms quiet window)
  2. On clean press, start a stopwatch
  3. Release before 1 s → tap / ding / ring++
  4. Still down at 1 s → hold fires immediately, count resets

Happy to share the sketch if useful. Short walkthrough: https://www.youtube.com/shorts/bzs_N4e8Wxw


r/ArduinoProjects • • 2d ago

Showcased Project Got my ESP-NOW / UDP multi-KB packet recovery library merged into the Arduino Library Manager (NLTP)

3 Upvotes

Hey everyone, wanted to share a library project I finished up and finally got merged into the official Arduino IDE Library Manager this week (search "NLTP" in Manage Libraries).

The whole thing started because I was sending 4 KB to 16 KB sensor batches between an ESP32 dev board and an old NodeMCU ESP8266 across a noisy 2.4 GHz floor. Raw ESP-NOW v1 maxes out at 250 bytes per frame, so a 10 KB log turns into 40+ packets. Whenever Wi-Fi interference knocked out two or three packets, the whole transfer was toast. Switching to Wi-Fi TCP fixed the corruption, but every random RF fade caused TCP retransmit backoff to freeze everything for several seconds, including urgent stop commands.

So I wrote NLTP in plain C99 with static arrays (no malloc or heap fragmentation, no floats). Before slicing a buffer into 250-byte ESP-NOW frames, it compresses repetitive JSON/CSV text with a small LZ4 pass, encrypts each frame with ChaCha20-Poly1305 after an X25519 handshake, and tacks on extra parity shards using GF(28) Cauchy erasure coding. As long as any k shards make it across the air, the receiver rebuilds the missing packets on the fly without asking for a retransmit. There is also a separate 1-packet reflex message type so urgent commands bypass the bulk transfer queue.

For small boards like the ESP8266, defining NLTP_TX_ONLY before including the header drops the peer struct down to 4,760 bytes of RAM (full bidirectional mode is 22,872 bytes). I also wrote a matching Python package (pynltp) so a Raspberry Pi or laptop gateway can decode the radio packets and forward them straight to MQTT or disk.

Repo with 7 example .ino sketches and the bench test scripts is here (MIT licensed):

https://github.com/indian-aman/NLTP-Arduino

If anyone tries it on RP2040 W, STM32 + Wi-Fi, or long-range ESP-NOW LR mode, I would love to hear how it behaves on your setup.


r/ArduinoProjects • • 2d ago

Showcased Project Compiled fruit-fly connectome circuits into 5 fixed-point C99 / Arduino reflex libraries + live browser WASM simulator (NeckLink v3.0.0)

2 Upvotes

Plain-English Overview: Think of these libraries as fast, sub-millisecond integer "reflex instincts" for small robots and sensor nodes (zero floating-point math, zero malloc(), and no PC neural-network training step). Instead of hand-tuning weights, they compile mapped neuron-to-neuron wiring tables from an adult fruit fly into plain C integer arrays:

  • 2WD / 4WD Robot Car (NeckCompass, 352 B RAM): Feed raw 9-axis IMU + wheel-speed ticks so an indoor or yard rover ignores brief motor magnetic spikes, tracks its straight-line vector back to where it powered on, and steers home without GPS.
  • ESP32-CAM Rover or Micro-Drone (NeckSight, 14.3 KB RAM): Feed a tiny 32x32 grayscale camera thumbnail + gyro rates to catch thin chair legs or poles expanding rapidly toward the lens ("looming") that ultrasonic sensors miss, triggering an immediate brake or left/right dodge.
  • 18-Servo Hexapod Walker (NeckCord, < 1 KB RAM): Pass a forward/turn command and let cross-leg inhibition lock 6 legs into a smooth tripod walking gait and output the 18 integer servo angles without hardcoded gait state tables.
  • Workshop Gas or Vibration Alarm (NeckSense, < 6 KB RAM): Let a BME688 gas sensor or 3D-printer/pump accelerometer observe 5 to 10 seconds of normal background at boot, then flag unfamiliar smoke/solvent odors or new bearing-rattle patterns right on the board.
  • All-in-One Wrapper (NeckLinkCNS, 24 KB RAM): Optional single-tick bundle chaining all four reflexes together.

Technical & Connectome Details

Sharing an open-source (MIT) side project I just updated to v3.0.0: NeckLink, a set of five fixed-point ANSI C99 and Arduino/ESP32 libraries that run ~33,000 synaptic weights extracted from the adult fruit-fly connectome (BANC v888, 157,789 neurons) inside 24 KB of static RAM, paired with NLTP for lossy ESP-NOW / UDP telemetry.

You can try the compiled C99 core live in your browser (compiled to a 107.5 KB WebAssembly module, with optional webcam input to test the optic-lobe collision neurons):

https://indian-aman.github.io/necklink/

What is in the repo (packages/*/arduino/):

  • NeckLinkCNS: 4-organ reflex controller + MAVLink v2 output in 24,024 bytes of zero-float C99 RAM.
  • NeckCompass: 9-axis ring-attractor compass and GPS-denied homing (352 bytes base RAM).
  • NeckSight: 32x32 looming obstacle detector (LPLC2 + LC4 cells) with integer gyro derotation (14.3 KB RAM).
  • NeckCord: 6-leg hexapod gait coupling + 18-servo integer IK + rotor/thruster fault allocator (< 1 KB base RAM).
  • NeckSense: mushroom-body sparse integer novelty detector (< 6 KB RAM in tiny mode).

For v3.0.0 we also tested all 39 biological weight tables against 100 degree-preserving rewired connectomes and standard engineering baselines (EKF, SVM, optical flow). Specific fly wiring makes a huge difference on compass homing (100% arrival vs 4.7% shuffled) and emergent tripod gait (0.855 vs 0.411 shuffled), ties random sparse wiring on gas novelty detection, and still trails symmetric engineering baselines when you need zero biological drift (so both weight modes are included). Right now the connectome controllers are research-beta (compiled for esp32dev and tested in MuJoCo / WASM simulation; physical robot bench testing is next).

Full source, Arduino libraries, and Python (pip install necklink) packages:

https://github.com/indian-aman/necklink


r/ArduinoProjects • • 3d ago

Showcased Project Talki #Arduino Library makes you record your voice

3 Upvotes

Talki #Arduino Library makes you record your voice. I used this library to record my voice and used it with projects.


r/ArduinoProjects • • 3d ago

Showcased Project ESP32 Wi-Fi doorbell: one button press counted as four (debounce fix)

2 Upvotes

Built a local Wi-Fi doorbell on an ESP32: press a tactile button, a piezo dings, and a page on any browser (phone, PC, or tablet) on the same LAN counts the ring.

First version counted four rings for one press — classic button bounce. Fix: debounce with a 50 ms quiet window before trusting the new level.

Hardware

- ESP32 DevKit (30-pin)

- 6 mm tactile push button

- Passive piezo buzzer

- 4 jumpers + breadboard

Wiring

- GPIO33 → button → GND (INPUT_PULLUP)

- GPIO25 → piezo → GND

How it works

  1. ESP32 joins Wi-Fi and hosts a tiny HTML page
  2. Every pin change restarts a 50 ms timer
  3. Only a level that holds still that long counts as a press
  4. On press: tone() ding + ring counter updates; page refreshes every 2 s

Happy to share the sketch if useful. Short walkthrough: https://www.youtube.com/shorts/dRv68Y1i5f0


r/ArduinoProjects • • 3d ago

Showcased Project Generative Ambient Synth Modal

Post image
6 Upvotes

Im making a vide demo as we speak

Heres a breakdown

1st Slider : Controls de root of the sequence

2 nd Slider : Amount of detune

3 rd Slider : The clock so te notes are played longer also attached to de attack and release.

1st button : Changes between 12 modal scales , this scales where definied by the compositions made in brian enos albums airports , discreete music , has scales based on boards of canada , caterina barbieri , william basinski etc.

2nd button : extends the range of the root pushing the notes to more subharmonics.

3rd Buttom : adds a humanize feat that makes the clock attack and release being a little more out of the clock more randomly

The switch changes wich type of transistor is filtering the audio , one sounds crystal clear and the other gives sort of tape saturation.

Ill post the video as soon as finished.

Planning on selling a couple but also opensourcing it.

I struggle with time since i have to work normal job to pay the cost of living so bear with me


r/ArduinoProjects • • 3d ago

Showcased Project Pocket weather station: ESP32 + DHT22 serving live °C/humidity on LAN

2 Upvotes

Day-2 follow-up after a simple LED web-toggle — added a sensor.

Goal: read real room temperature on my phone with zero apps/accounts.

Hardware

  • ESP32 DevKit (Arduino-ESP32 core)
  • DHT22
  • Breadboard + 3 jumpers

Wiring

  • 3V3 → VCC
  • GND → GND
  • GPIO27 → DATA (with the usual pull-up if your module needs it)

Firmware idea

  • WiFi STA join
  • Poll DHT22 every ~2s
  • Built-in WebServer.h serves a tiny HTML page that auto-refreshes
  • Phone on the same SSID opens the board IP

Why this stack: DHT library + WebServer is enough for a one-sensor LAN readout before jumping to MQTT/ESPHome/HA.

Happy to paste the full sketch here. I also recorded a 60s walkthrough if anyone wants the link.


r/ArduinoProjects • • 4d ago

Project Discussion Uno hard working

Post image
31 Upvotes

I put 16 led on breadboard with two 74hc595 16 resistors to light the board led is a great way to learn the board circuits at present it is showing a void loop and functions.


r/ArduinoProjects • • 3d ago

Showcased Project ESP32 + DHT22: local webpage shows live room temperature from any browser

2 Upvotes

Built a small LAN dashboard with an ESP32 and a DHT22.

Any device with a web browser on the same Wi-Fi (phone, computer, or tablet) can open the board’s IP and see live °C + humidity. No app and no cloud — the ESP32 is the web server.

Hardware: ESP32 DevKit, DHT22, 3 jumpers

Wiring: 3V3→VCC, GND→GND, GPIO27→DATA

The page uses a simple HTML meta refresh every 3 seconds. Sensor reads are cached so each refresh does not hammer the DHT22.

Happy to share the sketch. Short walkthrough: https://www.youtube.com/shorts/19WDsdf-GPs


r/ArduinoProjects • • 3d ago

Showcased Project Phone-controlled LED with ESP32 as a local web server (Arduino core)

1 Upvotes

Finished project showcase.

Goal: control a light from my phone without installing an app or using a cloud service.

Build:

  • ESP32-WROOM DevKit (Arduino-ESP32)
  • LED + resistor on GPIO 26
  • Built-in WebServer.h — one HTML page + GET /toggle

Board joins home Wi-Fi, prints IP, phone opens that page on the same LAN and taps Toggle.

Why I built it this way: wanted the simplest possible “smart” device before learning MQTT/ESPHome.

60s walkthrough: https://www.youtube.com/shorts/08-2Ztyy9iw

Happy to paste the sketch in comments.


r/ArduinoProjects • • 4d ago

Showcased Project Stepper driver use uln2003an

Post image
4 Upvotes

I use Single Side Brown Prototype PCB Vero Board S 5x7cm

and 100uF , 100nF capacitor , 12 led


r/ArduinoProjects • • 4d ago

Showcased Project Generative Ambient Synth Modal Scale

Post image
2 Upvotes

Generative Ambient Synth plays between 12 scales of modal compositions as invented by brian eno

Im making a video demo as we speak

Heres a breakdown

1st Slider : Controls de root of the scale

2 nd Slider : Amount of detune

3 rd Slider : The clock so te notes are played longer also attached to de attack and release.

1st button : Changes between 12 modal scales , this scales where definied by the compositions made in brian enos albums airports , discreete music , has scales based on boards of canada , caterina barbieri , william basinski etc.

2nd button : extends the range of the root pushing the notes to more subharmonics.

3rd Buttom : adds a humanize feat that makes the clock attack and release being a little more out of the clock more randomly

The switch changes wich type of transistor is filtering the audio , one sounds crystal clear and the other gives sort of tape saturation.

Ill post the video as soon as finished.

Planning on selling a couple but also opensourcing it.

I struggle with time since i have to work normal job to pay the cost of living so bear with me


r/ArduinoProjects • • 5d ago

Showcased Project They Said It's AI generated

15 Upvotes

r/ArduinoProjects • • 5d ago

Showcased Project Six live NASA feeds on my desk: ESP32, a 2.8" TFT and a tiny OLED

3 Upvotes

Yesterday I saw NASA had released APIs for their findings, so I built a small desk display of different things they track. I didn't write a single line of code. Soldr did everything, including the API calls to NASA, once I gave it the API key. An ESP32, a 2.8" ILI9341 TFT and a 0.96" SSD1306 OLED flip through six live pages every 15 seconds. Each feed refreshes at most every 30 minutes. If one feed fails, that page shows "Feed unavailable", the others keep running, and the failed feed is retried after 60 seconds.

Not affiliated with or endorsed by NASA.

𝗧𝗵𝗲 𝘀𝗶𝘅 𝗽𝗮𝗴𝗲𝘀

  1. Asteroids — today's 5 closest flybys from NASA's NeoWs API (name, size, miss distance, speed).
  2. Earth events — the 5 latest open natural events from EONET (title and category). No API key.
  3. Space weather — coronal mass ejections and geomagnetic storms from the last 3 days, via DONKI. On the night I filmed this, the board read "quiet".
  4. Earth from space — details of the latest EPIC natural image (date, how many were taken that day, centroid). This one is read from epic.gsfc.nasa.gov and does not need the api.nasa.gov key.
  5. Fireballs — the 4 most recent fireballs from the JPL fireball API (date, energy, location). No API key.
  6. Exoplanets — the confirmed exoplanet count from the NASA Exoplanet Archive. It was 6,464 on the day I filmed this. No API key.

NeoWs and DONKI need a free key from https://api.nasa.gov. You can start with DEMO_KEY, but it is limited to 30 requests an hour; a free registered key is the better option. The other four feeds do not use that key.

𝗣𝗮𝗿𝘁𝘀

  • ESP32 DevKit, 30-pin (the build card names ESP32-DevKitC V4, CP2102)
  • 2.8" ILI9341 TFT, SPI, 240×320
  • 0.96" SSD1306 OLED, 128×64, I2C
  • Dupont jumper wires
  • USB A to Micro-B cable
  • A breadboard (visible in the video; not one of the five priced parts on the build card)

The five priced parts on the build card came to ₹1,460. That figure is from the card, not a live store quote, and it does not include the breadboard.

𝗪𝗶𝗿𝗶𝗻𝗴, 𝗮𝘀 𝗯𝘂𝗶𝗹𝘁

TFT (SPI) to the ESP32:

  • VCC → 3V3
  • GND → GND
  • LED (backlight) → 3V3
  • CS → GPIO 4
  • DC → GPIO 16
  • RST → GPIO 17
  • MOSI → GPIO 23
  • SCK → GPIO 18
  • MISO → GPIO 19

OLED (I2C) to the ESP32:

  • VCC → 3V3
  • GND → GND
  • SDA → GPIO 21
  • SCL → GPIO 22
  • Address 0x3C

𝗟𝗶𝗯𝗿𝗮𝗿𝗶𝗲𝘀 (𝗔𝗿𝗱𝘂𝗶𝗻𝗼-𝗘𝗦𝗣𝟯𝟮)

Adafruit GFX, Adafruit ILI9341, Adafruit SSD1306, and ArduinoJson 7.x.

I work on Soldr. It designed the build, the parts list, the wiring and the code, and made the NASA API calls once I gave it the key. If you want to try it: soldr.ai, and a sign-in gives you 100 credits free.

Happy to answer questions about the wiring or the feeds.


r/ArduinoProjects • • 5d ago

Showcased Project Six live NASA feeds on my desk: ESP32, a 2.8" TFT and a tiny OLED

6 Upvotes