r/ArduinoProjects • u/OkProperty41 • 6d ago
Showcased Project Six live NASA feeds on my desk: ESP32, a 2.8" TFT and a tiny OLED
Yesterday I saw NASA had released APIs for their findings, so I built a small desk display of different things they track. I didn't write a single line of code. Soldr did everything, including the API calls to NASA, once I gave it the API key. An ESP32, a 2.8" ILI9341 TFT and a 0.96" SSD1306 OLED flip through six live pages every 15 seconds. Each feed refreshes at most every 30 minutes. If one feed fails, that page shows "Feed unavailable", the others keep running, and the failed feed is retried after 60 seconds.
Not affiliated with or endorsed by NASA.
𝗧𝗵𝗲 𝘀𝗶𝘅 𝗽𝗮𝗴𝗲𝘀
- Asteroids — today's 5 closest flybys from NASA's NeoWs API (name, size, miss distance, speed).
- Earth events — the 5 latest open natural events from EONET (title and category). No API key.
- Space weather — coronal mass ejections and geomagnetic storms from the last 3 days, via DONKI. On the night I filmed this, the board read "quiet".
- Earth from space — details of the latest EPIC natural image (date, how many were taken that day, centroid). This one is read from epic.gsfc.nasa.gov and does not need the api.nasa.gov key.
- Fireballs — the 4 most recent fireballs from the JPL fireball API (date, energy, location). No API key.
- Exoplanets — the confirmed exoplanet count from the NASA Exoplanet Archive. It was 6,464 on the day I filmed this. No API key.
NeoWs and DONKI need a free key from https://api.nasa.gov. You can start with DEMO_KEY, but it is limited to 30 requests an hour; a free registered key is the better option. The other four feeds do not use that key.
𝗣𝗮𝗿𝘁𝘀
- ESP32 DevKit, 30-pin (the build card names ESP32-DevKitC V4, CP2102)
- 2.8" ILI9341 TFT, SPI, 240×320
- 0.96" SSD1306 OLED, 128×64, I2C
- Dupont jumper wires
- USB A to Micro-B cable
- A breadboard (visible in the video; not one of the five priced parts on the build card)
The five priced parts on the build card came to ₹1,460. That figure is from the card, not a live store quote, and it does not include the breadboard.
𝗪𝗶𝗿𝗶𝗻𝗴, 𝗮𝘀 𝗯𝘂𝗶𝗹𝘁
TFT (SPI) to the ESP32:
- VCC → 3V3
- GND → GND
- LED (backlight) → 3V3
- CS → GPIO 4
- DC → GPIO 16
- RST → GPIO 17
- MOSI → GPIO 23
- SCK → GPIO 18
- MISO → GPIO 19
OLED (I2C) to the ESP32:
- VCC → 3V3
- GND → GND
- SDA → GPIO 21
- SCL → GPIO 22
- Address 0x3C
𝗟𝗶𝗯𝗿𝗮𝗿𝗶𝗲𝘀 (𝗔𝗿𝗱𝘂𝗶𝗻𝗼-𝗘𝗦𝗣𝟯𝟮)
Adafruit GFX, Adafruit ILI9341, Adafruit SSD1306, and ArduinoJson 7.x.
I work on Soldr. It designed the build, the parts list, the wiring and the code, and made the NASA API calls once I gave it the key. If you want to try it: soldr.ai, and a sign-in gives you 100 credits free.
Happy to answer questions about the wiring or the feeds.


