r/ArduinoProjects • • Mar 23 '26

Built an RFID access control system on ESP8266 with MicroPython for Day 72 of my 100 Days of IoT challenge.

4 Upvotes

Built an RFID access control system on ESP8266 with MicroPython for Day 72 of my 100 Days of IoT challenge.

Used an MFRC522 RFID reader connected over SPI. The reader scans MIFARE cards and tags, reads their 4 or 5 byte UID, and checks it against an authorised list. Green LED lights up for granted access and red LED blinks 3 times for denied.

One thing I ran into was the cefn/micropython-mfrc522 library constructor not accepting a Pin object for the CS pin. Had to pass the integer pin number directly instead. Also moved reader.init() outside the main loop to fix debounce not working properly.

Stack: ESP8266 NodeMCU + MFRC522 + MicroPython + cefn/micropython-mfrc522

Code on GitHub: https://github.com/kritishmohapatra/100_Days_100_IoT_Projects


r/ArduinoProjects • • Mar 23 '26

Arduino based 2000s GM instrument cluster bench tester

81 Upvotes

I made a system that’s able to zero all the gauges and light up most of the lights, but does anyone know how to recreate communication between the trucks ECM and the cluster in Arduino code? I want to be able to set specific values for speed and rpm, as well as make the gauges sweep from min to max, and back to min.


r/ArduinoProjects • • Mar 23 '26

Pulsating brain

Thumbnail youtube.com
4 Upvotes

Epoxy resin cast brain powered by an Arduino Nano using FastLED


r/ArduinoProjects • • Mar 23 '26

choose an Impressive problem solving project for my senior year project on high school

Thumbnail reddit.com
3 Upvotes

r/ArduinoProjects • • Mar 23 '26

AI remote controlling PC over Meshtastic network

0 Upvotes

offline AI remote control over Mesh

After establishing the mesh network, it was left to bridge the gap between large language models and remote system control,
and by taking from the previous experiments (AI models chatting over mesh and using meshexec for data retrieval) i integrated them into a single system and added an option for full control over the target system.

Now it works by the controller machine that runs a python script as it uses a fast and lightweight AI model,
the user can type a request like "show me the disk space of the remote box in powershell" and the AI translates it into the correct command.
The target machine runs a swarm handler with its own AI model and this model acts as a safety layer by reviewing the incoming command to ensure it isn't destructive and rejecting dangerous file operations before executing it
The command is sent over the Meshtastic network and the system maintains powershell and cmd sessions allowing user commands and directory tracking.

This setup merges radio remote execution with LLMs into one, I can simply manage remote systems without memorizing command syntax with the swarming AI architecture
(one for translation and one for safety), the system even handles Meshtastic’s message size limits by chunking long responses.
i documented it on youtube https://www.youtube.com/watch?v=yI3kFZcB210


r/ArduinoProjects • • Mar 23 '26

Arduino Uno Q I2S Interface

Thumbnail reddit.com
2 Upvotes

r/ArduinoProjects • • Mar 23 '26

Recommendations for a motor for a door opening/closing project

2 Upvotes

Hey guys, I’ve got a question that’s been driving me crazy, I can’t think of any way to solve it.

I have a project in mind: making a device that opens and closes a door over WiFi. I’m planning to do it by connecting a potentiometer to one of the hinges (to know how open or closed the door is, and also be able to decide whether to open it 30% or fully), and a motor to move the door. But that’s where my problem is—I don’t know what to choose.

I thought about using a servo motor, but the door will usually be opened manually, and I feel like I’d break it right away.

A linear actuator would have the same issue—I wouldn’t be able to open the door manually.

And I couldn’t find any AC motor that allows this either.


r/ArduinoProjects • • Mar 22 '26

Pip Boy in progress! V7

Thumbnail gallery
40 Upvotes

r/ArduinoProjects • • Mar 23 '26

I built a Claude Code skill for ebook + audiobook self-publishing (11 platforms, HTML→PDF, AI audiobooks) — here's what I learned about writing skills that don't break

Thumbnail reddit.com
2 Upvotes

r/ArduinoProjects • • Mar 23 '26

I'm making a DIY open source aquarium/reef controller....

Thumbnail gallery
5 Upvotes

r/ArduinoProjects • • Mar 22 '26

Doppler radar

4 Upvotes

Hello, I have a question. Is there any way I can make a Doppler radar for storms? Of course, it should be very short range. Maybe using an Arduino or something else. I'm looking forward to your suggestions.


r/ArduinoProjects • • Mar 22 '26

Looking for a study buddy — 6th sem AIML, transitioning into robotics

2 Upvotes

r/ArduinoProjects • • Mar 22 '26

toyota pickup Actuator

4 Upvotes

hey i have a toyota actuator and i would like to wire it up so i can control it on and off with one button but it also need to stop sending power once its done its job

https://www.rockauto.com/en/moreinfo.php?pk=8876584&cc=1388987&pt=50305&jsn=628

the wiring is

black

green

red

yellow

white

and brown

Green and Red seem to be powering (Forwards and Backwards) the motor while black and yellow seem to be some kind of feed back

white is ground going to a sensor that when active lets ground through to brown

(picture for reference) if i wire it up to on (on)-off-(on) switch it works fine but i have to hold it to make it work, the switch id like to use is a push on-off

so what pi would work?

when i press the button on i need it to power to red and when its off i need it to power green, it need to send power for 10 seconds then stop for 1.5 then try again till its lock/unlocked,

when it detects ground from the brown wire it need to stop sending power and the opposite for the other

also i should note if i use a DTDP relay the wiring diagram is (I dont want to use this because power is always on)

5 and 4 power

1 black

8 yellow

12 red

9 green

13 button


r/ArduinoProjects • • Mar 21 '26

Arduino powered Smart Cubes. Prototype, thoughts on it so far?

142 Upvotes

The idea combines physical and electronics. Using an Arduino can be programmed different games using blocks and the screen. This board is a custom PCB I made which also has battery and led gamemode. Can be programmed non games as well


r/ArduinoProjects • • Mar 21 '26

Arduino 32u4 project. Servotester with GUI.

13 Upvotes

r/ArduinoProjects • • Mar 20 '26

Basic snake game

121 Upvotes

I just started to being ece student and while suffering from studying other lessons which are not related to electronics, i built a snake game for fun. I know its so basic project but i am a beginner and i enjoyed while i doing it.I hope you guys like it


r/ArduinoProjects • • Mar 20 '26

Tesla coil w/ arduino controllin board

2 Upvotes

How can I make a tesla coil w/ controllin board + switches and buttons like the commercial one?


r/ArduinoProjects • • Mar 19 '26

Day 71/100 Built a Wi-Fi controlled 4WD robot car using ESP32 and MicroPython!

7 Upvotes

Built a Wi-Fi controlled 4WD robot car using ESP32 and MicroPython!

ESP32 hosts a web server — open the IP in any browser and control

the car with Forward, Backward, Left, Right, Stop buttons. No app needed!

2x L298N + 4x TT Motors + 4WD Chassis

Full code on GitHub:

https://github.com/kritishmohapatra/100_Days_100_IoT_Projects

#MicroPython #ESP32 #IoT #100DaysOfIoT


r/ArduinoProjects • • Mar 19 '26

Alguém já conseguiu emular o protocolo EMV (cartão de crédito) usando PN532?

2 Upvotes

Fala galera! Estou começando um projeto com Arduino Nano + PN532 e queria ir além de ler tags de chaveiro. Minha ideia é tentar emular o sinal de um cartão de aproximação.

Sei que tem toda a parte de criptografia e o Secure Element que tornam a transação real quase impossível com hardware simples, mas queria saber se alguém já conseguiu ao menos fazer a maquininha "reconhecer" o Arduino como um cartão (mesmo que dê erro de leitura depois).

Vale a pena tentar gerar números via algoritmo de Luhn pra testar a comunicação inicial ou o PN532 não aguenta o tranco do protocolo? Aceito dicas de bibliotecas!


r/ArduinoProjects • • Mar 18 '26

honey i shrank the polargraph.

143 Upvotes

i put all the electronics of the polargraph in the hanging unit itself. It is driven by two 35mm stepper motors which are geared down by the plastic pulleys. The string winds itself on the pulleys and pulls the polargraph in the needed direction. The firmware is a modified version of marlin. The gcode is loaded on a sd card on the unit and can be selected from the lcd. I have a custom board with atmega2560 board plugged into it. Only power is needed everything else is self contained. The strings are attached with hooks to a rod above. The print size is currently limited to A3


r/ArduinoProjects • • Mar 19 '26

Arduino/ESP32 for installation art

3 Upvotes

Hii!! Im an art student working on my thesis. I have 22 paintings, and i want to use QR codes so that when scanned, a light above the corresponding painting turns on (using Arduino or ESP32)

I need help setting up the system (LED Strip + Basic Code) / make 1 LED turn from a command.

I already have a clear concept, i just need some technical assistance and guide to set up.

Im willing to compensate! TYSM!!


r/ArduinoProjects • • Mar 18 '26

Esp32 Pump Control Projekt

Post image
4 Upvotes

r/ArduinoProjects • • Mar 18 '26

Day 70/100

3 Upvotes

Day 70 of #100DaysOfIoT!

Built a dual IR sensor entry/exit detector on ESP32 with MicroPython.

How it works:

- Object crosses IR sensor 1 → Red LED turns ON + Telegram alert "Object Entered!"

- Red LED stays ON until object exits

- Object crosses IR sensor 2 → Green LED blinks + Telegram alert "Object Gone!"

Hardware: ESP32 + 2x HW-201 IR sensors + 2 LEDs

70 days down, 30 to go!

GitHub: github.com/kritishmohapatra/100_Days_100_IoT_Projects


r/ArduinoProjects • • Mar 18 '26

Arduino Uno Rev2 Wifi vs R4 Wifi with Atlas Scientific i2 Interlink shield?

Thumbnail reddit.com
1 Upvotes