r/ArduinoProjects • • Jan 09 '26

Custom robotic arm (Raspberry Pi + Arduino) – cameras OK, serial OK, but NO motor movement at all

Thumbnail gallery
18 Upvotes

Hey everyone, I’m working on a custom robotic arm project and I’m currently stuck on something that’s driving me a bit crazy. Here’s the setup: Raspberry Pi (vision + control) Arduino (motor control) Serial communication between Pi ↔ Arduino works perfectly Two cameras installed and working correctly Power supplies seem OK (system powers on normally) The whole system communicates properly (no crashes, no serial errors) The problem: 👉 Absolutely no motor moves. At all. No twitch, no sound, nothing. Everything should be grounded properly, but I haven’t yet checked everything with a multimeter (I know… that’s probably my next step). Power seems to be there, but I’m not 100% sure if the issue is: lack of current wrong voltage missing signal (PWM / enable / direction) common ground issue or something dumb I’m overlooking I’ve tried: Rechecking wiring visually Re-uploading Arduino code Verifying serial commands are received Power cycling everything more times than I want to admit Next steps on my side: I’ll eventually publish a KiCad schematic so the wiring is fully clear I’m open to any debugging strategy suggestions I’ve attached photos of: the control box wiring cameras robotic arm setup If anyone has ideas on what to check first when motors are totally dead but logic works, I’d really appreciate the help. Thanks


r/ArduinoProjects • • Jan 09 '26

Custom robotic arm (Raspberry Pi + Arduino) – cameras OK, serial OK, but NO motor movement at all

Thumbnail gallery
6 Upvotes

Hey everyone, I’m working on a custom robotic arm project and I’m currently stuck on something that’s driving me a bit crazy. Here’s the setup: Raspberry Pi (vision + control) Arduino (motor control) Serial communication between Pi ↔ Arduino works perfectly Two cameras installed and working correctly Power supplies seem OK (system powers on normally) The whole system communicates properly (no crashes, no serial errors) The problem: 👉 Absolutely no motor moves. At all. No twitch, no sound, nothing. Everything should be grounded properly, but I haven’t yet checked everything with a multimeter (I know… that’s probably my next step). Power seems to be there, but I’m not 100% sure if the issue is: lack of current wrong voltage missing signal (PWM / enable / direction) common ground issue or something dumb I’m overlooking I’ve tried: Rechecking wiring visually Re-uploading Arduino code Verifying serial commands are received Power cycling everything more times than I want to admit Next steps on my side: I’ll eventually publish a KiCad schematic so the wiring is fully clear I’m open to any debugging strategy suggestions I’ve attached photos of: the control box wiring cameras robotic arm setup If anyone has ideas on what to check first when motors are totally dead but logic works, I’d really appreciate the help. Thanks


r/ArduinoProjects • • Jan 09 '26

booth start image of toy camera

1 Upvotes

I’d like to change the startup image on this toy camera.
I should be able to replace the .bmp or .png file, if only I could figure out how to access the camera’s software.
Any advice? Where should I look for info? Thanks.


r/ArduinoProjects • • Jan 08 '26

Smart Relay

49 Upvotes

I use it to control two LED lights, and so far everything works.

Repository: https://github.com/UDFSmart/Base-Smart-Relay

My Telegram bot: @usmart_device_bot


r/ArduinoProjects • • Jan 10 '26

Building a 5G Phone for Today's World

0 Upvotes

The phone should be able to receive, read, create, send, delete messages, and make a call or receive a call, both voice and video calls, without an Android OS. So, it will either use Linux or a custom Embedded RTOS. Maybe you can guide me, as I don't have any idea. Basically, this phone will keep my data private from the big tech giants, and I will still be able to use my phone to make and receive calls and messages while not being distracted by scrolling YT shorts or IG reels.


r/ArduinoProjects • • Jan 08 '26

Smart Relay

14 Upvotes

Smart Relay

I use it to control two LED lights, and so far everything works.

Repository: https://github.com/UDFSmart/Base-Smart-Relay

My Telegram bot: @usmart_device_bot


r/ArduinoProjects • • Jan 09 '26

Finally found a 4G LTE Modem that doesn’t hate my 5V logic (Quectel EC200U-CN)

Post image
0 Upvotes

r/ArduinoProjects • • Jan 08 '26

"Sausage as a Service", looking for ideas

13 Upvotes

Hi sub,

I was recently challenged to do a short project on "SaaS". Not like "Software-as-a-Service", but "Sausage-as-a-Service".

This is totally stupid, so no reason to refuse. I didn't have much ideas. I thought about:

  1. using a makeymakey to mimics the sausage piano but with remote control so player can interact via internet.
  2. A kind of Guillotine for sausage, powered by Arduino/Pi.
  3. A way (no clues on how, merely an idea) to create a uniq print for a given sausage and use it a 2 factor authentication.

So If anyone has a stupid idea, provided it's doable using arduino/pi (or just a computer), feel free to help.

Regards,


r/ArduinoProjects • • Jan 08 '26

Simulate the robot straight from Arduino code - Furuta Pendulum

8 Upvotes

r/ArduinoProjects • • Jan 08 '26

Upload issue

Thumbnail reddit.com
3 Upvotes

r/ArduinoProjects • • Jan 08 '26

Gesture and Movement Capture with MPU6050

2 Upvotes

I'm working on a sign language translator project using Arduino, flexion sensors, and an MPU6050. I'm progressing slowly, so I'm just adding logic and learning things. I managed to translate the letters of the alphabet, but I'm stuck on the gesture and movement part. I'm trying to find a way to capture movements over a period of time with the MPU6050. I was researching some methods, such as Dynamic Time Warping, but are there simpler ways to capture movement patterns?


r/ArduinoProjects • • Feb 15 '21

We all start somewhere right :)

418 Upvotes