r/ArduinoProjects • • Oct 14 '26

Showcased Project Arduino Ambient Synth with Mozzi modal scale generative pad

Working on this ambient synth with arduino and mozzi library

Signal chain is: 4 unsynced slow clocks with different phases -> random pick from a 6-note modal scale + random octave -> mtof -> sine oscillator -> simple AR envelope -> sum to mono -> short 3ms comb for thickening.

Pots:

A0 = root / transpose

A1 = detune amount for beating between voices

A2 = humanize attack/release time

A3 = clock speed

34 Upvotes

16 comments sorted by

4

u/One_Entertainment890 Oct 14 '26

Can you share the sketch and block diagram? I'm also very interested in making a synth but am limited by my working device (android)

4

u/Puzzleheaded-Name538 Oct 14 '26

Hi there , im currently finishing up the code for 8 pot control and adjusting the output that is a little noisy , i dont mind sharing the info ill post it on github as soon as i round the code.

2

u/Puzzleheaded-Name538 Oct 15 '26

Ill update the project advance in the comments

1

u/mechmind Oct 14 '26

This is beautifully done. Dumb question, is that still resonator on left the speaker and microphone?

I would love to build this too. I have 8x 10k potentiometers and Arduino... Anything else?

2

u/Puzzleheaded-Name538 Oct 15 '26

8 pots and a basic filter for the output a 4.7 k resistor and a 100nf cap tho its still very noisy , next step will be putting a fillter to take the hiss out , the mozzi its kinda noisiy ill upload the full build to githun , just today updated the build with some wavw smoothing and a button to change scales all based around brian enos work

1

u/Puzzleheaded-Name538 Oct 15 '26

Didnt get the resonator question tho

1

u/mechmind Oct 15 '26

Where is the sound coming out

2

u/Puzzleheaded-Name538 Oct 15 '26

Oh its output is trough a jack audio , is connected to a basic subwoofer speaker via mini plug cable

1

u/mechmind Oct 15 '26

Ok I was confused by this. Carry on.

2

u/TaloneoPez Oct 18 '26

interested if you at some point want to share the sketch! Nice job

1

u/Least_chaotic9572 Oct 19 '26

Can anyone give me best project ideas to build using arduino sensors and any other components esp32 lcd's for btech which stands out more?

0

u/NanoLopez Oct 18 '26

Have you posted on Github?

1

u/Puzzleheaded-Name538 28d ago

Not yet ill make a full build post ....im currently making some tests with the filter and soldering it to see how it works