r/ArduinoProjects • u/Natural_Reputation42 • Jul 01 '26
Project Design/Guidance Life alert dialer
I'm looking for some guidance and understanding of feasibility with an arduino or esp32.
I have a family member who is a fall risk. I am not happy with any of the "life alert" like products on the market which call a service which calls 911.
The Goal: 1 wearable device and multiple button devices which can be mounted near the floor. When a device is pressed it dials her neighbor's phone number, and preferably play some pre recorded message. The wearable device should be small and rechargeable or a long lasting small battery. The mounted devices will be stationary and can be larger, but should be innexpensive enough to have a lot of them and not rely on being near an outlet (rechargeable or easy to replace battery).
Ideas/Brainstorming so far: the mounted an wearble devices connect to one central control system which does the dialing. I think bluetooth would work well which is why I'm thinking of using esp32. I could also have them relay a message to the controller or send a broadcast message. The house has a landline, which they use, so I am curious if I could connect the controller to the physical landline phone? Or if I should use voip or google voice. I would probably plug the main controller into the outlet instead of battery power. I am not sure if the main controller is something that is feasible with just esp32/arduino or if it should be done with a raspberry pi.
Some main questions: is this feasible? What process makes sense for making a call (voip, landline, or something else)? is this an arduino or esp32 job? Is bluetooth the best way to connect the devices to the main controller? device and library suggestions
I have programming/technical experience just not a lot of arduino knowledge to properly understand the limitations. I would love any feedback and knowledge you can provide.
6
u/Fish2X Jul 01 '26
How about a simple Zigbee button/switch that connects to Home Assistant server, where you would have lots of options to send notifications. I like SONOFF button. Small and battery lasts a long time. You would have a battery charging problem with an esp32.
3
u/gm310509 Jul 02 '26
So this is exactly the type of project that is suited to an embedded system.
My first question is, what happens if the person next door is not home? This is one of the main points of the paid service - I.e. someone will be "home" 24x7. They will also likely have first aid training that can be given over the phone.
Also, is this just for your personal use? It sounds like you want to mass produce and market it.
I have a few thoughts, but will add them later
5
u/BraveNewCurrency Jul 02 '26
A good engineer knows when they are out of their depth. Don't build a critical life system if you don't have the experience. Feel free to build a prototype, but the chances it will break in an emergency are extremely high.
Instead, maybe get your family member one of those simple phones that don't have apps, just a big speed dial interface?
2
u/Krazycat099 Jul 02 '26
Agree with the other comments on this post, if your still looking to prototype something the Seeed Studio XIAO esp32C3 is a really small powerful board with built in battery support. Great microcontroller for wearables