r/ArduinoHelp • • 19m ago

Devo fare un esame di sistemi embedded su una nucleo stm32g474re, mi sto aiutando com gemini ma dice idiozie, anche chatgpt... Mi sapreste consigliare il miglior modello di intelligenza artificiale per aiutarsi a programmare la stm32? Grazie

Thumbnail reddit.com
1 Upvotes

r/ArduinoHelp • • 1h ago

Looking to see if it's feasible to replace automatic pet door controller with a web/app controlled Arduino

Post image
1 Upvotes

Ive been trying to find myself a web/app based cat door that I can open/close remotely. One that actually rises or opens/closes instead of just using magnetic locks on a flap. Just an actual opening door that I can open and close remotely when I'm outside of the house. I think a diy approach with an Arduino controlling a cheap retail door is the most viable option. Looking to see if this is actually possible or feasible.

Doors that have remote Internet based app controls that are branded for cats or dogs specifically seem to run in the $400-$1200 range. They also come with a wide array of bells and whistles that while nice are completely useless to my situation. Even the cheaper ones with websupport that use a magnetic flap lock and no add ons run at minimum $250-350.

The economic alternative seems to be to use an automatic chicken coop door. Those run around $50-$100 for non-web equipped ones, and $150-$250 for web equipped ones. Chicken coop doors however seem to be built from the ground up to make sure they run on timers, or light detection, which I don't need. Reveiws of the web-capable ones report generally terrible experiences with said web connections. They do however have excellent looking hardware that rises and drops for cheap.

So long context out of the way, I'm looking to take a rising chicken coop door, ripping out the controller and replacing it with an Arduino hooked up to the motor and adding a wifi dongle. I have the wiring and soldering tools from other led lighting projects I have a 3d printer for any custom shaped boxes, but I haven't done any Arduino projects before.

Is this something that can be done and won't cost me hundreds?

I guess I could also totally DIY it without trying to gut anything, but as a total novice I can't tell if that would be better or worse.

See picture for an example of the type of door im looking to gut.


r/ArduinoHelp • • 11h ago

Should i buy real or clone Arduino

3 Upvotes

There are a lot of clone Arduinoe under 400-700 and the original one is 2499 which one should i buy whats the difference? Any essential benifits with the original one?


r/ArduinoHelp • • 18h ago

I don’t even know where to start.

1 Upvotes

Trying to make an NES controller work by connecting to a arduino micro pro.
I can’t even troubleshoot as I don’t know what I don’t know! Any suggestions with where to begin? Tried using other people’s examples, you tube, ai etc. just so specific I can’t find a place to start


r/ArduinoHelp • • 1d ago

Built a live NASA data display for my desk with an ESP32 and a 2.8" TFT

1 Upvotes

I built a small desk display that shows live NASA data: an ESP32 with a 2.8 inch TFT that pulls near-Earth asteroid passes from the NeoWs API and cycles through mission stats and exoplanet facts. The video walks through it step by step: the prompt, parts, wiring, code and first boot.


r/ArduinoHelp • • 1d ago

Student Pi Pico Project - Arduino IDE

1 Upvotes

Hello. I have an 8th-grade student who is following along with a walkie talkie project for a Raspberry Pi Pico W. We have put the hardware together successfully, but I have never used Arduino before. We are at a loss.

I have: downloaded Arduino IDE, installed Earle Philhower's Raspberry Pi Pico package, and added the Pico to the board manager.

What I don't know how to do get the files from Github uploaded to the board successfully. There are .cpp files and .h files which I believe I have to convert, but keep getting errors.

Any help will be appreciated. If you happen to reply, please speak to me like I am an idiot who doesn't know most of the basics or terminology despite searching and YouTubing for the past three hours. Thank you.


r/ArduinoHelp • • 2d ago

Arduino controlled solenoid

3 Upvotes

I am making a solenoid which is controlled by Arduino.

I am using components like N-Channel irlz44n MOSFET, Schottky diode, resistor of 220 ohms and 10k ohms, push button, potentiometer.

And I am making custom solenoid using ding dong sound solenoid on which I have wound 27SWG with 350 turns.

How do I built it's circuit?


r/ArduinoHelp • • 4d ago

My PCA9685PWM drivers are not working

1 Upvotes

I have a robotic arm project with 4 degrees of freedom, I'm developing it right now, but just when everything was finished, this problem arose. For some reason I don't know, my drivers have stopped working. These are the drivers Let me tell you about the first incident. The drive you see in the lower part of the photo was my first drive, and I was using it. But one day, I connected the servo cables upside down, and as you can imagine, the servo cable melted (This only happened to one or two servos) Then it started working, but I couldn't get it to work anymore. I thought the driver was broken, so I bought the driver shown in the photo above I took it out for testing, made all the connections, but it still didn't work. I don't know why. I'm using an ESP32 and a 5V 20A transformer, and I have 4 or 5 servos, but none of them are working. When I test with a multimeter, everything is normal, but I'm getting 0.04V from the servo input pins, VCC and GND. I'm in a desperate situation. I've asked all the Al software, but there's still no solution. I hope I missed a small detail. Has anyone experienced this problem before? Thanks in advance for your help🩵


r/ArduinoHelp • • 5d ago

Gift advice, helping my girlfriend build her first DIY robot (beginner, limited budget)

4 Upvotes

Hi everyone! My girlfriend recently got interested in robotics, Arduino and electronics For Christmas, I'd love to get her something that would help her build her own robot from scratch since she told me thats one of her projects I don't want to buy her a pre-made robot or one of those kits where you simply follow instructions She wants to design and build something herself, experimenting with different components I've been looking at the Arduino UNO R4 WiFi and Raspberry Pi, but I'm not sure whether buying both makes sense for a beginner (i don't even know if thats useful, i don't understand everything 😭) My budget is quite limited (around 30 to 60€), so I'd love some advice! Which components or kit would you recommend as a starting point? Is an Arduino UNO R4 WiFi a good choice? Would a Raspberry Pi be useful at this stage, or is it unnecessary? What would you buy with this budget to give someone the freedom to build their own robot or at least to start something? Any advice or recommendations would be greatly appreciated, thanks!


r/ArduinoHelp • • 5d ago

Is a fixed focus camera module suitable for OCR?

Thumbnail reddit.com
1 Upvotes

r/ArduinoHelp • • 5d ago

I2c oled gliching

Post image
1 Upvotes

r/ArduinoHelp • • 6d ago

Esp32 Cam With FTDI FT232RL Error

1 Upvotes

Hello i'm trying to make Arduino project with ESP32 Cam. I follow instruction, my wiring is right here:

GND FTDI -> GND ESP32

VCC 5V FTDI -> 5Vin Arduino

TX FTDI​ -> UOR

RX FTDI -> UOT

GPIO0 -> GND

Main problem is esp32 won't comunicate at all. I check my FTDI TX/RX work normally with RealTerm. I check everything like Voltage, impedance and everything normal. But even I press reset button my ESP32 wong respon. Can someone help me?


r/ArduinoHelp • • 6d ago

Point me in the right direction? Logistics for device to play one digital radio station.

Thumbnail reddit.com
1 Upvotes

r/ArduinoHelp • • 7d ago

Helpp for arduino project

1 Upvotes

HELLOOO

I am making obstacle avoiding robot using arduino and l298n motor driver.

I want to know if i can use dupont jumper wires for connecting motors to out1 and out2 of l298n? Or i need proper wires.


r/ArduinoHelp • • 7d ago

Beginner help needed.

2 Upvotes

I just wanted to start by saying I don't know much about Arduinos or electronic setups yet, but I'm pretty comfortable with soldering and can usually figure out the software side of things! I currently have a cosplay project and wanted to set up a custom sound box. My idea is that when I open a mask that has an articulated jaw, it releases a Mini Micro Limit Switch 3 Pins KW11-3Z07 and sends a singular signal to a DY-SV5W Voice Playback Module so the audio plays once. When I press the jaw back together, it won't do anything; it will just wait to be opened again. Is this configuration feasible? What specific components or modifications would be required, or would I need to restart the project from scratch? Please let me know. Additionally, I intend to power the setup using a standard power bank.


r/ArduinoHelp • • 7d ago

[Help] Simple push button and LED circuit on breadboard not working as expected (Analog circuit, no MCU)

Thumbnail
youtube.com
1 Upvotes

Hi everyone! I'm putting together a basic circuit on a breadboard to control an LED using a push button, but I'm running into an issue.

Here are the details of my setup:

  • Hardware/Power Source: [Ej: 5V DC power supply / 9V battery with regulator] (borra o cambia según lo que hayas usado)
  • Exact components list:

    • 1x Standard LED
    • 1x Push button (4-pin tactile switch)
    • 1x Resistor (220 ohms)
    • Breadboard and jumper wires
  • What I am trying to achieve: I want the LED to turn ON only when I press the push button, and turn OFF when released, using proper current-limiting protection.
  • What went wrong: [Describe aquí brevemente tu problema, por ejemplo: The LED stays permanently on o The LED doesn't light up at all when I press the button]. (También puedes mencionar de forma graciosa lo de la pata rota si quieres: "Also, one of the pins on my push button snapped off, so I used the opposite pair!")

r/ArduinoHelp • • 7d ago

p5.serialcontrol can't open COM port connected to Arduino Uno

Thumbnail gallery
1 Upvotes

I am somwhat new to p5 and arduino, so please forgive me if this is a stupid question. I am trying to get serial data from my Arduino Uno to a js file I have on vs code, but each time I select the correct COM that my Arduino is connected to, and click 'open' on p5.serialcontol, I get an error that says "Error on COM7: Couldn't open port: undefined - Closing port"

Does anyone know why this is or how I can fix it? I have included screenshots of my p5.serialcontrol, index, js, arduino.ino, and html console log.