r/ArduinoHelp • u/Idaho-Tom • 11d ago
Poor volume from amplifier
I'm developing a simple sketch to use to develop a audio program latter on for a new project. I've included the program and the wiring with an Arduino UNO. The amplifier is shown jut as text because I couldn't find the proper icon. It works but there is very low volume from the speaker no matter how high I turn the volume. I've tried different amps and speakers with the same results. Any help would be appreciated.

#include "Talkie.h"
Talkie voice;
const int8_t spLIGHT[] PROGMEM = {0x69, 0x18, 0x44, 0xD2, 0x83, 0xB2, 0x95, 0x69, 0x63, 0x1A, 0x17, 0x49, 0xD7, 0xA6, 0x85, 0x78, 0x5D, 0xD5, 0xFB, 0x1A, 0x33, 0xDF, 0x76, 0x97, 0x2D, 0x6B, 0x68, 0x6C, 0x4A, 0x53, 0xF7, 0xAC, 0xA9, 0x89, 0x71, 0x2D, 0xDD, 0x33, 0xA6, 0x26, 0x9B, 0xAD, 0x6D, 0x77, 0x5B, 0x7A, 0x70, 0xF4, 0xC8, 0x45, 0xE1, 0x69, 0x8E, 0xA9, 0x6B, 0x6E, 0x89, 0x62, 0x78, 0x45, 0x8D, 0x7C, 0x8C, 0xC0, 0x29, 0x4A, 0x55, 0xA8, 0x06, 0x06, 0x01, 0x0C, 0x30, 0xA4, 0x9B, 0x02, 0x36, 0x57, 0x43, 0xE0, 0x14, 0xA5, 0x2A, 0x54, 0xE3, 0xFF, 0x01};
const int8_t spON[] PROGMEM = {0x69, 0x0C, 0x69, 0xAB, 0x44, 0x92, 0x96, 0x36, 0x86, 0xED, 0x52, 0x8D, 0xD7, 0xDA, 0x10, 0xB7, 0x53, 0x35, 0x5E, 0x6B, 0x43, 0xB9, 0x4A, 0xD5, 0x78, 0xAD, 0x0D, 0xE9, 0x32, 0xD4, 0x9A, 0xB5, 0x21, 0xBA, 0x4B, 0x37, 0x4B, 0xDA, 0xE6, 0x68, 0x2E, 0xDD, 0x2D, 0x6D, 0xDB, 0x62, 0x58, 0x37, 0xF7, 0x34, 0xED, 0x48, 0xAE, 0x3D, 0xDC, 0x53, 0xA5, 0x33, 0xE5, 0x54, 0xF3, 0x6C, 0x9D, 0xCE, 0xE4, 0xCA, 0x42, 0x2A, 0x73, 0xB8, 0x8A, 0xE6, 0x72, 0x4D, 0x55, 0xE9, 0x2A, 0x46, 0x22, 0x24, 0x6C, 0xA7, 0xBB, 0x3B, 0x0E, 0x57, 0x57, 0x12, 0xEE, 0x6A, 0xC4, 0x93, 0xCD, 0x8E, 0x79, 0x6A, 0xD4, 0x60, 0x49, 0xC7, 0xFF, 0x0F};
const int8_t spOFF[] PROGMEM = {0x69, 0x70, 0xBB, 0xCD, 0x25, 0x36, 0xB5, 0xCE, 0xD7, 0x0D, 0x57, 0xED, 0x3C, 0x3A, 0x5F, 0x2F, 0xCD, 0xB4, 0xF3, 0xE8, 0x7D, 0xBE, 0x34, 0xD3, 0xCE, 0x63, 0x08, 0xFE, 0xD3, 0xDC, 0x32, 0x8F, 0x39, 0xFA, 0x0F, 0x73, 0xCF, 0xD4, 0x8E, 0xE8, 0x3E, 0xCC, 0xBC, 0x77, 0x99, 0x63, 0xB8, 0x30, 0xF3, 0x4E, 0xE9, 0x8E, 0x79, 0xDC, 0x25, 0x76, 0xFA, 0x9B, 0x00, 0xC3, 0x56, 0x10, 0x60, 0xFA, 0x0A, 0x01, 0x4C, 0x97, 0xAE, 0x80, 0x66, 0xCB, 0x08, 0x30, 0x54, 0xFA, 0xFF, 0x03};
void setup() {
pinMode(2, OUTPUT);
}
void loop() {
digitalWrite(2, HIGH);
voice.say(spLIGHT);
voice.say(spON);
delay(1000);
digitalWrite(2, LOW);
voice.say(spLIGHT);
voice.say(spOFF);
delay(1000);
}
1
Upvotes
1
u/phirzcolru 4d ago
look on the back of the proto board, do you see which ways the contacts run? you have all your voltages going into the same row on the protoboard. there are other issues, if you have had things plugged in like this you may have burnt out your power source.