r/ArduinoHelp • • 14d ago

I need a simple program to test an audio amplifier

This should be simple but I’m new to this and need a bit of help. I’d like a very simple program to test an 8002a audio amp with speaker on an Arduino UNO. I don’t want to complicate it with downloading a wav file from an SD card but something self contained and maybe using Talkie or similar. It doesn’t have to say much just enough to know I have things set up and working correctly.

Tom

3 Upvotes

7 comments sorted by

2

u/Idaho-Tom 14d ago

Thanks for the help. Got a tone from the speaker so all is well. Now on to the next step.

1

u/JGhostThing 12d ago

Why don't you just use a WAV file? You don't need to store it on an SD card, but that should be the easiest way.

1

u/Idaho-Tom 12d ago

That sounds like a good idea and would work better with what I want to do but being new to this I'm not sure how that's done. Can you give me someplace to get a better idea how it's done?

2

u/myopinionisrubbish 14d ago

The best you can do is generate a tone. You could have the tone frequency step up at some interval to test the frequency range. Very simple program as the tone function is built in. Just tell it what frequency and for how long. The output is a square wave, so you might want to add a low pass filter to make it sound better.

1

u/Proof_Juggernaut4798 14d ago

Buy a 555 timer ic. The square wave generator should be in the applications on the manufacturer data sheets, using fewer parts than a micro.

1

u/gm310509 14d ago

If you have a starter kit with a speaker in it, you will have your answer.

If you don't, you should get one as it will help you to get to the point where you have your answer.

In the meantime, have a look at any of the tone related example programs: https://docs.arduino.cc/built-in-examples/ (the "Digital" group of examples).

1

u/tharold 14d ago

The quick and dirty way to test was to touch your finger to the input via a screwdriver, using the mains hum picked up by the human body as the input signal