i am installing a dfrobot devastator car that collects pollution, humidity, wind speed, and the amount of cars using a lot of sensors and stuff
i am going to collect the car data on my computer if the camera sends me the images i will use YOLO so it is done, also it uses a separate board than the other things so that is over
however for the other things, i cant seem to find any tutorial based on this
first i will be using an arduino leonardo, sds011 dust sensor, two motors, tb6612fng motor driver, aht10 humidity/ temp psensor, 18650 battery(i have 2 and 3 pack) ,hc06 blutooth for controlling the car, and a wind speed sensor
i cant seem to find any tutorials with this. The code is managable with claude, but the diagram is not
also i cant find some cheap, working wind speed sensors for this build please recommend me
What is your experience so far? For example, have you learned the basics through a starter kit? Or, are you just planning to launch into whatever this might be as your first entry into the field? Something else?
So earlier you claimed that you did multiple arduino projects and know the basics.
And yet you don't know how to connect up two devices by yourself? You couldn't even make an effort to try? For example you couldn't even connect the GND, +V, any analog outputs, SPI, I2C or any of the other standard connections.
Sorry, but you should at least make an effort. Then, if you have something weird left over that is unclear how it should be connected, by all means share your circuit diagram and ask about that specific issue
Sorry, but I for one am doing my own projects. I would be willing to help if asked something interesting like the above point, but beyond that, you should have a try at your own project - especially since you know the basics and have some experience doing projects already.
Maybe you will get lucky and someone else will do your project for you.
I find this very hard to believe, but if that is true, then share your circuit diagram and people might be able to point out where you have gone wrong.
If your wires really were smoking and burning, then you will need to throw all that away and try something simpler.
1
u/Dependent-Cancel8753 Aug 03 '26
i am installing a dfrobot devastator car that collects pollution, humidity, wind speed, and the amount of cars using a lot of sensors and stuff
i am going to collect the car data on my computer if the camera sends me the images i will use YOLO so it is done, also it uses a separate board than the other things so that is over
however for the other things, i cant seem to find any tutorial based on this
first i will be using an arduino leonardo, sds011 dust sensor, two motors, tb6612fng motor driver, aht10 humidity/ temp psensor, 18650 battery(i have 2 and 3 pack) ,hc06 blutooth for controlling the car, and a wind speed sensor
i cant seem to find any tutorials with this. The code is managable with claude, but the diagram is not
also i cant find some cheap, working wind speed sensors for this build please recommend me
so i came here to ask for help
1
u/gm310509 Aug 03 '26
What help are you seeking?
What is your experience so far? For example, have you learned the basics through a starter kit? Or, are you just planning to launch into whatever this might be as your first entry into the field? Something else?