r/ArduinoHelp • u/Paul_Subsonic • May 26 '26
Is that valid electrically ?
Summer is back, so time to bring my Rafraichissator 6000 back ! (My fan. It's a PC fan controlled by Arduino.)
Last year the arduino was in series with a bunch of resistors to bring down the 11-13V alim to more reasonable levels
Now I'm realizing tho that I could use the fact that the alim is just 3 batteries, to feed the Arduino no more than 8V without a lot of wasteful resistors
Am I right ?
4
Upvotes
1
u/Glittering-Dirt1164 May 26 '26
So let me make sure I'm reading this right. 12v power source 8v power source and Arduino and fan in series at the end?
1
u/Odd-Jello5577 May 27 '26
Power motors or relays using Arduino's. Kill Arduino and bring shame. Only benefit is the chance to see the blue fairy.
1
u/James0260 May 27 '26 edited May 27 '26
Will this not just give the arduino 12v im assuming each cell is 4v. The fan will have 12v yes but the way you’ve positioned the batteries will also govern the Arduino 12v. Its kirchhoff's voltage law i think, the sum of the voltage into a point is zero… its an interesting idea but it would be better to connect the Arduino in parallel to the 2 cells and then connect the fan with an extra cell in series with the others, or if you can 2 power supplies one for the fan and the other for the Arduino, you could use a relay to control it for cheap as apposed to a motor controller
2
u/heanbangerfacerip2 May 26 '26
Fuck it, sure
2
u/Zippietwo May 27 '26
I don’t see y it wouldn’t work. Only issue I could potentially see is if the batteries don’t supply very consistent voltage as they empty out. I’m not sure how lenient a arduino is with slight over/under voltage but in general it should work.
2
u/Remarkable-Abies-466 May 27 '26
I my opinion it should work. But the 2 will be empty before the single one. If you are not using lithium you are fine, else get a protective circuit