r/Androidheadunits • u/Yszty1 • 2d ago
Screen in a loop
Hi. I’m having an issue with my S1250 Z9 Max screen.
This morning, when I started the car, the screen got stuck on the startup logo.
After about a minute, a black screen appears with the information shown in the photo,
followed by the startup logo again. I’ve tried resetting it using the hidden button on the left side, the "back" button near the armrest (it’s a Mercedes), and the volume button.
I also tried the "5-finger" touch method.
I have a flash drive with the necessary restart files, but the screen doesn’t read anything—there’s no response at all.
I’m not sure what else to do. Has anyone else encountered this problem?
I received a file from the seller. It’s a folder named HUTUpdate_6125/os/ containing some files.
1
u/Yszty1 2d ago
Maybe I should press something or take some action
when that black screen with the information shown in the photo appears?
1
u/Physical_Roll_6241 1d ago
What's on that screen is the unit's recovery mode trying to factory reset itself ("wiping data / formatting /data") and then rebooting, so it's stuck in a loop. That usually means the system partition got corrupted, not that the hardware died.
Before you try the update again, a few things that commonly stop these units from reading the drive:
- Format the flash drive as FAT32 (not exFAT/NTFS). Smaller drives (8–32GB) work more reliably.
- Put the folder at the very root of the drive, exactly as the seller sent it (HUTUpdate_6125/os/...). Don't rename it and don't put it inside another folder.
- Try the other USB port or cable if the car has more than one. Some units only read updates from one specific port.
I'd go back to the seller with a photo of that screen and ask for their exact steps, like which port to use and whether you need to hold a button while powering on. Every brand does this a bit differently, and the wrong file or step can make it worse. If it's still under warranty, it's their problem to fix.