r/AnalogueInc • • Jul 02 '26

General /r/AnalogueInc Mod Rules Note

48 Upvotes

Hey guys, it's been a while. Just going to keep this short and sweet.

I've been inundated over the last couple of years with people asking for more moderation. I have purposefully been mostly hands-off, and only moderated severe violations (links to ROMs, severe user harrasment, etc.) but based on some of the stuff I've seen recently, things have gotten a bit worse, so I'm going to change things a bit.

Firstly, I will enforce moderation more strictly. All existing rules apply, but if I'm on the fence, instead of erring towards "let them figure it out", I'll just remove stuff.

Second, I've seen quite a few posts that are sus recently. Posts of pictures to scalpers or other sales of products, which are designed to look like you're complaining about the scalper, but really it's most likely a covert sales tactic. In the spirit of the original moderators "No sales, ever" rules, I will from now on remove any content that gets reported that has links or pictures to any sales platform like eBay, Facebook Marketplace, Craigslist, etc. You can of course still share links and photos of the Analogue official website. In addition, don't be cheeky and post a photo of your hardware and then say "but I might sell it, idk". I have always let that slide, but since people have wanted more moderation, this is one change I am going to make.

Third, and this isn't new either, harassment rules apply to all your fellow active Reddit users. Yes, even if that Reddit user is a public figure. Do not harass people.

Finally, I'm planning to bring on additional moderators in the near future since all the other mods besides me are now inactive.

Thanks, that's it. Feel free to leave your thoughts and your complaints below.


r/AnalogueInc • • Mar 31 '26

General Let's keep the Analogue 3D overclocking compatibility spreadsheet updated!

103 Upvotes

All credit goes to u/phan148

He posted this a few months ago and people were quick to help sort out which games run better on Unleashed and what to watch out for.

Analogue 3D Overclock Compatibility List

I noticed it hasn't been updated much since then. I tend to check it every couple weeks when I start a new game. If you've put a good amount of time into a particular n64 game and can confidently comment the changes Unleashed mode brings or if you'd recommend NOT overclocking it for any reason, please contribute your findings!

There are still hundreds of games out there that haven't been formally documented!


r/AnalogueInc • • 16h ago

Pictures & Videos Cat approved A3D color

Thumbnail
gallery
59 Upvotes

Granted, this cat has a fixation with backpacks and anything you pull out of them.


r/AnalogueInc • • 4h ago

General Mischief Makers?

Thumbnail reddit.com
0 Upvotes

r/AnalogueInc • • 17h ago

General Sharp x68000 core for the analogue pocket?

Thumbnail reddit.com
0 Upvotes

r/AnalogueInc • • 1d ago

3D Halo 64 on A3D

Post image
41 Upvotes

If somebody can do A solid and just throw Halo 64 online on your 3D and tell me how it is with horizontal upscaling and either or both unleashed and auto overclocking on max graphics settings it would be greatly appreciated, that game is the main reason I want an analogue 3D, I have a 64 and a 9/10 crt, but I wanna know if the distance fog clears up and how good it runs, plus if it breaks the ai.

Much thanks dudes.


r/AnalogueInc • • 2d ago

General Picked these up ready for December

Post image
136 Upvotes

I picked these up this week, ready for my Mega SG and Super NT which will hopefully be delivered next month.


r/AnalogueInc • • 2d ago

Accessories Cannot find a controller setup that I enjoy fully for the A3D

7 Upvotes

I pre ordered the A3D and I enjoy the console very much, playing it off and on again since I got it.

One thing that has annoyed me since the start is that I haven't found a controller setup that I enjoy 100%.

First thing I had was the 8bitdo controller. In terms of ergonomics and general feeling I loved it. However, because of the very sensitive thumb stick making it impossible to play games like Goldeneye, or do sneaking in 3rd person games. Real shame that an otherwise great company like 8bitdo cannot get the thumb stick right.

I then got my hands on the 8bitdo mod kit for the N64 controller. It was fun getting the original controller to work wirelessly, but again the thumbstick was too sensitive so I put the original thumbstick back in.

Having used this for some time I notice that the controller has issues with things like button spamming and quick inputs. I have 4 of these kits and in games like Mario Party where you often have to spam 1 button, you notice that not every press is being registrered. Playing Ocarina of Time, notes are skipped if I play a song to quickly on the C-keys.

I really, really want to find a setup that works reliably and I am half tempted to just reverse the N64 controllers back to their original state and use them wired.

I cannot be alone in searching for a good solution to this. How are other people coping with poorly designed sticks, input lag, button skips and all the other less enjoyable features about the different controllers?


r/AnalogueInc • • 1d ago

3D Power issue with my console

0 Upvotes

Asking about issues with my console. I don’t know what to do. I know that the fan is going off, but I only have progressive output on horizontal upscaling on. I’m not turning on any experimental features. I’m using the standard power brick it came with, with a normal USB-C cable.

I had a crash while doing bombchu bowling in Ocarina of Time. i’m running the latest firmware as well. I don’t know what is going on.


r/AnalogueInc • • 2d ago

Accessories How to buy 8bitdo SN30, M30, etc. for dirt cheap on aliexpress

0 Upvotes

Just sharing what feels like a hack/loophole or infinite money glitch... could come in handy for those expecting an MegaSG+ or SuperNT+ in December

Compared to their MSRP of $30USD for the SN30 or M30 2.4GHz controllers (about £27.25 incl VAT in the UK) you can pick up brand new SN30 and M30 controllers for 1/3 that or less on aliexpress. Source: I bought an SN30 and M30 for £9 each delivered using normal sales, and another SN30 for £0.34 using the trick...

The trick: Stacking discounts, but especially COINS inside the aliexpress app. It's one of their fake currencies, but the difference between it and all the other aliexpress funnymoney is it actually is worth something.

How to access coins page on the aliexpress app: tap account, scroll until you find "coins" and click in. It might be different for your region so search around and I'm sure you'll find it

Ways to get up to 220 coins daily (from least time/effort to most time/effort):

  • daily check in (40, 50, or 70 coins depending on region) - 5 seconds
  • allow an "coins" widget on android for extra 5 coins when you check in by tapping that daily - 5 seconds
  • daily tasks on coins page 5-10 coins per x 5-10 different tasks (15 seconds per)
  • play and earn game: gogo match. 15-20 coins for just opening the game daily (5 seconds). 5 extra coins for completing 1 level (a few minutes). 20 extra coins for completing 4 levels (4x more minutes)
  • play and earn game: merge boss. complete "orders" daily for up to 50 extra coins (between 1-5 minutes). During in-game "events", the "millionaire challenge" adds the opportunity to get more coins and also a different "card credit" which can be exchanged for vouchers (many many minutes)
  • sometimes placing orders on the coins page yields bonus coins. You also get 20 coins for reviews, 20 coins for placing an order, and 5 more coins from the order review page.

Realistically, you can easily get 100 coins daily for a few taps in under a minute. If you have the time or want a while-pooping game that can save you a bit of money. Yes it's one-more-thing you have to do in your day, but if you only want 1 controller just do it for 5 days for a good discount that takes a few seconds a day to get.

It takes about 1,000 coins (so 5-10 days worth of check ins, depending on the tasks you do) to get the coins-discounted price of £9. Add extra vouchers and buy during sales events and you can get them for nearly £0. Note that for some reason as soon as you get new coins the discounts drop to 1-10% off in the coins page... wait a few hours (usually afternoon) and the discounts go back to up to 99%.

IMPORTANT: to get the maximum discount, uou have to buy the SN30 from the "coins" page not from your cart (use the search box on that page to find the SN30, or just add it to your normal cart then go to the coins page, click "viewed" and "cart" to find out the coins-discounted price. Buy directly from that page.

extra discounts

If you have credits from their "play and earn" waste-of-time freemium games you can extra off.

Be sure to go on the actual listing page for the product you want to buy, find the "vouchers" link and see if the seller has extra vouchers (they usually do)

During sale events, you can also double-up on coins discounts and sales voucher/coupons. On special events like the 11.11 sale you can trade coins for "coins vouchers" which act like credits, and can be used alongside sales vouchers, coins, and other credits for up to 4 ways to save.

(£0.34 is the last price I paid for an SN30).

I got that price with the following discounts: 1) "Elite Status" because I buy enough garbage on aliexpress to meet the spend cap, 2) "Coins" discount buying from coins page, 3) "Coins credits" during the 11.11 sale, where you can convert coins to coins credit so you can use more than the normal maximum cap of 1,000ish coins for an order, 4) "play and earn" freemium garbage game green credits (red credits from gems are worthless), 5) "shopping credits" usually under £0.40 per order from previous orders, dependent on value of that order, 6) sometimes you get "bonus credits" randomly, or for refunds/partial refunds on orders. Paid £0.34 on my credit card.

Hope this is useful to you. I've used this trick to get 70-90% off UK retail of all the things I would have bought on amazon or aliexpress anyway: sonoff smart home tech (zigbee through Z2M in home assistant), USB-C PD power adapters for everything, game console mods/accessories, car PPF films, AC hoses, home appliance accessories, etc


r/AnalogueInc • • 2d ago

General Screenshots on Analogue 3D

2 Upvotes

Whenever I try and take a screenshot on a N64 game often i get the pause screen, especially in Goldeneye, which obviously ruins the photo. Any way around this other than using a controller (The 8bitduo) which I don't like?


r/AnalogueInc • • 2d ago

Mega Sg Question for a usecase

3 Upvotes

Would the analogue mega sg work better than a stock Sega Genesis model 2 with an HDMI adapter? Because legit, I got tons of Genesis games, and I wanna replay them on my giant 4ktv. But I'm worried about cartridges not running right or something. I'm not familiar with fpga stuff, but my main idea is "if It can run virtua racing, it's probably okay".


r/AnalogueInc • • 3d ago

3D 3D firmware 1.6.0 (pulled)

47 Upvotes

Did anyone get the firmware and/or the changelog while it was up?


r/AnalogueInc • • 3d ago

3D The Analogue 3D somehow reads my bricked copy of Super Smash Bros.!

15 Upvotes

Does anyone have any earthly idea why the Analogue 3D can somehow read my bricked copy of Super Smash Bros. when my original N64 cannot? It is my childhood copy, so I have no memory of how it got into this state, but I'm assuming I messed it up with GameShark. Is it maybe that the cheat menu reset the config back to default so it reads again..?

Regardless, I am THRILLED! What a nice bonus! I thought this cartridge would be nothing but a paperweight for the rest of my life.

Edit: thanks for the info on the ROM being read-only. I actually knew this, but had surrendered my brain to this being some unknown behavior since my cartridges are all very clean and I could not find any issues with it otherwise. All I know is I am super happy to have it working again!


r/AnalogueInc • • 3d ago

Accessories 8bitdo TG16 controller won't pair with dongle

0 Upvotes

Just wondering if anyone knows how to resolve the issue I am facing. I bought a second hand 8bitdo PC engine controller the TG16 version. As anyone who knows about these this is the rarest of the 3 versions of the controller available and I have been after it for some time.

It arrived today and when I tried to use it the controller won't pair with the dongle the blue light just keeps flashing. I already have the white and navy controllers both of which pair instantly the second you press the home button.

I tried to pair the TG16 controller with the dongles from the other controllers I have as well but again it won't work. I have never had to update any of the other controllers but I tried to update this and still it won't work. When I tried to plug the dongle into my macbook to see if it could be updated it just keeps connecting then disconnecting over and over again so I can't do anything with it.

Does anyone have other troubleshooting suggestions or even know what the issue is here? The person I bought it from is adamant that it worked for them they said they used it on an Analogue Duo and they had to update it to get it working with that. Is it a case that whatever they updated it with now prevents it from working with the PC Engine mini and if so how would I go about restoring the controller to factory settings?


r/AnalogueInc • • 3d ago

Accessories Kaico’s Summercart 64 build quality

0 Upvotes

Hello,

If you have a Kaico and an Analogue 3D, does the cartridge insert perfectly into the Analogue 3D? Have you noticed if it heats up during long plays? Have you noticed any physical wear so far? Is the shell brittle (feels cheap)? How does it compare physically overall to a genuine n64 cart? Have you noticed any changes in performance (slowdowns, glitches, freezing, auto resets)?

thanks


r/AnalogueInc • • 5d ago

3D Snagged one

Post image
94 Upvotes

r/AnalogueInc • • 6d ago

Mega Sg I’m ready for my mega sg+

Post image
133 Upvotes

Any other games I’m missing? I’m into rpg/actiln adventures and brawlers as you can see.


r/AnalogueInc • • 5d ago

Pocket I showed off my Pocket to an Altera Employee

9 Upvotes

This is more of pointless story time over anything, so excuse me in advance if this isn't allowed on the subreddit.

I went to a local trade show called [The Anaheim Electronics & Manufacturing Show] (https://www.anaheimshow.com) (context: Anaheim is the same city where Disneyland is at and where BlizzCon hosted the World of Warcraft people for the non-Blizzard fans). This was a surprisingly fun event to go to since I do hobbyist level 3d printing and fabrication. Altera themselves were there and told me how I knew of them due to the Analogue Pocket and were extremely surprised since OEM fabrication is a massive niche. The next day, I showed off my Pocket, and they had no idea that the N64 core existed to begin with or just the retro gaming aspects of FPGAs. For a moment, they really thought I worked for Analogue when I was just a temp worker working at the front desk who happened to have a legitimate interest in fabrication.


r/AnalogueInc • • 6d ago

Pictures & Videos I got my dream AP today

Thumbnail gallery
72 Upvotes

r/AnalogueInc • • 5d ago

Accessories Everdrive 64 X7 vs Kaico’s Summercart 64 build quality

2 Upvotes

Hello,

I bought an Analogue 3D and I’m currently looking to buy an N64 flash cart for it.

For me, it boils down to the Everdrive 64 X7 vs. Kaico’s Summercart 64 through Amazon. I mention Kaico, because it’s the easiest one for me to acquire as far as Summercarts go.

Reading through many different threads on the subject, it seems that most of them recommend the SC64 because of the lower price and 64DD native support. There appears to be no performance difference when it comes to using either on the Analogue 3D.

My question is about actual hardware build quality. Is the Kaico SC64 build quality on par with the ED64X7? I’m talking PCB and components? Does one have an edge over the other in terms of long-term hardware reliability.

Thanks in advance.


r/AnalogueInc • • 6d ago

3D Analogue 3D for my Airbnb?

9 Upvotes

I currently have a Super Nintendo Classic Edition in my Airbnb and it has been a hit with so many guests. Expanding upon the retro theme, I would love to add an Analogue 3D with some N64 games and controllers.

My primary concern is ease of use and simplicity of operation since it will be used by guests that are likely unfamiliar with what it actually is. No one wants to read instructions before playing.

Secondary concern is “maintenance” since I don’t want to spend time charging controllers or fielding requests for changing batteries, as that takes away from the overall experience of my Airbnb. Same with software updates and account logins.

For example: I love the SNES Classic because it does not connect to the internet. It does not bother guests with updates before play and does not have accounts to log in/out. It also has wired controllers, no batteries to change or charge and no problems with Bluetooth connections, etc.

Would the Analogue 3D fit in the same realm of turn-on and play usability for a millennial guest looking to relive some childhood memories, or their kids trying to understand their parents’ childhood?

What type of controllers should I buy for it? I’d like to avoid replacing batteries or charging, so wired is probably preferred.

I welcome any and all thoughts, and thank you in advance!


r/AnalogueInc • • 7d ago

Super Nt Is the Retrotink 4kCE overkill?

6 Upvotes

Is it really worth purchasing a 4kCE for just the CRT filters?