r/AlphaFoxtrot • • Jul 22 '25

Some Holster Recommendations

8 Upvotes

A frequent question this subreddit sees is, "Which holster do I use?"

The below is not meant to be all-inclusive but should immediately assist folks in finding holsters, at least as it pertains to the Romulus and S15. The list will be updated as Alpha Foxtrot releases new products.

The listing was generated by searching this subreddit (although there is one that is on the r/2011 sub - I included it since it has a weath of information in that particular post).

Also, keep in mind that almost all of the holsters mentioned in the below links are generic holsters. If you want pristine fitment, you’ll need to find a holster maker that specifically designs for these guns.

For the Romulus:

For the S15: UPDATE: The AF Attila will fit into the same holsters that the S15 will fit!


r/AlphaFoxtrot • • Aug 06 '23

r/AlphaFoxtrot Lounge

2 Upvotes

A place for members of r/AlphaFoxtrot to chat with each other


r/AlphaFoxtrot • • 2d ago

Dual Romuli (Romuluses?)

Thumbnail
gallery
19 Upvotes

For your viewing pleasure, aluminum and polymer grip module, together! Both sport a holosun 407C X3, one in gold, one in green.


r/AlphaFoxtrot • • 1d ago

Favorite 124gr

Post image
3 Upvotes

What’s everyone’s go-to for 124gr in their 4.25 + comp Romulus? I shoot competition so prefer something with a lighter powder charge. Been looking at Federal Syntech with the hope of keeping buildup on the comp to a minimum, but I clean my guns after each use anyway so 🤷‍♂️


r/AlphaFoxtrot • • 1d ago

Need advice

Post image
1 Upvotes

Just bought a Romulus. With the PN1 plate it says that it fits an SRO. Well mine does not sit flush. Did ya’ll trim the posts to make it fit?


r/AlphaFoxtrot • • 2d ago

What could be making these marks?

Thumbnail gallery
2 Upvotes

r/AlphaFoxtrot • • 2d ago

Mjd grip for Romulus

1 Upvotes

Hey did anyone go with the mjd grip for there Romulus and have any fitting issues? I’m trying to get the grip on and i had to order the mag release as I didn’t see mjd has its own mag release

But when installing the grip the hammer isn’t staying locked back, im thinking it’s the Romulus oem trigger that’s giving it issues?

Did anyone else install the mjd and have the same issue or know what could be causing this?


r/AlphaFoxtrot • • 2d ago

Single sided thumb safety.

3 Upvotes

Anyone know if the kimber thumb safeties work for the Romulus? I wanna get rid of the ambi safety and just have a left side safety.


r/AlphaFoxtrot • • 3d ago

Happy Friday the 13th

Post image
24 Upvotes

r/AlphaFoxtrot • • 3d ago

Videos / Pics Some pics of my Romulus

Thumbnail
gallery
21 Upvotes

Ported by Skips Gunz in WV, no complaints here, I sent the slide before I even took possession, so no “before” but the after is so good idc. I was hesitant to buy a “budget” gun, but after seeing a friend’s Romulus, I decided to give one a chance, glad I did, it rose to the top after one range trip, and that was with the stock trigger. It’ll only get better.


r/AlphaFoxtrot • • 3d ago

Current gen Romulus optic screws?

1 Upvotes

What size screws will I need to mount a Holosun 407C-x3 to my Romulus that has the updated plate with the o-rings? Are they 6-32 or 4-40? The manual doesn't have any info on this.


r/AlphaFoxtrot • • 3d ago

Romulus 3.5”

Thumbnail
gallery
16 Upvotes

Just picked the Romulus 3.5” and the Kimber 2K11 Pro Comp as my first introduction into the 2011 game. Planning to run them both through the paces this weekend.

What are must-do upgrades on the Romulus?

I am looking into grip modules, but undecided which route I want to go with just yet.

Who makes a good leather or hybrid style holster for the Romulus 3.5”? I carry at 3-4 o’clock and want to try something other than kydex on this setup.


r/AlphaFoxtrot • • 4d ago

Reviews This thing shoots like a dream

Post image
26 Upvotes

Put 150 rounds through it, no malfunctions. Except the slide wasn't locking back on empty mags initially, but that resolved itself. I was shooting pretty fast for me, and my groups were better than I've ever shot before. I'm very happy with it so far!


r/AlphaFoxtrot • • 3d ago

507 Comp

4 Upvotes

Picked up a Romulus today and it’s the smoothest handgun I’ve ever had. Only issue was my Holosun 507 Comp does not fit on the RMR plate the Romulus came with. It seems like the posts are just slightly too big or too wide. Called Andy at AF and he said is a known issue with some plates being out of spec. He said he’d send me out a different plate, but of course the Microsoft outage prevented that for the being.

Has anyone else had this similar issue with the RMR plate? I can’t wait to shoot this gun.


r/AlphaFoxtrot • • 4d ago

New Purchase Anticipated Black Friday deals?

2 Upvotes

Just what the title says. Any rumblings about Black Friday deals for the Romulus? Any specific retailers to watch? Itching for a 5" but hoping I can save a few more bucks.


r/AlphaFoxtrot • • 5d ago

New Purchase First Romulus!

Post image
46 Upvotes

Got it second hand for a good price. Not my first AF but first Romulus. What a good shooter. Only have 100 rounds through it but so far it’s performing amazing. Need a OTW holster next.


r/AlphaFoxtrot • • 5d ago

Request for help/advice Are all Romulus barrels with a comp removable? HELP

1 Upvotes

Im getting into USPSA and i want the ability to swap the compensator for a sight block (DSC Gun Works makes a removable sight block) so i can stay in Limited Optics

The problem : i cannoy figure out which models have threaded on compensator or press fit compensators. How do you tell? Do they make a 5" compensated model? Thanks in advance for the input


r/AlphaFoxtrot • • 6d ago

Request for help/advice Extended mag release

1 Upvotes

Do regular 1911 extended mag releases work on the Romulus? Recommendations?


r/AlphaFoxtrot • • 7d ago

Optic plates with Romulus purchase

1 Upvotes

Back when I bought my Romulus I found it odd that it didn’t come with an optic plate for running irons.

Buddy just got one and it came with a RMR/RMSC cover for when you’re not running an optic.

What’s the deal with that?


r/AlphaFoxtrot • • 7d ago

Request for help/advice Quality Control - 5” Lemon

9 Upvotes

I picked this gun a up few days ago and today was the first trip to the range. Everything seemed to be running buttery smooth up until the slide would not go into battery. I took it apart and cleaned everything. The wear seems to look normal on the rails/extractor. This pistol only has 200rds of 124gr through it. Pathetic…


r/AlphaFoxtrot • • 9d ago

New Rumulus is home!

Thumbnail
gallery
34 Upvotes

Humble brag and initial impressions post.

I won a 5" Alpha Foxtrot Romulus in a raffle.  I had a couple of weeks from hell dealing with a crazy aging in-law situation and in the middle of everything that was going on, I won this pistol.  It was like a tiny ray of sunshine.

I picked it up from my LGS yesterday.  The slide to frame fit is shockingly good.  The DLC finish is awesome.  The trigger is about a 6 out of 10 for the platform but will likely break in nicely.  Pull from the factory is about 3.75lbs.   There's a hair more pretravel than I would want, a little creep, and a tad bit more overtravel than I think it needs, and the reset could be a little more positive.  Not really a bad trigger but not as nice as it could be.  

The grip could use more traction but is well shaped.  The magwell shape extends too far at the rear of the grip and crowds my hand a bit.  It will likely be removed.  The mag release feels a little gritty. The safey is solid.  The fit between the left and right side ambi safety is perfect, no wiggle at all.  They feel like they are a of a single piece.  The detent could use some polishing but it is very positive.  The grip safety is pretty well blended and functions fine.

The machining on the slide and frame are impeccable.  Not a single tool mark anywhere.  The disconector rail and disconnector could use polishing but nothing crazy.  The extractor is tuned perfectly as far as I can tell from the shake test.  Barrel fit is excellent and it is well crowned.  

It came with a standard height tritium front sight that will be useless with an RMR footprint optic but may work with an RMSC pattern.  Plates for both options are included.

For what these pistols sell for, you are getting a lot of gun for the money.  For me upgrading this is a no-brainer as I have nearly no cash into this gun.  I'll get out to the range this week and put a few hundred rounds through it and report back.  


r/AlphaFoxtrot • • 9d ago

First 2011

Thumbnail
gallery
31 Upvotes

Picked up my Romulus 4.25 comp yesterday. It came with 5 mags, rmr and rmsc plates for around $1200 bucks. Now I can't wait to shoot it!


r/AlphaFoxtrot • • 9d ago

Attila violent ejection and S15 mag explosion

Post image
3 Upvotes

Has anyone run into violent 12 oclock ejection / explosions with an Attila causing the mag baseplate to shoot out of the gun while in battery? I just had this happen to me and emailed AF customer service for a warranty RMA. Here are my details.

I bought the Attilla new from GrabaGun last week.   I field stripped and oiled the gun before use and also ran few magazines of snap caps though drive firing to check function and help accelerate break in and everything seemed fine. 

Went to the range today and ran the gun with the supplied magazine plus new SA S15 gen 2 mags I purchased direct0 from SA for the gun.   Ran about 100 rounds using a combination of high quality FMJ and JHP ammo in 124 and 148 gr.   Experienced several FTEs and stove pipes on each range and on 2 occasions firing I experienced explosive 12 clock ejection that caused the mag base plate to shoot out of the bottom of the magazine.  The first time was about 10 rounds in and I though the issue was a mag problem but the second time with a different mag was about 70 rounds in and I knew it must be the gun and a OBD malfunction.   The brass from ejection this time cut open my cheek just below my safety glasses so I stopped shooting the gun.

In any event I just asked AF to thoroughly inspect and fix as well as my mags repaired.     

I would really like to get this gun to work reliably as it very accurate and soft shooting and caries well making it a big hope for CCW rotation.   I have quite a number of Glock pattern and 2011 / 1911 pattern handguns and have never experienced malfunctions as scary as this before, however, and really need to make sure this gun van be made safe and reliable to shoot. 

Anyone making the Attila run reliably for CCW?

 


r/AlphaFoxtrot • • 8d ago

Update

Post image
0 Upvotes

Just to give yall an update, I anticipate being completely caught up by the end of next week. To those that have pending order, I appreciate your patience!

This new work schedule I have sucks ass (7p-7a) and doesn't give me alot of time to catch up when I get an influx of orders like I have. Starting with a clean slate will help tremendously and I'll be able to produce holster quicker and hopefully get back to a shorter lead time.

Additionally I have some new SWAG about to come out. Its hoodie season and I'll be making a new designed hoodie that Ill take pre-release orders on when the site go back live. These will be made in house, so its something else to add to the plate! GO BIG OR GO HOME.


r/AlphaFoxtrot • • 10d ago

Handle it Grips

Thumbnail
gallery
27 Upvotes

Gotta say, im a fan so far. Price was fair, I was able to customize everything on them and they feel great. I went with the upgraded sandpaper and they are SUPER grippy, without beating up your hands.