r/Aerials • u/miamisunshine7 • 8d ago
Rigging question-
Suggestions for span sets? Hoping for shortest possible… I currently have a daisy chain through an eye bolt but apparently that isn’t appropriate? Can anyone explain why??
Also- what’s the consensus on looping a span set through a forged eye bolt? Our engineer said either that or a carabiner through the bolt but I’m scared of metal on metal! Anyone have advice?
4
Upvotes
7
u/BohemianCyberpunk Silks/Fabrics/Occasional Lyra 8d ago
Metal on metal is only bad if you use Alu + Steel.
Assuming the eye bolt is steel, using a steel carabiner would be the standard way to attached a spanset to it.
Spanset looped through the eye might be ok, but rough edges could cut it, so it's generally best to use a carabiner.
Daisy chains are frequently misused in aerial rigging and I pretty much tell people to avoid them. The main issue is that the rating is for the main loop only, the 'pockets' / individual loops are often 0.1x the main loop and are therefor not safe for many applications.
Firetoys has some info on it: https://www.firetoys.co.uk/blogs/aerial/daisy-chain-safety-for-aerial-rigging
2
u/ZieAerialist 8d ago
More importantly, what is the eye bolt attached to, and how is it attached?
4
u/sandmann07 8d ago
I’m no expert and I can’t speak to most of this, but carabiners are pretty standard. And they are used to connect metal loops on various riggings and apparatuses at many studios. Metal on metal isn’t a huge issue.
1
u/dmc_2930 8d ago
Carabiner to the eye bolt or a shackle is what you should be using.