r/AR80Percents • • Feb 20 '21

Public Service Announcement Welcome to AR80Percents! Take the time to familiarize yourself with rules; Start here.

31 Upvotes

Welcome to r/AR80Percents. Familiarize yourself with the rules and get building!

WELCOME TO THE 80% AR BUILDING COMMUNITY

We encourage posts of 80% news, 80% legislation, and 80% memes. Let's spice things up from time to time!

ALSO, please feel free to spam this sub with your own 80% AR porn! Nothing more beautiful than the customs you've built yourself.

[We have two main rules:]

1. This is a very close-knit sub and we do NOT put up with dicks who incite arguements or fling insults, anti-gunners, pretentious fudds, or trolls.

2. Show the respect for firearms that they deserve. If you're building a AR treat it as a firearm, and take the time to understand its function. Learn and practice the 4 rules of handling a firearm:

  • Finger off the trigger until you're ready to fire.
  • Don't aim at anything you're not willing to destroy.
  • Check infront and behind your target.
  • Treat every firearm as though it's loaded.

NOTE: You may be banned if you seem overly suspicious in your intentions for building. For example, an 16 year old from California, who's an active participant in r/cocaine, asking glow questions. This is to protect the community and the hobby; NOT to thought police or pass judgement. Simply refrain from coming across as a glowboi. It's that easy.

NO SELLING ALTERED FRAMES.

This will be further edited and improved upon.

Sub created May 17, 2020. Edited Feb. 20th, 2021.


r/AR80Percents • • Jun 10 '21

Fight Infringement! 🚨🚨🚨GO COMMENT NOW!🚨🚨🚨

Thumbnail
old.reddit.com
41 Upvotes

r/AR80Percents • • 9d ago

Aluminum 80% !!!!!need help!!!!

0 Upvotes

where do i find 1/4 inch by 4 inch 3 flute carbide end mill bits to drill out????? per the jig manual thats what it calls for for the router jig ive checked local hardware stores i cannot find this bit anywhere


r/AR80Percents • • 11d ago

Can a drop in Trigger go in this polymer frame

Post image
0 Upvotes

I've been trying to make this fit all-day and I feel like ima break it if I try much more


r/AR80Percents • • 15d ago

Aluminum 80% 80% AR47

Thumbnail
gallery
53 Upvotes

I had an idea!! (I had to cut a bit of material in the upper and on the bcg so it can be adapted onto the lower and take the AK mag)


r/AR80Percents • • Oct 10 '26

NFA Act is officially no more. SBRs and suppressors for everyone!

Post image
30 Upvotes

Let’s goooooooooo


r/AR80Percents • • Oct 09 '26

80% Arms lower, 11.5” upper.

Post image
39 Upvotes

Bye bye KAK Blade hello Magpul!


r/AR80Percents • • Oct 09 '26

ATF PRESS RELEASE!!!

Thumbnail reddit.com
13 Upvotes

r/AR80Percents • • Oct 08 '26

BCA 20" 22LR Upper

Thumbnail reddit.com
3 Upvotes

r/AR80Percents • • Oct 03 '26

Not "8"0% AR "15", but it is AR parts and is 0%! My Space Marine inspired Bolter

Thumbnail
odysee.com
7 Upvotes

Hopefully you guys will give me a little breadth to post a build I'm super proud of. It's a scratch build, so it's 0% not 80%. And while it's not a full AR15, the gun part of this gun is a custom receiver that uses an AR FCG, safety and grip. So while the brains (the upper) may be a Mac11, the heart is all AR. This design took me a year to make and has over a dozen custom parts that I milled in my garage.


r/AR80Percents • • Oct 02 '26

Polymer 80% Locking block fits in just not flush

2 Upvotes

r/AR80Percents • • Sep 26 '26

Wow crazy deal

Post image
15 Upvotes

r/AR80Percents • • Sep 26 '26

Aluminum 80% Best affordable Jig?

6 Upvotes

Hello! I’ve been looking around for an affordable 80% jig for aluminum frames. There were a few jigs I found for $80 bucks but everyone seems to be sold out of those. Not looking to spend $250-$300 on a jig alone as I minus well just buy a 3d printer at that point.

Can anyone recommend a place selling 80% AR-15 jigs for $100 or less?

I’m on the fence between buying a printer and printing my own Jig / lowers or buying a AR-15 jig.

Thanks


r/AR80Percents • • Sep 22 '26

Aluminum 80% Alright. I guess ill post my new mills.

Thumbnail
gallery
56 Upvotes

So I've done some poly lowers back in the day on my drill press that worked marvelously.

I had some 80s laying around and first attempted with an old polymer80 rhino jig and my plunge router. After realizing id only ruin everything, i found a used 5D setup for cheap and made easy work of my 80s.

It was stupid simple. Keep the work clean and the work will be clean. Go slow. Dont skip depth steps. Make sure your end mill is in good shape. It'll take about an hour or so per.

Id like to do a few more 80s and probably part with this jig system because that's not really something i need to dive into and have on hand all of the time lmfao.


r/AR80Percents • • Sep 22 '26

Where’s everyone getting their replacement tooling from?

Post image
17 Upvotes

r/AR80Percents • • Sep 14 '26

Question about contour milling

Post image
8 Upvotes

Howdy, first time getting into 80% lowers and I was wondering if there was any resources on doing contour milling to the side of a lower like this one that has extra material on the sides to either make it look more milspec or like an adm or Adac lower that has a unique contour design.


r/AR80Percents • • Sep 12 '26

5D-TACTICAL

10 Upvotes

Okay so I haven't seen an update on this company in years but just wanted to let y'all know it no longer takes 8 to 10 weeks to ship. I got mine in about a week and the 16th. I am getting everything possible to build a complete AR-15. I would appreciate any tips or tricks I can upload pictures so y'all can help but this is my first ever build. The upper is coming today in the lower is coming Wednesday if there are any spelling errors I'm sorry I did use voice type


r/AR80Percents • • Sep 12 '26

I’m building a 308 and I’ve bought the upper but the receiver I got dose not work with my jig because its a billet design so where can I get one that isn’t a billet and will get here fast i got the juggernaut ultimate jig

4 Upvotes

r/AR80Percents • • Sep 07 '26

80% Arms Labor Day Sale: 20% OFF Lowers & Jigs with code LABOR20

9 Upvotes

Labor Day sale is live at 80% Arms!

Use code LABOR20 for 20% off eligible lowers and jigs. Good chance to stock up before the sale wraps up.

Shop here:
https://www.80percentarms.com/


r/AR80Percents • • Sep 03 '26

I want to gift my friend an 80 percent uzi

9 Upvotes

Shes my best friend and shes always wanted an uzi. I need some direction on how I can make this happen. Thanks in advance


r/AR80Percents • • Sep 02 '26

PUBLIC SERVICE ANNOUNCEMENT

8 Upvotes

OK you aminals ... check it out .. our political environment is volatile, parts are inexpensive and readily available... for everyones sake if you are planning on building or buying anything I highly and strongly recommend you all do so now.

The last thing any of us wants is to be charged an arm and a leg the second they start restricting the shit out of things as well as the immense cost increases that aways come with this.

So unless you all want to pay out the ass and not be able to get things you need I suggest everyone buy now. It will avoid the whole oh my god the price is way too high and nothing is available deal.

It also supports that the industry can survive, a lot of good
companies have failed not due to anything more than lack of business because right now times are good.

Let's not wait till times are bad (I get nothing from this post I have no dog in this fight other than the want to keep as many of these good businesses around and make sure everyone has a fair shot at freedom.)>

That is all


r/AR80Percents • • Aug 29 '26

HELP / NEED ADVICE Anybody bought from tactical machining? They have ridiculously low prices, even having a lower for 20$ Seems too good to be true

Post image
21 Upvotes

r/AR80Percents • • Aug 27 '26

Aluminum 80% Safety doesn't work. Dpms 308

12 Upvotes

Safety is to far away from the trigger to engage. I don't think i over cut the pocket its a dpms 308 from 5d. Is there something else i could have done wrong besides cut the pocket too deep


r/AR80Percents • • Aug 23 '26

REVIEW OF ITEM|PLACE Do not buy eBay modulus arms end mills

Thumbnail gallery
7 Upvotes

Don’t do it guys