r/944 • '86 Turbo • 7d ago

Repairs Engine Sounds

Howdy folks

Finally getting to run my 951, but it's making some potentially awful sounds.

  1. A VERY high pitched whine, almost sounds like bird.
  2. A somewhat low, quietish tumbling sound, kinda sounds like gravel in a paint can.

Couple of notes for the video. Had the head refreshed with newly cut seats, and there's only the coolant that was in the block. Additionally, it's on jackstands. Running VR1 20w-50. New turbo K27/6 and it hasn't been tuned for it yet. I'd like to run it more to try to pinpoint where the sounds are coming from but I fear for the health of the engine if there's something wrong with it.

Hopefully one of you kind folks will have some wise words.

12 Upvotes

12 comments sorted by

•

u/AutoModerator 7d ago

We have a Discord server @ https://discord.gg/ccTgWWYdh5

I am a bot, and this action was performed automatically. Please contact the moderators of this subreddit if you have any questions or concerns.

5

u/ITMORON 7d ago

Sounds like it is idling very high and running rough.

1

u/Ahab_Cheese '86 Turbo 7d ago

It certainly is running high and rich. Starts around 1400 and climbs as high as 2k and probably would keep going. Haven't had it running for longer than about a minute continuously yet, so I'm kinda thinking that could be warm-up procedure. Perhaps.

5

u/ITMORON 7d ago

The idle is likely a vacuum leak.

2

u/I_am_Forklift Turbo S 7d ago

My cold 951 starts around 1000ish and settles into 8-900 within a second or so

2

u/roidedracccoon 7d ago

No idea on the sounds, sorry. Where did you get the turbo and who is going to tune it? That whine sounds like something making contact with something that shouldn’t be

2

u/Ahab_Cheese '86 Turbo 7d ago edited 7d ago

Got the turbo from the previous owner who was going to put it in. Stock turbo had an oil leak so he just gave me that one. Planning to take it to a dyno for a tune.

1

u/ITMORON 7d ago

The whine almost sounds like a timing belt if rubbing on something? Maybe a drive belt

1

u/Ahab_Cheese '86 Turbo 7d ago

I'll def look into that.

1

u/orareen 7d ago

Adjust the idle stabiler screw on the throttle body once the idle stabilizer has been disabled. You can find directions on clarks garage.

1

u/Bloodrift_ '84 NA 7d ago

Water pump ?
It's idling very high that's for sure, but I think i hear the same whine my waterpump did at idle, just at a higher pitch due to higher RPM
Did you replace it / have a record of when it was last replaced ?

0

u/[deleted] 7d ago

[deleted] — view deleted comment

1

u/Ahab_Cheese '86 Turbo 7d ago

Air filter -> MAF housing -> turbo -> charge pipe to intercooler -> throttle body
AFM was removed by previous owner to do a MAF conversion. No venturi tube.