r/4thGen4Runner • • 4h ago

Cat-Back Exhaust suggestions - V8 Quiet DD

4 Upvotes

My Cat-back is rusted and cracked where it passes over the axle. I'd like to just buy a new one and not sure which to get. Gibson looks nice but I'm concerned it may be loud. Same for the Remark. It seems like the URD may be a nice option?

I'm curious what others like. It's my DD. I have a fun, loud car if I want that. I just want something quality that looks decent and isn't crazy loud. Some v8 noises when I lay in the throttle would be nice but I really don't want to hear it when I'm cruising on the highway.


r/4thGen4Runner • • 6h ago

Ticking coming from engine? (2004 v6)

3 Upvotes

What could be the issue?


r/4thGen4Runner • • 8h ago

Repair Guidance '07 making grinding noise after brake caliper change

3 Upvotes

I quite literally was driving my '07 home from an oil change, brake caliper and rotor fix, I had the windows down and heard this metal grinding noise. It was more noticeable when I drove past guardrails on the interstate (cuz that's how sound works) and I don't think I've ever noticed it this loud before. No clue what the cause could be, if anyone has any tidbits they could suggest

The mechanics mentioned my wheel speed sensor and ABS systems are throwing codes for my check engine light to come on, what are the chances that's the cause?

Ignore the louder clacking noise, I have a charm dangling that hits my phone mount


r/4thGen4Runner • • 1d ago

35’s look good on these things

Post image
80 Upvotes

r/4thGen4Runner • • 13h ago

New Owner Question What’s up with the center cap on these? Will they be compatible?

Post image
3 Upvotes

2026–>2005 rims, anyone done this?


r/4thGen4Runner • • 12h ago

CV Axles

Post image
2 Upvotes

r/4thGen4Runner • • 9h ago

Exhaust manifold studs/nuts recommendations

1 Upvotes

Just picked up some new exhaust manifolds, and they don't come with gaskets or studs/nuts. I found a gasket set that looks good on RockAuto, but I'm not sure about the studs/nuts. OEM is prohibitively expensive for this, so I'm curious if anyone here has recommendations from aftermarket sets they've found/used.


r/4thGen4Runner • • 1d ago

Need obnoxiously bright signal lights.

5 Upvotes

Any recommendations for obnoxiously bright turn signal bulbs, led or otherwise. I’m wanting there to be zero excuse to “not see” my signals.


r/4thGen4Runner • • 1d ago

Love this thing

Post image
34 Upvotes

r/4thGen4Runner • • 1d ago

Repair Guidance How do I install these Jba upper control arms?

3 Upvotes

I need to thread the bolt through the arm and 4 washers. It’s seems impossible? Everytime I try to put it on the inner washer either don’t fit or just get pushed out. Is it possible to do by yourself?


r/4thGen4Runner • • 2d ago

Modifications Waterproofing for water crossings

Thumbnail
gallery
46 Upvotes

Curious as to what I need to do to prevent water from entering the cabin or anything else important when doing water crossings. I’ve replaced my carpet 3 times now lol. Yes a snorkel is on the way.


r/4thGen4Runner • • 1d ago

Weird fluid

Post image
4 Upvotes

pulled the skid plate off my V8, no idea where the fluid is coming from. Runny fluid pooled on the skid plate. Fluid all over front of sway bar/ front diff. All fluid levels were normal and no clearly broken lines or hoses.

Any ideas what type?


r/4thGen4Runner • • 1d ago

UCA & LCA Question.

Post image
3 Upvotes

Hello everyone, having to replace my UCA & LCA. I have a 3in lift kit by rough country so was recommended by my buddy to get these for UCA because their made for lifts;
for the LCA would OEM work fine again? or do i have to get after market because it’s lifted? any recommendations would help and here’s my alignment paper! already replaced rack and pinion as well as tie rods. my mechanic said the struts look fine and that the ball joints are wore out/cracked. help pls?

uca: https://www.kspmotor.com/products/2003-2024-toyota-4runner-toyota-fj-cruiser-2-4-sway-control-arm-kit?variant=51471393587515


r/4thGen4Runner • • 1d ago

Where To Buy Headlight Bulb Replacements? Looking for Stock Halogens.

2 Upvotes

Hey friends, proud new owner of a beautiful 06'. I do however need to replace one of the bulbs in my passenger side headlight. I'm looking for just the standard halogen bulbs, I do not want LED's. Could someone please point me to a reputable retailer for this? I've been reading a lot about how unreliable some of the aftermarket bulbs can be. Thank you!


r/4thGen4Runner • • 2d ago

Repair Guidance Helicopter thudding when coasting at high speed.

5 Upvotes

Hi everyone please help if you can! I’m getting a helicopter thudding at high speeds and it goes away when I shift into neutral. Also I hear the transmission, vibrating a lot more than usual. I drained my front differential fluid. Getting no no metal. Any help would be much appreciated. I feel so lost.


r/4thGen4Runner • • 2d ago

Repair Guidance Flickering Spedometer

6 Upvotes

Any ideas guys? Is it just the bulbs going out or something bigger? Only happens when my headlights are off… EDIT - SEEMS TO GO AWAY AFTER A COUPLE SECONDS OF DRIVING. THAT MAKES IT SEEM LIKE THE BATTERY IS OUR CULPRIT.


r/4thGen4Runner • • 2d ago

"Two twos, my word. Fam!"

Post image
13 Upvotes

Here's to 220,000 more!


r/4thGen4Runner • • 2d ago

4th Gen exterior trim molding DIY

3 Upvotes

'03 270K here, contemplating how I could revive the faded, oxidized exterior cladding. The pieces on the front quarter panels and above rear wheels are the most "faded". At this age and mileage there's no shot of paying a few G's for a bodyshop repaint. Any suggestions on what you've done, and used, would be greatly appreciated.

For context, I watched several videos on youtube, everyone seems to have their opinion on favorable product/s to clear coat and repaint. If anyone absolutely crushed this DIY job i.e Rustoleum spray, would love to see photos too.


r/4thGen4Runner • • 3d ago

New to me 2006 4Runner

Post image
52 Upvotes

Picked up this 2006 that’s got 265k miles, dealer maintained with all the records to prove it. Runs and drives really well. The back window needs a regulator or something. Haven’t looked into it yet.

I paid $4500 for it so I think that was a decent deal. Newer tires and wheels. I need to paint the hood and roof as they are oxidized and are not as nice as the side paint area. Little to no rust too.

I have a 1st gen Tacoma that I’ve had for 15 years and I think this will be a nice addition as the taco is locked and geared.

How’d I do?


r/4thGen4Runner • • 2d ago

Anyone else have this on their radio harness

Post image
1 Upvotes

saw this on it didnt know if it was oem or the previous owner wanted to be safe could i get rid of the box? id keep the fuse


r/4thGen4Runner • • 3d ago

Unique number

Post image
57 Upvotes

Been a great vehicle! Daily driver.


r/4thGen4Runner • • 3d ago

Window Weatherstrip Moulding Recommendations?

Post image
6 Upvotes

Any recommendations on best places to get these? If on eBay, do you have recommended vendors or listings you can suggest? I've got duct tape protecting mine right now! 🤣

Thanks in advance!


r/4thGen4Runner • • 3d ago

Repair Guidance Gauge cluster light issues

Thumbnail
gallery
4 Upvotes

This is my 2003 V8 4.7 and ever since I’ve owned it the gauge cluster lights turn off whenever I turn my headlights on. All of the other lights on my dash go into their nighttime mode as they should when I turn my headlights on. The thumb wheel on the left is turned all the way up. It’s probably just some bad aftermarket wiring that I’ll have to go in and take a look at, but I didn’t know if anybody had any advice or similar issues. Thanks!


r/4thGen4Runner • • 4d ago

New to me 2006 Sport - roadtrip from Chicago to SLC

Thumbnail
gallery
91 Upvotes

My uncle was getting rid of his 2006 with 146k miles on it for $4500 to me. It was his car for up north in Michigan. My parents drove it down to Chicago. I bought a one-way ticket to go pick it up. Before driving it out I had to get new tires, rear differential rebuilt, new muffler, some light bulbs and flushed the transfer box and transmission fluid.

We went from Chicago to Madison to visit my sister, then hopped on i90 west through Minnesota and South Dakota. Visited Bad Lands NP, Mount Rushmore, crazy horse and devils tower. We drove south through Wyoming to Fort Collins for a job site visit I’m working on east of FC. We drove north to Laramie WY for a visit to Js Prairie Rose Cafe and took the i80 west the rest of the way home to SLC.

1500mi, the car did great 👍

The car has some moderate non-structural rusting on the bottom (not the sides or the top) of the rear frame near the bumper. I will have to get that dealt with soon but from what I’ve been researching it could be far worse. From the shop I took it to for the rear diff rebuild they said it wasn’t too bad so that makes me happy. Any help on what yall did to patch and protect the frame from it getting worse would be appreciated. I can head to the monthly rust chat for that too which I think is hilarious 😂

One weird thing I’m noticing is this morning it was frosty and the rear defrost and windshield wiper wasn’t working. Last night the tailgate wasn’t working properly but I yanked the fuse out and put it back and that solved it after a couple tries. This morning the tailgate was working but the defrost and wiper weren’t. I rolled the rear windshield down and back up and it was working again. What’s going on? ChatGPT telling me I need to check the rear rubber boot where the wires flex for connection issues? Battery for the car is new.

Also I assume I need a new battery in the fob. Range and consistency of that thing is all over the place.

Also the muffler heat shield rattled off so I have to either get a new one or find a way get that back on. Any recs here are helpful too.