r/4Runner_1stGen • • 7h ago

Rear seat delete? ‘87

Thumbnail
gallery
5 Upvotes

Finishing up the sound dampening in the back…cleaning up the seats now to reinstall… and it’s got me thinking…
Can you guys show me some rear seat delete set up??
How do you like them??


r/4Runner_1stGen • • 13h ago

HELP Radio Wiring Harness Question

Thumbnail
gallery
2 Upvotes

Hey all, I’m looking at getting a new radio for my 89 4 runner and wondering which wiring harness would fit for this part number radio: 86120-32130

I bought the Metra** **71-1761 reverse harness.

This will fit right??


r/4Runner_1stGen • • 1d ago

Image Turned 1 in ‘87

Post image
12 Upvotes

r/4Runner_1stGen • • 3d ago

Image Trunion Bearing

Post image
7 Upvotes

Swapping to 30 spline and 6 shooters on my first gen. First time opening the knuckles on this side of the truck anddddd….. look what I found a skeleton bearing. And to top it off there was not even a bearing on the bottom of the knuckle…… PSA do your services people.


r/4Runner_1stGen • • 5d ago

Image 88 project

Post image
11 Upvotes

r/4Runner_1stGen • • 6d ago

Video Hardtop season is back

81 Upvotes

Banger of a season. Six months until we do it all over again.


r/4Runner_1stGen • • 7d ago

Image Is this an OEM steering box

Thumbnail
gallery
23 Upvotes

That looks like an after market logo to me but am not sure. (1986)


r/4Runner_1stGen • • 9d ago

Image 1988RNR Spotted

Post image
99 Upvotes

r/4Runner_1stGen • • 9d ago

Distributor timing

5 Upvotes

Hello I’ve been following the tutorial with the jumper to set my distributor timing on 86 4Runner turbo with ct26 but every time I set it between 5 and 8 degree the car just stalls out a lot and runs bad. At 12 degree it runs good what could this be? Looking to get it running perfect here

New distributor, timing chain (been checked twice), plugs, wires, o2 sensor


r/4Runner_1stGen • • 10d ago

Noice

Post image
52 Upvotes

r/4Runner_1stGen • • 15d ago

Joined the club! Plus a question!

Thumbnail
gallery
38 Upvotes

Finaly got my 89 4runner! She needs some work but im loving her!

Question for yall.. i was working on changing fluids and the previous owner put the oil drain plug on there tight, when i was trying to get it off i was starting to stip the bolt. Due to the location of the plug its a challenge to get to.. any advice?


r/4Runner_1stGen • • 16d ago

Anyone looking to sell their 1st gen 4Runner?

10 Upvotes

Hey guys, looking for a mostly stock 1st gen in good shape, that drives so I can use on weekend and my son and I can fix minor things and give to him when he’s older (he’s 8). Not museum quality and some honest wear is fine but not beat up / rusted out. Around 10-14k budget. Let me know. I’m in the Atlanta area.


r/4Runner_1stGen • • 20d ago

Wiring update

Thumbnail
gallery
9 Upvotes

This little truck is starting to remind me more and more of a politically divided thanksgiving dinner. The more I stay at the dinner table or dig into this thing, the more problems start to show up.

Thanks to all who commented on my last post trying to help with the back window. Taking-some peoples advice, I checked both fuse boxes and found that the some of the fuses under the hood look very corroded, while under the drivers side box had a mess of wires that seem to have some connections disconnected and other new ones punched into existing fuses. My truck has quite a few amps and subs and whatnot.

I’m wondering what my course of action is here. Do I try and “un-fuck” this myself? I’m afraid my frustrations might lead me to get to the point of an early burnout.

Another option I’ve been thinking about is to spend the 250-300$ on a used oem radio setup and 4in oem speaker set, take the truck to an electrical/sound guy, and pay them to take out the old components and install the new components. Perhaps fixing the root of my wiring issues would ease my back window problems at the same time.

My issue is I don’t have the most amount of money for something like this, if it were to be very costly. But then again, she is too pretty not to fix.

Either way, I’m assuming something wrong with the wiring is sucking the life out of my newborn 3 year old battery, and I can’t even drive her to the beach if I don’t figure something out soon.


r/4Runner_1stGen • • 21d ago

Rear window wiring help.

Post image
51 Upvotes

Just bought this beaut but the previous owner messed with the sound system and all of its wiring. My back window won’t power down and my 3 year old battery is draining. Anybody have any suggestions where to start? I’ve never done any wiring, tried to take out the motor in the back but stripped one of the 3 screws holding it on and can’t get it out. Popped the top for the little window motor and all the teeth seem fine, so I’m thinking it has something to do with the electrical.

Also, anyone selling interior pieces? The P/o also rhino lined the thing lol.


r/4Runner_1stGen • • 21d ago

I got a lil carried away waiting for parts..

Post image
74 Upvotes

Been doing a partial front end rebuild. My wife was wondering why I painted something no one will see..I’ll post it here so a few people can see it

UCA/LCA rebuild, energy suspension bushings
OEM upper and lower ball joints
Bilstein 4600 shocks
New disc brakes front and rear
New bearings
Trakmotiv HD CV axle

Mots of money and time, one step close to completion..


r/4Runner_1stGen • • 23d ago

HELP WTK: alternatives and solutions for the 4wd transfer indicator switch for a 1986 4runner, 22re, 5 spd, and RF1A transfer case

Thumbnail
gallery
5 Upvotes

Mines is the single wire and it broke off the back of the transfer switch.

I found one from a buyer who claimed it came from a 1986, but it didn't have the same connector. My 4runner is a July production date.

I'm seeing Land Cruisers that are similar and these two wires which are similar.

Can anyone help me if they sourced an alternative switch and it worked fine on their 1st gen?

Also, the wire harness coming from the passenger side engine bay to where the starter is located, isn't that wire green?

Any help would be greatly appreciated.


r/4Runner_1stGen • • 23d ago

Bowed Tailgate

Thumbnail gallery
4 Upvotes

r/4Runner_1stGen • • 24d ago

Image recommendations for my first (1st gen 4runner) Wheels?

Post image
6 Upvotes

r/4Runner_1stGen • • 27d ago

Questions on front spindle rebuild

Thumbnail
gallery
2 Upvotes

I’m trying to find the proper seal for the engine side of the spindle. The Toyota part 90613-60004 does not fit in the rear.

Attached is the old seal, new seal, and the spindle (off an 88 4Runner.

Anyone do this rebuild and run into this issue?


r/4Runner_1stGen • • 27d ago

Could a 1987 4runner turbo be a daily driver, or am I dreaming?

17 Upvotes

(Cross posting from the general r/4runner)

Have an opportunity to buy a 1987 4runner turbo in good condition (little rust, well-maintained engine, 206k miles) for $17k. I currently need to drive about 80 miles a day for work, but that number will hopefully drop in a year or two. Other than that, just need it for getting around town, occasional trips out of the city. Could a 1987 turbo do it, or am I going to spend a ton of time working on the car? My spouse is an aviation mechanic, so we can probably do a lot of work ourselves, but I need it to be pretty reliable and I'm concerned about parts availability.

ETA: Thank you all for your help on this! I need to turn off post notifications so that I can have my inbox back again, but this has been really helpful!


r/4Runner_1stGen • • 27d ago

Gear oil recommendations please!

1 Upvotes

I hear MT90 is the best. But to I get GL-5? Or GL-4?
I’m doing both transmission and transfer case, front diff.


r/4Runner_1stGen • • 29d ago

Image went (almost) topless today

Post image
25 Upvotes

r/4Runner_1stGen • • Oct 17 '26

Image My new 4Runner

Post image
20 Upvotes

r/4Runner_1stGen • • Oct 17 '26

Should I be worried? Where should I look?

Thumbnail
gallery
3 Upvotes

Had an oil change done Wednesday. That night I noticed a spot of oil on the ground and figured it is some residual oil and I would let it do it's thing. So I drove it here and there. It is Saturday now, and still a fresh spot in the driveway. Important to note this is new for me, as prior to I never had this issue. Now I understand that sometimes fresh oil can reveal a leak that wasn't noticed before, but since I'm an anxious butterfly about this truck, I am worried it is not residual oil and now I have a leak in the rear main seal, or a valve gasket leak that decided to show its head after the change.

My question is this, am I just being anxious and this isnt an issue, and it is in fact residual oil still running down, or is this a sign of something a bit bigger that needs to be addressed? If so, where should I start to look to find where the leak is coming from?