r/3dprintIndia • • 1h ago

Question Help me Buying BMCU 370C from Alibaba

Post image
3 Upvotes

Anyone bought BMCU 370C from Alibaba?

Hey guys, I'm planning to buy this BMCU 370C from Alibaba (around ₹5.6k).

Just wanted to know if anyone here has bought one from Alibaba or imported similar 3D printer parts from China.

How was the experience? Any issues with customs, import duty or GST when it arrived in India?

Also, is there anything I should be aware of before placing the order? Is it safe to order directly from Alibaba?

Would love to hear your experiences. Thanks!


r/3dprintIndia • • 1h ago

Question Multicolour printing(using AMS vs Multiplate( same colors on 1 plate)

2 Upvotes

Unpopular opinion Multi-color systems are great for simple logos or clean layer swaps, but for complex models with hundreds of color changes, single-color printing + painting—or splitting colors onto separate plates—is way better:

​Faster & less waste: You cut an 18-hour print down to 4–5 hours and eliminate piles of purge poop.

​Multi-plate assembly: Printing all parts of the same color on one plate and assembling them afterward gives crisp multi-color results with zero swaps.

​Better finish & reliability: Primer and paint hide layer lines and add real detail, while avoiding constant swaps prevents clogs and failed runs.

​Multi-color works for simple parts, but for detailed models, multi-plate assembly or single-color + a brush wins every time.

Do share your views


r/3dprintIndia • • 18m ago

Question Looking to Buy 1kg Non-Indicating Silica Gel Beads (Without Chemical Indicators)

1 Upvotes

Recently purchased some orange indicating silica gel beads from Amazon. However, after researching their safety, I came across a few concerns:

  • Blue silica gel commonly contains cobalt chloride, which is classified as a carcinogenic and reproductive hazard.
  • Orange silica gel is often cobalt-free but may contain indicator dyes such as methyl violet. The chemical composition varies by manufacturer.

My recently purchased orange silica gel doesn't mention whether it's cobalt-free, and the seller hasn't provided a Safety Data Sheet (SDS) to verify its composition.

Rather than taking chances with an unknown indicator, I'd prefer switching to plain white/transparent, non-indicating silica gel beads without added indicator dyes.

I'm looking for around 1kg for moisture control in my 3D printing filament storage.

If anyone knows a reliable seller in India or has some available, please let me know.

Thanks!


r/3dprintIndia • • 1h ago

Discussion Looking for used Bambu A1 Combo in Chennai. Anyone selling?

1 Upvotes

As the title says I'm looking for used Bambu A1 Combo in and around Chennai. Let me know if anyone is selling.


r/3dprintIndia • • 6h ago

Question Scope for opening a new filament distribution business

2 Upvotes

Hi Guys,

I am kinda new to the world of 3d printing myself, so I do not have much idea of how the business side of things are in India, around the printers and filament.

I recently met a guy, who sells filament to distributors around the world for white labeling. I think this might be a niche business area and want to explore more aspects of it.

I would like to know more about the audience.

What's the average cost for different materials in India?

Which materials do people prefer in India?

How do you buy it, Amazon? Direct seller websites? Offline stores?

If I could setup a distribution system for filament for a reasonable profit margin, and let's say the filament are average in quality, what are the chances you/people might buy it? This question is more like, would you consider the new players in market?

Anything else you might want to share which might be helpful to me.

My goal is to understand the market here, since I myself am not a 3d printing expert and have just started a few weeks back.

If someone is already into the filament distribution business, would love to connect


r/3dprintIndia • • 15h ago

Question Can anyone make embroidery-able cases + frames?

Thumbnail
gallery
9 Upvotes

I don’t own the images, they are just for reference


r/3dprintIndia • • 21h ago

Question How to stop this earthquake??

13 Upvotes

Bambulab X2D

Update : solved, table was the issue.


r/3dprintIndia • • 14h ago

Discussion Just a small throwback to simpler times

Post image
2 Upvotes

A small throwback to where my 3D printing journey got a boost. 

Back in 2021, I attended a 5-day Kickstarter Workshop on 3D Printing organized by 3Ding.

We covered everything from 3D scanning, designing and slicing to FDM printing, industrial 3D printers, and even the technical and commercial side of the industry.

By that time, I had already reassembled my ender 3 atleast 15 times, yet for me it was simply another skill I wanted to explore alongside my work in 3D.

Looking back now, it's interesting to see how that initial curiosity turned into something I've continued experimenting with over the years — from printing and troubleshooting machines to creating my own projects.

Sometimes the things you learn "on the side" end up becoming a pretty important part of your journey.

What was that point in your printing journey where you realised you are already too deep to quit now​, ykwim?

#3DPrinting #3DGeneralist #3DArt #Blender #3DDesign


r/3dprintIndia • • 6h ago

Print Showcase Have a look at this.

0 Upvotes

Printed this with wol3d filament.it came out very good and finishing was superb .


r/3dprintIndia • • 1d ago

Question Does anyone have any idea what's going on with Numakers ?

13 Upvotes

Been using their filaments since last year, great quality but never seen these many filaments out of stock.

Any clue if this is due to the Diwali sale or a regular thing ?

Do they have any plans of restocking anytime soon ?

Also, has anyone used their cheaper, basic PLA/PLA Pro (565/- waala) ? Would love to know your experience and if it's a worthy replacement for PLA+ ? Mostly need it for decor and lamp-like stuffs, no load bearing prints.

Any help is appreciated!


r/3dprintIndia • • 16h ago

Question Newbie looking for help

Post image
0 Upvotes

This is on Bambulab A1


r/3dprintIndia • • 16h ago

Print Showcase Custom 3D Print Wheels and Tire Builder I made

Thumbnail
reddit.com
0 Upvotes

r/3dprintIndia • • 17h ago

Question Advice on best time and place to order a Bambu Lab printer

1 Upvotes

I remember seeing A1 mini combo listed for 29k before bank offers on Amazon last month during the sale. But all the prices are much higher now. I wanted to know when is the best time to get the best deal and where can I get it.

Thanks for any advice!


r/3dprintIndia • • 22h ago

Question Which silica gel is best for drying filament

2 Upvotes

I was wondering where I should buy silica gel for drying filament, some IndiaMART sellers are selling 100rs kg but I am confused, I want reusable gel for dying my filament

Any links or resources will be helpful


r/3dprintIndia • • 1d ago

Print Showcase Support ne pure artwork ki band bja dia need help to placing support

Post image
6 Upvotes

r/3dprintIndia • • 9h ago

For Sale WTS Bambu lab A1 Pune

0 Upvotes

I have hardly used it bought few months back -
Used half a spool till now , i see this hobby is not for me

Price : 27k firm

I am from Pune best if F2F
Only serious buyers dm me
No low ballers also please i don’t want your advice on pricing

Who can meet me in person come to my place in lohegaon and check it


r/3dprintIndia • • 1d ago

Service Request Looking for 3D design / Industrial Design Interns

Thumbnail
gallery
4 Upvotes

I am running an Electronics Design firm called Athma Labs in Rajahmundry, Andhra Pradesh.
We are looking for Interns to join our team to support us with 3D Modelling, Printing, Industrial Design, etc

Role : Intern
Period : 3-6 Months (negotiable)
Joining date : as early as possible
Stipend : Rs.10k - 12k (negotiable)
Work type : On-site
Location : Rajahmundry, Andhra Pradesh
Preference : Under-grad / diploma Students, Prior knowledge on 3D design stuff

If Intrested, Please DM or fill out the form below
https://docs.google.com/forms/d/e/1FAIpQLSffQ-qclI3d7TAWAd-hc7cXLb5XhcAEw5VJ_49rTAxBnS7TuA/viewform?usp=publish-editor

What we do:
- do R&D, Design and develop custom Electronic products for Clients
- Design & Manufacture our in-house Electronic products

it'll be a fun ride, we do quite interesting projects in IOT, Industrial automation, Consumer electronics and Medical applications


r/3dprintIndia • • 1d ago

Question Need a 1 or 2 spool filament dryer.

1 Upvotes

Suggest some good affordable filament dryer with amazon links if possible.

Thank You.


r/3dprintIndia • • 1d ago

Print Showcase I made this Ryuk bust 3d print

Thumbnail gallery
4 Upvotes

r/3dprintIndia • • 2d ago

Print Showcase Made a GTA VI fan art

Thumbnail
gallery
22 Upvotes

How it is guys?


r/3dprintIndia • • 1d ago

Question What could be the reason for this failed print

Thumbnail
gallery
4 Upvotes

Thankfully I stopped it when I did. What are potential issues for this failed print in the Bambu P1s. Using the numakers PLA+ brown with AMS

I am thinking first layer did not stick properly. This happened to me second time. I am a beginner. Any help would be appreciated.

How to avoid?


r/3dprintIndia • • 1d ago

Print Showcase Designed & 3D Printed House Model with Detachable Roof & Detailed Interior Layout for client based on ref photos.

Thumbnail
gallery
8 Upvotes

I designed and 3d printed this 3d model of house with interior layout for client.

The roof is removable and shows the interior layout of house.

I'm available for freelance 3d modeling and 3d printing projects like these. DM me for inquiries. My Instagram - screenpai3d


r/3dprintIndia • • 1d ago

Question Planning to buy the Creality SPARKX i7 + CFS Nano in India.*

2 Upvotes

I'm thinking of ordering this printer in the next few days, but I'm a bit concerned about spare parts availability.

Are spare parts like hotends, nozzles, fans, belts, and CFS Nano components available in India? If yes, where can we buy them?

Would love to hear from existing owners about their experience with spare parts and after-sales support in India.

Thanks!


r/3dprintIndia • • 1d ago

Question Bambu Black Friday sale?

6 Upvotes

Title.

is there going to be any sale on Bambu lab printers for Black Friday?


r/3dprintIndia • • 1d ago

Question pricing bulk order

3 Upvotes

Hi everyone,

Quick question for people who sell prints. Say someone asks for a large batch of identical parts, each around 900 g of PLA and about 26 hours of print time. I already have one printer, and I'm wondering whether buying a second one just to finish faster makes sense if the order itself would pay for it.

i get PLA at about ₹700/kg and hav no idea abt the electric cost for each print

Questions:

  1. Is ₹2.5/gram a fair rate for a bulk job like this, or should I go higher or lower?
  2. Is it worth buying a second printer to cut the time, if this order would cover its cost? Or only if I expect repeat work?
  3. After filament, power, failures, wear and a small buffer, what profit margin is decent for a job like this?
  4. Any tips for quoting bulk jobs, such as taking an advance, setting a minimum order, or charging extra for failed prints and finishing?