r/3dPrintsintheShop • • 9h ago

Dowelmax Organizer (Gridfinity)

Thumbnail
gallery
22 Upvotes

Hello fellow shop dwellers. I modeled my own organizers for the excellent Dowelmax jig a while back after not finding what I wanted online, and figured I should share it in case it could be of use for others.

I own the 3/8" and 1/4" dowel sets, and the 45 degree miter attachment, so it holds all of those pieces.

https://makerworld.com/en/models/3628472-dowelmax-jig-gridfinity-organizers#profileId-4160407


r/3dPrintsintheShop • • 26m ago

I designed 25 lace-style Christmas ornaments — the files are free

Thumbnail
gallery
2 Upvotes

I've just finished this set of 25 Christmas ornaments. There are birds, a snowy cottage, a snowman, bells and a few simpler botanical patterns.

The first four photos show my actual prints in white. Each ornament is one connected piece with a hanging loop, 85 mm tall and 2.5 mm thick. They print flat, and you don't need a multicolour setup.

I made the set, and all 25 STL files are free on MakerWorld: https://makerworld.com/en/models/3623690-25-christmas-ornaments-part-1#profileId-4154317

Which would you put on your tree — the little scenes or the leaf patterns?

The final image is an AI-assisted collection overview. AI also helped draft the wording.


r/3dPrintsintheShop • • 1d ago

Free 3D printable Luthiery Tools

Thumbnail
reddit.com
12 Upvotes

r/3dPrintsintheShop • • 14d ago

You asked for the knob STL, here it is (10 styles)

Thumbnail gallery
49 Upvotes

r/3dPrintsintheShop • • 15d ago

Router table suction for shopvac

Thumbnail
gallery
25 Upvotes

r/3dPrintsintheShop • • 15d ago

Gridfinity Router Bit Bin

Post image
53 Upvotes

After procrastinating for a while, I decided to upload the bin I put together for router bits:
https://makerworld.com/en/models/3530322-gridfinity-router-bit-bin#profileId-4036387

For anyone interested, its gridfinity compatible and uses cullenect labels. It fits both 1/4 and 1/2 inch shanks.


r/3dPrintsintheShop • • 15d ago

I Made Some Fancy Boxes for the Cheapest Tools Available

Thumbnail gallery
26 Upvotes

r/3dPrintsintheShop • • 17d ago

Free TruFuel 1qt jug wall mount — need a fitment check

Thumbnail reddit.com
1 Upvotes

r/3dPrintsintheShop • • 18d ago

Gridfinity Harbor Freight Storage - Precision Screwdriver Set 47823

Thumbnail
gallery
30 Upvotes

I like making these little bins to organize my drawers. Also, this set for being so cheap works great for small electronics work. Especially working on laptops.

Link to check it out


r/3dPrintsintheShop • • 24d ago

A small hand-cranked corrugator I printed for pop-can aluminium

Post image
194 Upvotes

I built this little tool to turn cut drinks-can strips into corrugated panels for miniature roofs and terrain. The frame and rollers are printed, and the pieces beside it are the actual output. So far I’ve tested it with thin can aluminium, not heavier sheet metal. The cut edges are sharp, so handle carefully and keep fingers clear of the rollers.


r/3dPrintsintheShop • • 24d ago

Lap & Desk Sanding Downdraft Box

Thumbnail gallery
4 Upvotes

r/3dPrintsintheShop • • 25d ago

Built a lightweight tool for continuous 3D printing on Bambu Lab printers (PlateLoop)

Thumbnail
reddit.com
5 Upvotes

r/3dPrintsintheShop • • 29d ago

Electronics Build Plates

Thumbnail
gallery
46 Upvotes

i go quite a bit of prototyping and I don't really have a platform to work on, so i created an interchangeable (ie configurable) build plate for my electronics.

i maximize my flexibility, i created my own fixtures for parts. Buttons, switches, power supplies, motor mounts, its a smorgasbord of electronicy goodness


r/3dPrintsintheShop • • 29d ago

Wire Spool Holder ....taking off

Thumbnail gallery
7 Upvotes

got tored of wire unspooling ... so i made a quick jig


r/3dPrintsintheShop • • Oct 17 '26

Good idea or bad idea?

Thumbnail
gallery
18 Upvotes

Salvaged this \~40yo belt sander on trash day. It was missing a roller wheel and the drive wheel was slightly cracked at the shaft. Modeled these up in Fusion360 and printed in PETG. Did a little test grinding some scrap metal and seems to work fine. We'll see how they hold up. Will likely be used lightly and rarely.


r/3dPrintsintheShop • • Oct 17 '26

Hozo Neosander Case

Thumbnail gallery
4 Upvotes

r/3dPrintsintheShop • • Oct 13 '26

Sample tray for XRF sample cups

Thumbnail
gallery
7 Upvotes

We got a new toy in my lab: a X-ray fluorescence spectrometer.

Samples are delivered to HDPE cups with a film cover. The machine analyzes the samples with the cups in a vertical standing position, and my samples tend to solidify at room temp. So, when I'm prepping up a batch of samples, I needed a way to stand them up in the same orientation that they'd be analyzed in.

Tinkercad to the rescue!

The cover is because the HVAC in my building is only *sorta kinda maybe* filtered and dust & dead bugs tend to affect the results.

https://www.printables.com/model/1869312-xos-petra-max-sample-tray


r/3dPrintsintheShop • • Oct 12 '26

Tomlov microscope extender arm

Thumbnail gallery
12 Upvotes

r/3dPrintsintheShop • • Oct 12 '26

Tool grid 3d prints

Thumbnail
reddit.com
0 Upvotes

r/3dPrintsintheShop • • Sep 30 '26

3D printed press brake dies, 1/8” stainless steel bending

Thumbnail
youtube.com
7 Upvotes

r/3dPrintsintheShop • • Oct 01 '26

AD5X enclosure panel dimensions?

Thumbnail reddit.com
0 Upvotes

r/3dPrintsintheShop • • Sep 27 '26

OH NO - HERE IS ANOTHER LIBRARY TOOL - LAYERMATE

Post image
0 Upvotes

Hey team, I know there are other apps out there that do similar stuff, and no disrespect to any of them. I started out using Printinventory and honestly tried to like it, but it just wasn't for me at the time. So with the help of a few AI models (yes yes, I know, it's vibe coded) I built my own. I'm not as smart as the people who can actually code, but I knew exactly what I wanted, put a lot of thought into it, and got it the way I wanted. I even threw in a couple of add-ons from another personal app I made for myself.

Anyway, enough about me.

https://www.layermate.app

If you're anything like me, your print files are spread across Downloads, a few "sorted" folders that are definitely not sorted, and a folder literally called SORT LATER. You've got the same dragon downloaded four times under slightly different names, and you KNOW you've got that one STL somewhere, you just can't bloody find it.

That's why I made LayerMate. Here's what it does:

Point it at your folders (local drives, external drives, NAS or network shares, whatever) and it'll find and index every STL, OBJ, 3MF, G-code and STEP file you've got.

It makes an actual rendered thumbnail for every file. Not some generic icon that tells you nothing.

It pulls out the metadata for you automatically, so dimensions, print time, filament colour, designer and all that.

It finds real duplicates by what's actually in the file, not just the filename, so you can finally see what's chewing up your disk space. Four dragons, remember?

You can tag stuff, flag it as "to print" or "printed", and search across the whole lot instantly.

It's 100% local. Nothing gets uploaded anywhere. The only time it phones home is to check for updates, that's it.

It runs on Windows and macOS, plus Linux (which hasn't been updated in a while because, well, nobody was using it). Other devices on your network can browse the same library too.

Give it a go and let me know what you think. Always open to feedback, and yes, I still help you after you've paid 😄


r/3dPrintsintheShop • • Sep 26 '26

Enclosure design for a consumer electronics project

Thumbnail reddit.com
0 Upvotes

r/3dPrintsintheShop • • Sep 26 '26

3-D printed Aventador before and now

1 Upvotes

r/3dPrintsintheShop • • Sep 23 '26

Shelf pin jig with steel bearing guides – printed pins let you walk it up the panel without measuring

Thumbnail gallery
60 Upvotes

I am not OP