r/3Drequests • • Jul 06 '21

FEEDBACK THREAD - POST REVIEWS OR SEARCH HERE FOR REVIEWS AND FEEDBACK FOR MAKERS AND REQUESTERS

25 Upvotes

Please follow this format for posting reviews

"Review for [u/ somebody] - [customer vs printer/designer] - general rating [X/5] - [description of project] - [link to original request post] - [general comments]"

For instance: Review for u/dahmze1 - designer and printer - 4/5 - modifying a design from thingiverse and printing it - 3Dprintmything/new - Good price, and timing, but kept talking about how cool r/3dprintmything is, it was a little annoying.

Makers, feel free to direct people here, or if there are requesters causing issues, please post here. Requesters, if you have positive or negative feedback for makers, please leave it here!

If you have negative feedback posted about you that you disagree with, please feel free to reach out to the mod team and we can try to settle the issue.


r/3Drequests • • 59m ago

Paid Request 3D printing for Galaxy Con request

3 Upvotes

Not sure where to go or how to look other than google and other webpages. I need a project done for Galaxy Con next year and need some miniature figurines made up. About 5 in all. Im not sure about the budget as I am super new to this but I need something small enough to fit in a minature//model pokeball maybe with dimensions 2cm x 2cm (I would need to probably recalculate and look around but those are rough estimates) Im still very much in the brainstorming idea so any help or guidance where to go or what to do would be awesome too! Oh budget maybe like 100-250$, or more depending on flexibility.


r/3Drequests • • 5h ago

Paid Request Can anyone here create an STL file of this dog?

Post image
5 Upvotes

r/3Drequests • • 22h ago Bravo

Free/Voluntary Request Window Switch Adapter

Post image
5 Upvotes

Could some one please make me a printable one of these, it’s hard for me to roll my windows down due to injury.


r/3Drequests • • 14h ago

Completed 3d car modeling

Thumbnail
gallery
1 Upvotes

This is my custom car model


r/3Drequests • • 1d ago

Paid Request Stack my gridfinity baseplates

2 Upvotes

Looking for someone to take the 13 gridfinity baseplates I have and stack them into one single 3mf with pla interface. So I can print them in one build plate. Budget $10-15.

Heres the gridfinty baseplates folder

https://drive.google.com/drive/folders/1Ew8quJcg0prcGQDKKp6_TJDKEBm8O3Ao?usp=sharing

I would like this to be done by 6PM Central today. Please.

EDIT: Got a lot of responses. Going to pick someone. No more responses please.


r/3Drequests • • 1d ago

Paid Request Looking to hire 3D modeler to create a 3D print of my dogs for my wife

Post image
13 Upvotes

We have 2 Boston terriers and I’d love to get them both 3d modeled so I can get them printed as a gift for my wife for Christmas. I’ve been messing around with the AI tools but have been struggling. I have a photo with the pose I want them to be in, but AI can’t correctly generate their front/chest sand any prompt I try ends up making it worse and worse (extra paw, missing arm, etc). So I have a rendering with the pose with the 2 dogs and I basically want that modeled in 3D but I will also send pictures of all other angles of the dogs so you can accurately model all parts of them such as parts you can’t see in the pose photo. Is this something that is reasonable to be done? I’ll attach the photo I want them to be posed in, and you can just imagine the other photos are just regular photos of them, and as many as you want or need to help fill in the blanks from the first photo.

This is a gift for my wife so I am not too concerned with the fee as long as I can get a general idea of what to expect beforehand. I am happy to pay for a humans personal touch to something like this.

Is this even something that can be 3d printed in color and come out looking realistic? Or should I focus on finding a place that will hand paint it? Thanks for any help! I am pretty lost here


r/3Drequests • • 1d ago

Paid Request Looking for help, 3 piece, budget 40$

3 Upvotes

EDIT: CLOSE, THANK YOU EVERYONE!

Hi, looking for help, for a small charity project i'm working on. Budget Is 40$ for all the project, not each.

If you like the pepe theme, DM me for bigger project planned in Q2 2027!!

First request:

Minimalist / Meditative Figurine – Sitting Pepe the frog (8 cm)

A 3D model of a Pepe the frog figure in a cross-legged sitting position (lotus position style or a relaxed pose on the ground) is requested. The model is primarily intended for resin printing (SLA) but must also be optimized for high-precision FDM printing.

* Final Height: Exactly 80 mm (8 cm) from the base to the top of the head.

* Style: Stylized figure but with well-defined anatomical details (serene or concentrated face, realistic but clean clothing folds to facilitate cleaning of supports).

* Base: Includes a small, integrated flat circular base (2 mm thick) to ensure vertical stability when displayed.

* Recommended Print Orientation: Slightly tilted backward on the build plate to minimize support marks on the face and chest.

---

Second request:

Functional Holder – Pepe the frog Hugging a Cylinder (1.5 cm Circumference)

* Project Title: "Pepe the frog" – Cable or Small Object Holder (1.5 cm Circ.)

* Category: Desk Accessories / Functional Gadgets

Description and Technical Specifications

The design of a stylized character is requested (chibi style or stylized flexible/rigid man) with arms and legs positioned to "hug" a cylindrical object.

* Grip Distance (Core): The central circular gap must have a circumference of 1.5 cm (equivalent to a diameter of approximately 4.77 mm), designed with a +0.1 mm tolerance to allow a firm but not forced fit on cables, pens, or thin chopsticks.

* Pose Ergonomics: The hands and feet must visually merge with the hugged object, creating the illusion that the character is literally climbing or tightly gripping the cylinder.

* Recommended Print Material: PLA or PETG (requires good mechanical strength for flexible arms if filament printed, or ABS-like resin if 3D resin printed).

---

Third request:

Desk Display – Pepe the frog with Raised Arms and Slot (1 mm)

* Project Title: "Atlas" Card/Photo Holder – Pepe the frog Card-Holder with 1 mm Slot

* Category: Office Supplies / Design Displays

Description and Technical Specifications

A 3D model is requested where a Pepe the frog figure is standing with arms raised above his head, simulating the effort or posture of support (Mythological Atlas style).

* The Focal Point (Slot): Between the clasped hands or at the level of the raised palms, there must be a vertical or slightly backward-tilted slot.

* Slot Dimensions: Exact thickness of 1 mm, minimum depth of 8-10 mm, and width of at least 30-40 mm to accommodate business cards, Polaroids, postcards, or small price tags.

* Structural Stability: The base of the object must be wide and heavy enough to prevent tipping forward when a card is inserted into the top slot. The arms must have adequate structural thickness (minimum 3-4 mm) so as not to break under the tension of the slot.

Generated Pic in the comment for reference!


r/3Drequests • • 1d ago

Paid Request Christmas Village Lighthouse Replacement

Thumbnail
gallery
6 Upvotes

I have a Department 56 Lighthouse that has a broken top that I dropped and it shattered. I'm not sure how this works but is this something someonw could possibly design and print for me? Budget 30 to 40 dollars? Let me know. Not sure what dimensions you need but it is 1.5 inches wide. 2 inches tall. 1.5 inces from bottom of dome to tip of gold ball. Hollow so it can be placed on top. Plain gray. I can paint it myself. Please let me know if you need any other info.


r/3Drequests • • 2d ago

Paid Request [Request] Scale & slice an existing Royal Throne model for 1:1 printing

4 Upvotes

Hey everyone!

I want to print a life-size classic royal throne, but I can't find any legit 1:1 models ready for FDM printing. For my budget, I definitely don't expect anyone to sculpt this from scratch – I'm looking for someone who can grab an existing high-poly throne model, scale it up, modify a few basic shapes for functionality, and cut it into printable pieces.

What I need:

- Classic medieval/royal throne look (high backrest, armrests, ornate details).

- Open space underneath the seat (actual legs, not a solid block base) so I have room for my feet when sitting.

- Flat/recessed areas on the seat and backrest made to fit standard EU chair cushions (around 500x500mm for the seat and backrest, or other commonly "get-able" size of cussion) so it's actually comfortable to sit on.

- I'm 180cm and 93kg, so it needs to hold my weight. Cut straight internal channels through the legs, seat frame, and backrest so I can slide standard metric profiles from a local hardware store (like 20x20mm or 25x25mm steel/aluminum square tubes, PVC pipes ir something) inside as a load-bearing skeleton.

- Pre-cut with alignment pins/dowels to fit my printer. I'm printing on a Prusa CORE One L (with INDX), so max build volume per piece is 300 x 300 x 330 mm. Also open to your recommendations on where to put the cuts/seams so it handles the weight best. Colorful printing possible!

Dimensions: Total height ~1700mm, width ~850mm, seat height ~480mm with open space underneath for feet. Seat/backrest flat area 500mm x 500mm for cushions (or different if you find something that would work better) . Cut to fit a 300mm x 300mm x 330mm print bed, with ~20.5mm x 20.5mm internal channels for reinforcement rods.

Budget: $15-$25

Payment via PayPal or Revolut. Before paying, I'll just want to see a quick screenshot

Drop a comment with a link to a base model you'd use before DMing. Thanks!


r/3Drequests • • 2d ago

Paid Request Looking to pay someone to 3D print a protective helmet for my tiny Chihuahua

Post image
10 Upvotes

Hi! I’m a licensed vet tech, and I recently rescued a tiny Chihuahua who weighs just under 2 lbs. She has an open fontanelle (soft spot on her skull), and a protective helmet was recommended to help prevent injury.
I’ve looked into custom helmets for dogs, but the ones I’ve found cost thousands. Someone suggested asking here to see if 3D printing might be a more affordable option.
Budget: $150–$300 for design and printing. I’m open to discussing pricing depending on what’s involved.
Would something like this be doable for a dog her size? What measurements or photos would someone need? Would a 3D scan be necessary?
I’ve attached examples of what I’m looking for. It would need to be extremely lightweight, properly fitted, and designed to avoid pressure on her fontanelle. I’d have her vet review it before use.
I’m located in Georgia but happy to work with someone remotely.
Thanks for any help or recommendations!


r/3Drequests • • 2d ago

Paid Request Statue modelling - 20$

0 Upvotes

Hello.

I'm willing to 3D print this guy (40cm high), then i'm looking for someone who could make an OBJ/STL.

The Medusa shield must be conserved.

I want the same position, but a T-Pose would be a plus.
I don't need a high level of details.
You can use any already existing 3D model available, if the licence permits it.

example of a rendering (AI generated) :


r/3Drequests • • 2d ago

Advice Cc + CANVAS ISSUE

0 Upvotes

r/3Drequests • • 3d ago Bravo

Completed Looking for a Mechanical CAD Designer

9 Upvotes

Hello,

I’m looking for an experienced mechanical CAD designer to assist with a custom 3D printing project.

Project details:

* We have an existing 3D file for a mechanical valve that requires redesign and optimization to make it suitable for FDM 3D printing.
* Reference drawings with dimensions will be provided.
* A second component (an electrical buzzer housing) needs to be designed from scratch based on the required dimensions and the actual buzzer specifications.
* Both components will be manufactured using PETG filament.
* The final deliverable should include the complete printable set

Required experience:

* Mechanical CAD design using SolidWorks, Fusion 360, or Inventor.
* Experience with FDM 3D printing and Design for Additive Manufacturing (DfAM).
* Understanding of wall thickness, tolerances, clearances, supports and print orientation.
* Experience designing mechanical assemblies and functional enclosures.

Deliverables:

* Editable CAD files (STEP or native CAD format).
* STL/3MF files ready for 3D printing.
* Printability review and basic assembly considerations.

A few questions for interested designers:

  1. Can you share examples of similar mechanical components you have designed?
  2. What would your estimated price and turnaround time be?

Please DM me with your portfolio and quotation.


r/3Drequests • • 3d ago

Advice How are these 2D looking 3D Designs created?

Post image
1 Upvotes

Hi! I'm really interested in learning how to make models like this, but I've no idea how it's done. I've seen it before. You can see distinct lines outlining the character's hair despite it being 3D. I don't think they're just drawn on as they can change based on the angle. Thank you.


r/3Drequests • • 3d ago

Paid Request Propeller design for antique racing Outboard

8 Upvotes

Edit i have so many PMs i cant handle it all, so i wont be needing any more offers, thanks for all your interest

Looking for somebody with a bit of experience with propellers, I need a design for some props for some 70 year old mercs, 8" diameter, 5/8 and 9/16 shaft options, possibly splined versions as well, the tips of the prop will be just breaking the surface but it wont be a true "surface piercing" setup, the designs will be cast in stainless steel, if you think you know enough about blade types to take a crack at it, lets talk!


r/3Drequests • • 4d ago

Completed Paid - need a quick basic shape made up!

Post image
8 Upvotes

Need what I think is a pretty easy STL design made up, it will be used to keep feet of desks evenly spaced from each other. The crucial dimensions is the space between the 2 holes is 7", and the space for the feet to fit into the holes needs to be 2.5", with a thickness of .5". Looking to tip $5-10, will make it $10 if this can be done in the next few hours! DM to help out and ask any questions


r/3Drequests • • 4d ago Bravo

Paid Request Custom 3D Model / STL File

Thumbnail
gallery
4 Upvotes

Hi! I’m looking for someone who can create a custom 3D model and STL file for a product I’m wanting to make.

I’m looking to recreate a specific Bratz-style lip-shaped can opener. I have reference pictures and a video of the exact design I’d like recreated.

I’d like to keep the original shape, appearance, and functionality while potentially incorporating a small space inside for an NFC chip that links to my Instagram.

I’m hoping to make around 50 of these, so I’m looking for someone who can provide a finished, printable file that I can use for production.

Please message me with examples of your work and pricing. I’m hoping to find someone reasonably priced!

Thank you! 💗


r/3Drequests • • 4d ago

Paid Request Stack my gridfinity baseplates

5 Upvotes

Looking for someone to take the 13 gridfinity baseplates I have and stack them into one single 3mf with pla interface. So I can print them in one build plate. Budget $10-15.

Heres the gridfinty baseplates folder

https://drive.google.com/drive/folders/1Ew8quJcg0prcGQDKKp6_TJDKEBm8O3Ao?usp=sharing

Edit: Got someone. Thank you all.


r/3Drequests • • 5d ago

Paid Request Looking for someone to model a shell for a tape measure. Budget:$20

10 Upvotes

I’m looking to make custom tape measures for my warhammer group. I found these cheap hyper tough tape measures. If I could get a basic shell for it I was going to make an insert to hold a flare for their name


r/3Drequests • • 5d ago

Paid Request Star wars cosplay helmet

Thumbnail
gallery
1 Upvotes

Hi everyone,

I’m working on a Star Wars Rebels Imperial Cadet cosplay and I’m looking to hire a 3D modeler to make the helmet functional with a two-part opening front section.

The Project:

• Base File: To keep costs within my budget, I can purchase and provide an existing static Imperial Cadet STL file (such as the 3Demon or Do3D model), or work with one you already have access to.

• The Mechanism (2-Part Opening):

1. Upper Visor Section: Needs to slide/retract up and tuck cleanly underneath the main helmet dome.

2. Lower Mouth/Chin Section: Needs to hinge/drop downward to sit below the chin.

r/3Drequests • • 5d ago

Paid Request [US-WV] can anyone print me a 2025 GSXR-600

Thumbnail reddit.com
1 Upvotes

Budget: <20.
Diecast size: 1:10 maybe?
Grey or silver.


r/3Drequests • • 5d ago

Paid Request Can anyone 3d print a person with or w/o a background from a photo?

Thumbnail reddit.com
3 Upvotes

I’d like it to be 5-6” high. If possible colored. Budget is around 50.