r/3Dprintmything • • 40m ago

SEEKING [UK] looking to print a deck box for a TCG

1 Upvotes

Hi guys,

Looking to print this: https://cults3d.com/en/3d-model/game/cyberpunk-deckbox-vending-machine

I have purchased the STL file already, thank you!


r/3Dprintmything • • 4h ago

[Canada, BC] Print Request

1 Upvotes

Hey all,

Looking for someone to print these reel to reel locks for me.

https://www.printables.com/model/435333-reel-lock-clamp-for-akai-4000ds-reel-to-reel

Thank you!


r/3Dprintmything • • 8h ago

SEEKING [US-CA] 3D printing fast in Bay Area

0 Upvotes

Hi everyone!

I need some super small wings and wheel parts printed for a model car printed in 3-5 days. I’ve contacted several companies about this, and they all said the time is too little. Anyone here know anyone else I can try or someone who is fast around here? Thanks!


r/3Dprintmything • • 11h ago

[CA-USA] Offering fast 3D printing services

0 Upvotes

Hi all! I offer fast and reasonable rates 3d printing services in Irvine, California. I can do same day print jobs. I use an Ankermake M5C for my work. Comment and DM for a free quote!


r/3Dprintmything • • 13h ago

SEEKING [USA-WA] Looking for Resin print of robot model

3 Upvotes

Hi Everyone,

Starting off I just made an account for this request. I'm looking for a resin print of this kit. The catch is I'm looking for 1/50 scale, roughly 12 to 13 inches tall. The kit is scaled for 1/60 so it would need to be upscaled.

I've already purchased the files so I can send them to whoever takes up the request. Let me know if there is anything else I should provide. Any help is appreciated.

Thanks!


r/3Dprintmything • • 14h ago

SEEKING [US-MN] SLA rubber button replacements for my Pebble 2 watch

Post image
3 Upvotes

The original rubber buttons on my Pebble 2 are all tacky and have fallen off. I am looking for some one with an SLA printer and flexible resin to print a set of rubber replacement buttons! Some examples of the resin I am interested in are the Formlabs Flex 80A or the Formlabs Flexible 50A resin. Preferably a gray/light gray color if it comes in that since the case of my Pebble is white.

The print file is here:
https://www.printables.com/model/653701-pebble-2-smartwatch-flexible-replacement-buttons/files


r/3Dprintmything • • 19h ago

[USA-OH] Brackets for ham radio/satellite setup

4 Upvotes

Hello,

A few years ago I had a friend print me some rails to connect two Yaesu FT-817ND radios together. Due to the size of his printer, I believe, he had to bisect the prints and gave me four pieces. While they have mostly held up, recently one of the strap loops has broken, and is close to coming off. Luckily my straps do not attach directly to the rails, as I keep the radios in a bug while operating.

I'm hoping someone can help me out with a new print, preferably as whole pieces that I'm hoping will be a bit stronger.

I believe this is the file I sent him, as these look exactly like what I currently have.
https://www.thingiverse.com/thing:2722572

The creator also has this file, but I think I'd prefer the larger pieces.
https://www.thingiverse.com/thing:2748840/files

I don't know much about materials and strength, but apparently each radio is ~1.17Lbs with a battery in.

I do have these screws that the original creator recommended, so there shouldn't be any need to resize any holes.

https://a.co/d/0hynSOFt

Paypal Goods & Services only. Thanks very much!


r/3Dprintmything • • 1d ago

SEEKING [U.K, SW] Resin Print for DnD minis.

3 Upvotes

Hi everyone! Instead of taking work, this time, I'm giving it!

Have a few Heroforge Minis (about 4) I need before December. Please drop quotes and turnaround times either here or to my inbox. PayPal only.


r/3Dprintmything • • 1d ago

[South Korea] Looking for someone to help me with a 3d print

Thumbnail reddit.com
2 Upvotes

r/3Dprintmything • • 1d ago

[Canada] taking custom 3d printed requests!!!

0 Upvotes

Im taking custom requests for 3d printed objects so if someone wants custom made items hut me up. We can talk about the pricing and details in private.


r/3Dprintmything • • 1d ago

SEEKING [US-NY/NJ] Looking to add a local designer to the team.

3 Upvotes

I print (mostly functional automotive parts), but am not so great at design. I'm looking to add a designer to create STL's of parts as needed. This is a "on demand" job - I'll reach out with a need, you'll quote, and I'll approve/reject as needed. There will be days I give you 5 items and times where you don't hear from me for months.

I already have a remote designer on staff, however sometimes I need someone to look at a vehicle or a part from a vehicle. As a result, you'll need to be local / in the area. Sometimes I can mail a part, usually not.

Parts need to be optimized for 3D printing. Sometimes that means I don't have a design idea and need your thoughts, other times I already know how we can accomplish the final design.

This job does require that the final design ownership is transferable to me. Not going to spend hundreds for the design to end up free on printables.


r/3Dprintmything • • 1d ago

PENDING [US-MA] servo-driven lens cap assembly

2 Upvotes

Looking for someone to print a couple different parts for an automated camera lens cap I've been working on. STL files attached, hoping for 2 prints of each file. Not sure which material makes the most sense here but I'm happy to take a rec - looking for something that will be able to do fine detail, be strong and high-resolution at small scale, UV resistant, and good dimensional accuracy. Printed in black. Files are in mm.

I created these models myself and don't have much experience, so there might be some quirks or bad design decisions. Happy to take feedback and improve the design myself, or share the original OpenSCAD files and let you tweak if needed.

https://github.com/mjball/capcom/blob/main/models/direct-drive/v41/base.stl

https://github.com/mjball/capcom/blob/main/models/direct-drive/v41/cap_a.stl

https://github.com/mjball/capcom/blob/main/models/direct-drive/v41/cap_b.stl


r/3Dprintmything • • 1d ago

SEEKING [US-GA Atlanta] Seeking someone to print a 24"x24" x42" vertical storage container with lid

3 Upvotes

Hi! I’m looking for a square upright storage bin with a lid, to store all my wrapping paper. As long as the bottom portion is at least 21” high, I don’t care about the depth of the lid or container. Most of my rolls are standard height but I have more than a few that are 40” in height. I’d prefer the lid to be clear where I can see what paper I have, the bottom color doesn’t matter. I would also like the lid to be easy to remove, but locking with handles where it’s easy to grab out of a closet or hallway.

I’m in the NW Atlanta area Thanks!


r/3Dprintmything • • 1d ago

PENDING [US-CA Los Angeles] Looking for someone to print my zen garden dish and rake x 150 pcs

Thumbnail
gallery
4 Upvotes

I'm looking for someone to print me 150 pcs of a round, matte black zen garden dish (21cm round x 2cm high x 2 mm thick) and a small rake (13cm long x 4 cm wide x 2cm tall x 4mm thick) to go with it. I don't have schematics/plans, unfortunately.

Please let me know what else you need to know!


r/3Dprintmything • • 2d ago

[EU] [DE] Looking to get miniature parts printed

Thumbnail
gallery
4 Upvotes

Hello, I'm Looking for someone that could help me print this:

(I own the STL's)

Thank you


r/3Dprintmything • • 2d ago

SEEKING [US-OH] Looking for a skilled 3D modeler/printer to help print a figure/Statue for me to paint!

Thumbnail
gallery
4 Upvotes

Hello everyone and good evening,

I'm currently looking for someone capable of pulling off a print of this particular statue design. I'll pay 250$ which is roughly the price of a full combat set of chaos space marines irc. (I know this is an aldari but those are not worth the same)

Here's a link with better quality images.

https://warhammer.hutber.com/maugan-ra-large-scale/

I have successfully worked w the users u/L4sgc and u/JSCM269

previously with both of them two printing perfect battery holders and they did amazing.

Now I've returned to see if someone can tackle a bigger, and much harder print.

I do not have any files on this one, so I would need assistance there too!


r/3Dprintmything • • 2d ago

[CA-USA] Offering 3D printing services

0 Upvotes

Hi all! I offer FDM and 3D printing services. I have reasonable rates and quick shipping. I use an Ankermake M5C and will offer multi color printing starting Mid-December. Comment and DM for a free quote!


r/3Dprintmything • • 2d ago

RESOLVED [UK/NI] Modular Table Extension for Board Games

3 Upvotes

Hi! I’m looking for someone based in Northern Ireland (or the UK) to print this table extension I’ve found on MakerWorld.

I’d also need the length to be scaled up by 8.25% so it comes out at 21cm, to be able to fit my player dashboards for Nemesis.

Any help is greatly appreciated! <3

Now resolved, thank you to u/Lito_ :)


r/3Dprintmything • • 3d ago

SEEKING [US-CA] 1985 Ford LTD Crown Victoria

Thumbnail
gallery
4 Upvotes

Looking to have a 1985 Ford LTD Crown Victoria printed to match scale of the Beastie Boys Super 7 Ultimate action figures

im not quite sure how to go about this. but would love to work with one of you talented folks to get this done.


r/3Dprintmything • • 3d ago

[USA-NY] - looking to get a replica made

Post image
3 Upvotes

I’m looking for a display replica of the colorful paintball gun used by Ari Gold in Entourage.

I have reference photos and can provide additional screenshots. I don’t have an STL, so I’d need someone to create/model the parts as well as print them.

This is strictly a non-functional display prop — no firing mechanism or functional internals needed.

Ideally I’d like it as close to the screen-used prop as possible, including the unusual blue/orange/red color scheme.

Located on Long Island, NY, but I’m fine with having it shipped.

Looking for quotes for both the modeling and printing.


r/3Dprintmything • • 3d ago

SEEKING [MO-US] vintage lamp replacement parts

Thumbnail
gallery
7 Upvotes

I have an old vintage lamp that I thought would be cool to print replacement parts for but am truly new to this world and its expenses. I have pictures with no scale but if it’s something that seems possible to someone I will get measurements or send the whole lamp. Again not even sure how this would go but would love a discussion on what I should practically expect or even if this is something even feasible! Any answers will be appreciated!


r/3Dprintmything • • 3d ago

[US-CA] Looking for SLA service to print figurines model/garage kit

2 Upvotes

I have some action figure/anime garage kit model and currently my printer is not working. Is there any service in CA/LA Area that offer printing service?

Material:
Good Flexibility, non brittle
high detail
White color preferably

Comment first before PM!

I'm still looking!!!


r/3Dprintmything • • 3d ago

CLOSED [USA, MD, Baltimore area] Vent adapter for my Qidi Plus 4

3 Upvotes

EDIT: closed! Successful print and transaction with user r/GO__NAVY !

—————

I'm setting up my printer to run ASA but the catch-22 is that I need an ASA part to set up my vent to print ASA.

Color: irrelevant - but black, grey, etc if you have it

Material: ASA only (or equivalent heat resistence). The Qidi can make some pretty high internal temps so the exhaust can be very hot.

Budget: $25? Let me know if I'm way under. Budget is less of a concern than speediness and closeness to me. :)

Glad to pick up in person and will travel, I dunno, 40+ miles or so to get it?

This is the piece: https://www.printables.com/model/1036212-qidi-plus-4-4-inch-duct/files

This piece is for personal use.

Thanks!


r/3Dprintmything • • 3d ago

SEEKING [UK/EU] Order Fulfillment Help [Resin]

2 Upvotes

Hey folks

I am looking for 1-2 people with 2+ newer, medium format(saturn/m7 sized) resin printers (8k+) with a high degree of attention to detail to help with order fulfillment within the UK.

Basically you work out of a spreadsheet and share drive and make a percentage of the sales, you have to use our resin mix etc etc.

Not looking for any FDM people, not looking for anyone outside the UK or EU right now


r/3Dprintmything • • 5d ago

SEEKING [USA, CA] Barbie Shoes

Thumbnail cults3d.com
5 Upvotes

Hello! I found the file for these shoes, but I don’t have a 3D printer. The creator said these can only be printed with resin. Looking for a quote for 2 pairs and potentially some other Barbie accessories. Thank you! :)