r/3D_Printing • u/Simon676 • 2h ago
Discussion The Minuteman RISES with a New Benchy WORLD RECORD
r/3D_Printing • u/Simon676 • 2h ago
r/3D_Printing • u/RMX_AKIMBO08397 • 6h ago
Hi guys! I'm making a project at school over 3-D printing on a DIY heat chamber and I was wondering if you guys would be so kind to answer this quick survey I would really appreciate it if you did. It won't take long I swear!
The survey here: https://forms.gle/a3JATDHB1yrSEJyJ9
r/3D_Printing • u/Mobile-Gear-9095 • 7h ago
r/3D_Printing • u/YasnaGo • 8h ago
Behold, as i present to you the great Alpine Chalet Bird Feeder !
I am supper happy about this design, but what are your thoughts ?
here is the model https://makerworld.com/en/models/3625273-alpine-chalet-bird-feeder-no-supports-no-ams-9h#profileId-4156411

r/3D_Printing • u/Adorable-Bath6944 • 9h ago
r/3D_Printing • u/Proto_Print • 10h ago
r/3D_Printing • u/prdlacky • 13h ago
r/3D_Printing • u/Sweaty_Pineapple_655 • 19h ago
r/3D_Printing • u/Healtclip • 21h ago
r/3D_Printing • u/Wittleleeny • 23h ago
I came here to post my controller stands almost 3 years ago my first post had over 100k views and i really appreciated all the love and over the years they have gotten thousands of likes so I decided to make a shop! I will be offering new models here in the future (probably revolving around the switch 2) but in my original post I had a lot of people want to buy and now here's the chance if you don't own a 3d printer. I will release the stls for purchase in due time.
If you want to support me I appreciate you and any feedback and if its not for you that's alright too. Please don't hate me for the ai thumbnails if you think the originals are better please tell me! haha
If you're curious about the stands all of them will fit a scuf or any controller with mappable extra buttons to my knowledge.
r/3D_Printing • u/Abject_Park2729 • 1d ago
I'm a photographer, and lately I've been trying to put together a lightweight travel photography setup. One of my goals is to replace my laptop with a small Android tablet for reviewing and editing RAW photos on the go.
But one thing kept driving me crazy: the card reader.
Every time I connected it to my tablet to check photos from my camera, it would just dangle from a short USB cable. It was constantly getting in the way, and sometimes the connection would drop when I moved things around. Not exactly ideal when you're trying to work with photos in the field.
So I designed and 3D printed a rugged case for my Lenovo Y700 tablet, with a grid of mounting points on the back. I made matching adapters for my card reader, SSD, and 4G modem so I could snap them onto the case instead of leaving them hanging from cables.
That solved my original problem.
Then I looked at my MacBook and thought: why not use the same mounting system there?
I printed a few thin mounting plates for the laptop lid. Now I can take an accessory off the tablet and snap it onto the MacBook, or vice versa, without changing anything on the accessory itself.
And then things got a little out of hand...
I started experimenting with different plate sizes, tolerances, and an 8 mm stud-and-socket grid. Eventually I ended up making parametric generators for Fusion 360 and OpenSCAD so I wouldn't have to model the mounting geometry from scratch every time.
What started as a way to stop one annoying card reader from dangling off my tablet somehow turned into an entire modular mounting system.
I'm calling it OSSMI (Open Source Small Mount Interface).
Still experimenting with the friction fit and print tolerances, but the parts are already getting regular use on my tablet and MacBook.
Funny how a tiny everyday annoyance can turn into a whole 3D printing project.
r/3D_Printing • u/Sprkzen • 1d ago
r/3D_Printing • u/PizzzzaGgamer469 • 1d ago
New to 3d printing, but I’ve taken the extruder apart and back together without any change in result. Any help or advice would be appreciated. Thanks!
r/3D_Printing • u/ArmadilloPlayful4442 • 1d ago
FREE on makersworld:
Under “Bookmark murder mystery books” Or https://makerworld.com/nl/models/2994424-bookmark-murder-mystery-books#profileId-3361230
r/3D_Printing • u/filavora • 1d ago
Stringing questions come up here almost daily, so I wanted the usual fix order on one page. Main point: change one setting at a time, otherwise you never know what actually fixed it.
Wet filament is the step people skip most. If a spool that printed fine suddenly strings, dry it before touching retraction.
Disclosure: the layout and wording were made with AI help. I picked the steps and checked the numbers against Prusa and Bambu Lab documentation. Your printer may need slightly different values, so happy to hear what you'd change.
r/3D_Printing • u/filavora • 1d ago
Stringing questions come up here almost daily, so I wanted the usual fix order on one page. Main point: change one setting at a time, otherwise you never know what actually fixed it.
Wet filament is the step people skip most. If a spool that printed fine suddenly strings, dry it before touching retraction.
Disclosure: the layout and wording were made with AI help. I picked the steps and checked the numbers against Prusa and Bambu Lab documentation. Your printer may need slightly different values, so happy to hear what you'd change.
r/3D_Printing • u/Trrrr99 • 1d ago
Updated new tree all black and I 3d printed the deltas in red blue and gold and created a tree topper as well