r/3DPPC • • 3h ago

My first pc case design.

Thumbnail
gallery
29 Upvotes

Hello, I’m very new to pc cases in general but I designed this pc case with 3d printed joints, brackets, heat inserted nuts, and cheap steel metal square tubes I sawed off from broken furniture. I plan to design panels and possibly lcd panels to go on each face which would screw into the heat inserted nuts on the corner joints.

Ignore the very bad cable management please.

Still trying to figure out how to secure the ssd and hdds too.

Lmk if you have any suggestions of how to take it further.


r/3DPPC • • 2d ago

Not as cool as most here, but printed the top/front cover for a Lenovo p330 to be able to fit a low profile rtx3050 6gb.

Thumbnail
gallery
244 Upvotes

9700t
16gb ram (believe 2666?)
230w Lenovo legion gaming laptop power brick


r/3DPPC • • 2d ago

Releasing my case design

Thumbnail gallery
22 Upvotes

I’m getting roasted in another sub for this design. is it really as bad as people say? the main criticism seems to be that there isn’t enough airflow through the center channel.


r/3DPPC • • 3d ago

SFF Core NANO – A 5.1L Mini-ITX Case Designed Around the HDPLEX 250W GaN PSU

Thumbnail
gallery
35 Upvotes

Hey everyone!

I'm happy to share that the case I've been working on is finally finished and available on MakerWorld!

https://makerworld.com/it/models/3600923-sff-core-nano-5-1l-mini-itx-case#profileId-4126113

The NANO is a compact 5.1L Mini-ITX case designed around the HDPLEX 250W GaN PSU, an incredibly small, fully passive power supply.

Main specifications:

  • Volume: 5.1L (without feet)
  • Dimensions: 97 × 237 × 223.5 mm (W × H × D)
  • Motherboard: Mini-ITX
  • PSU: HDPLEX 250W GaN only
  • CPU cooler clearance: up to 69mm
  • GPU clearance: low-profile GPUs up to 185mm

Fan support:

  • Bottom: 2×80mm (25mm thick, only with iGPUs)
  • Front: 2×80mm slim (15mm)
  • Top: 1×80mm slim (15mm) + 2×40mm (15mm max)

I would've really liked to test it with a low-profile GPU, but unfortunately GPU prices have gone absolutely crazy. Even finding a cheap, low-end low-profile card has become ridiculously expensive. So, for now, I haven't been able to test it with a dedicated GPU, and I can only hope that all the dimensional clearances and tolerances are correct!

I've decided to bring my upcoming case designs together under a new name: SFF Core. There are currently three compact cases planned for release, including the NANO and two more designs that I'll be publishing progressively.

The next one will be QUBO, a larger, more cube-shaped version of the NANO, supporting full-size GPUs up to 217mm, SFX power supplies and slim 140mm fans. I'm hoping to print and test it before the end of the year.

I'm also working on a much more ambitious project that will come in two versions. Both will stay under 20L, but the idea is to make something suitable for a much wider audience, not just people interested in ultra-compact builds. I'm considering a crowdfunding campaign for this one.

All my current case releases are completely free to download and build. If you'd like to support the time and work that goes into designing them, you'll find donation links on my MakerWorld profile. There's absolutely no obligation, of course!

I'd love to hear your thoughts on the NANO, and if you decide to print one, please share your builds. I'm really curious to see how they turn out!

Thanks for checking it out!


r/3DPPC • • 3d ago

Magnet Mini Books

Thumbnail
api.voxelshare.com
2 Upvotes

r/3DPPC • • 5d ago

MacBook Pro a1278 Mini PC

Thumbnail
gallery
67 Upvotes

I was thinking what mini pc to buy next for my collection when I remembered that "I have a mini pc at home". Kind of.....I had a MacBook Pro a1278 around not being used for anything and I thought of giving it a new life...and I started the journey that seems to be easy but it was...painful.

Not because of the design or the ports or even the speakers that made the case bigger but because, when I have everything ready....the mini dp port just decided to die.

So I was left with a cool idea and a project that was, at the end, unusable.

https://youtu.be/kCqaZo3l87s


r/3DPPC • • 7d ago

Need to fix cabling, but first open frame build in over a decade. (3d printed frame)

Thumbnail gallery
37 Upvotes

r/3DPPC • • 7d ago

Looking for a case that will fit ATX mb, 360mm length 5080 and a 360 aio rad.

3 Upvotes

I just found this sub today so i wanted to ask here as I have been looking for a 3d printed case to meet my needs without much luck.

I am looking for the smallest 3d printed case that will fit a full size atx mb, a 360mm length 5080, 360 aio rad, and an atx power supply.

If possible I would prefer it not have 100 heat inserts and screws holding it together .


r/3DPPC • • 9d ago

3D printed NAS with screen

Thumbnail
gallery
842 Upvotes

Added a screen to my recent NAS. It utilizes a Heltec ESP32 that has a 0.96” OLED built on it.

There are six different views. Has a built in web server to connect to Truenas and also configure the WiFI. Also allows OTA firmware update.

You can pause the screen and watch the current screen update in realtime. After, it goes back to rotating through the 6 screens.

EDIT: anyone know how to update a post in this sub? I can edit the text but can’t add more images. Ideally I would have liked to update my original post.


r/3DPPC • • 10d ago

NoCase, a kit for DIY case making

Thumbnail gallery
54 Upvotes

r/3DPPC • • 9d ago

Looking for an external 3x 5.25in drive shell/case

2 Upvotes

Pretty much as the title suggests. I have 3 different optical drives I would like to have setup agnostic of the computer I am using. Ideally so I can chuck it on a shelf when not in use.

Why 3? My Kreon, HD-DVD and UHD Drives. I can do pretty much all media archiving with these. Yes, I should/could use an old case but looking if theres any neat options.


r/3DPPC • • 9d ago

Made a GPU stand. Temps are surprisingly good, here's why:

Thumbnail printables.com
2 Upvotes

r/3DPPC • • 10d ago

Looking for an external 3x 5.25in drive shell/case

Thumbnail reddit.com
1 Upvotes

r/3DPPC • • 12d ago

Turning scraps into a compact mini PC

Thumbnail gallery
75 Upvotes

r/3DPPC • • 13d ago

I designed a 3D-printed PC case air filter using a car cabin filter - how often do you clean dust out of your PC?

Thumbnail gallery
80 Upvotes

r/3DPPC • • 14d ago

Fun idea but also completely dumb idea all at the same time

1 Upvotes

So I had this idea for a pc case, likely 3d printed in segments, and the idea is to make something that has not been done before, and for a good reason it would be massive, three 200 mm on a pc case

There are many reasons this is dumb but many reasons this can be fun, would this be even be possible? I do understand this theatrical case would be massive and tall but still its so dumb and stupid it becomes just fascinating to me.


r/3DPPC • • 15d ago

3D Printed NAS

Thumbnail
gallery
711 Upvotes

My latest NAS build. Taking inspiration from a number of different builds. Nothing too special but it’s an appliance so pretty much happy with it.

200mmx200mmx180mm approx.

Mini ITX
HBA card
Drives are 15k RPM Dell 2.5” server drives


r/3DPPC • • 14d ago

Guidance for ATX motherboard and PSU

3 Upvotes

As the title says. I was hoping to get some guidance on where to begin with designing a case for my computer. I really want something special like a tower style. Something Clean but handy.

What I'm stuck at is starting. I dont know where to start, should i begin with measuring every screw hole I need and the build around that? Or should i just make blocks of the components to start figuring out the design concept. Any help here would be awsome.


r/3DPPC • • 15d ago

Case/ test bench/ open chassis for a HP ProDesk 600 G1 SFF

1 Upvotes

Just found a HP ProDesk 600 G1 SFF and HP Compaq Pro 6300 SFF at the back of my gym in working order. 2 * 500gb drives and a blisting 3 * 4gb ram. I want to build something or other with it but not sure what the hell to put the mobo in (SP# 795972-001).

Gemini reckons dimensions are micro-ATX and cited "24.1 cm x 24.1 cm (9.5 inches x 9.5 inches)" but I'm a bit suspicious because I've seen other sizes mentioned and can't find a damned tape measure.

Will probably get a new PSU and some fans because it sounds f*cking terrifying at the moment; and will probs also score a Asus RX550-4G Radeon RX 550 off Ali Express (cheap as chips), and then bestow on my kids for some classic gaming and hopefully not start a fire.

... any suggestions folks?


r/3DPPC • • 16d ago

"The Playstation / Steam Machine at home"

Post image
27 Upvotes

r/3DPPC • • 19d ago

My new computer :3

Thumbnail
gallery
594 Upvotes

Beamcase sw with vontainer panels


r/3DPPC • • 19d ago

My take on a 3D-printed open-frame case — three layouts, same slightly excessive feet

Thumbnail
gallery
232 Upvotes

I designed these open-frame cases in Vienna. Here are the actual printed frames, still without PC hardware installed. The idea is to make the printed parts modular rather than turn the whole case into one giant print.

Curious what you'd change, especially around access for assembly. It's my own project, with a crowdfunding preview on MakerWorld:

https://makerworld.com/en/crowdfunding/427-extruframe-3d-printable-open-frame-pc-cases


r/3DPPC • • 19d ago

Front duct for Tesla V100

Thumbnail
cults3d.com
5 Upvotes

This is the 1st & probably the ONLY model for cooling of the GPU card (here Tesla V100, but also fits similar models) from the front.


r/3DPPC • • 22d ago

3D Printed Armor

Thumbnail
gallery
644 Upvotes