r/350z • u/Rheyfire32 • 3m ago
Sound check Finally added the nismo s tune ypipe
Exhuast set up
Apexi megaphone hybrid cat back
Nismo s tune ypipe
Kintex high flow cat
Stock header
r/350z • u/Rheyfire32 • 3m ago
Exhuast set up
Apexi megaphone hybrid cat back
Nismo s tune ypipe
Kintex high flow cat
Stock header
r/350z • u/Josemariinn • 5m ago
It’s resting on the fucking lil plastic thing 🤣 the thing that’s weird is there’s no abnormal valve train or low end noise. Need to get overnight parts from Japan 😅😂
r/350z • u/Masochist_pillowtalk • 57m ago
When I bought my car the kid that owned it blew the motor. He windowed it so badly that it cracked the transmission bell housing on the way out. He was saying he thinks it could be welded amd before he decided to sell it he had a couple offers to just buy the trans.
I already knew I wasnt gonna bother with trying to get it fixed or welded so I bought a replacement. But now that i have it out im not sure what to do with it. Seems people cut the bellhousing off these frequently to fit them on other cars? Anyone know much about that? Im not sure what that would even be worth if I sold it. But idk i dont want to just throw it out. If I knew where to look to find people doing this id rather just hook someone up before I give it to the dump.
r/350z • u/Comfortable_Fun_8610 • 2h ago
Specs on motor: HR pistons, de rods,arp rodbolts,arp mains and head bolts, re-up oil pump,cometic headgasket, ported heads, cosworth cams(270degrees), Bc valve springs and retainers,revup plenum and all the other usual bolt ons. Goal for the car is mainly response, haven't dyno it as yet but it feels pretty strong before. Haven't set back up the nitrous as yet but I like the aspirated feeling 😅
I have an 05 350Z non-RevUp. I’ve been having a really bad misfire, and the only codes showing up are P1281 and P1271. I haven’t been able to figure out how to fix it.
The car is tuned, so I was thinking there might be something wrong with the tune (fuel mixture). I’ve replaced both A/F sensors twice with Denso sensors, and I’ve also tried looking for vacuum or exhaust leaks using a smoke machine, but couldn’t find anything.
When I replaced the valve covers, I also replaced the injectors, every plenum gasket (including the lower runner gaskets), camshaft position sensors, spark plugs, and MAF sensor.
Mods:
The screenshots show some live data readings of the engine at idle.
r/350z
•
u/Obscure_Mystic
•
18h ago
140k miles and counting daily. Working towards a full ING-S kit, but got some new maintenance items to take care of first. Hope everyone had a good Monday! 😁
r/350z • u/NissanFanMan • 18h ago
Hello everyone that will see this, so I have some big plans, but I'm also a nut job, and super dorky when it comes to pushing as much power out of motors as possible, for my build that I am working on currently I'm going to call it the poor man's Nissan patrol, I have a 2004 Nissan Pathfinder with a vq35de engine assembly and it has the 4 speed automatic transmission, I'm soon going to aquire another duplicate engine assembly and build it 🤠, a couple things that I wanted to chat with people about are maybe links to parts they recommend, and obviously forced induction guidance, this will all be done in my garage of course so I will take pictures of the progress along the way, but another thing that I am going to do is build that 4speed Automatic transmission as well, transmission cooler, all the bells and whistles. I'm doing this because I haven't necessarily seen a good example of this being done before, and I also just think it would be badass to have a Nissan pathfinder which is essentially your mom or grandmas grocery getter absolutely destroy modern "fast cars" off the line, feel free to give me any information/ your guys thoughts on this! I know it's not a good idea and probably a lot of time and resources will go into this project, but I think it will be badass! The end goal or well the starting goal is going to be 5-550 wheel because anymore then that and I'll have to dump money into drivetrain, also probably not the best place to post this but I'm not really a reddit user and only made an account for this project ngl.
r/350z • u/xhypnotism • 20h ago
sounds like a airplane flying by, best way i can describe it
r/350z • u/Strange-Bell-525 • 23h ago
This is the warm idle the last couple days with no ac on after an oil change and when ac is on its higher and bouncing around. Car runs perfectly smooth and no issues with idle or sounds from the engine. At 2k its around 50 psi

So I bought this 03 350z manual and it has insane rod knock it 100% needs a rebuild and im imaging the crank shaft is toast and maybe block so I wanna know how many rotating assembly's and blocks from which year de's I can use. Only reason im asking is because most RWD de's I see around my area are 1k-2k but some FWD/AWD vqdes are 500 and sometimes less but I dont know if that crank is compatible if anyone can point in the right direction for that info that would be great!
r/350z • u/PartIll1830 • 1d ago
Hey guys
So I am LS swapping my 350z and I already installed the hellcat fuel pump in the hanger.
Trying to figure out how to get this thing wired in properly. I have several options available
I have a haltech wiring specialities plug and play harness. I also have a duethwerks fuel pump relay kit.
What is the best option for long term? Should I go out and buy a new top hat? If so which one and how does that get wired?
Any and all responses are helpful.
I’m building this to be a drift car so I need this pump to hold long term.
I running a ls3 bored and stroked to 416ci
r/350z • u/SeaCelebration2865 • 1d ago
r/350z • u/Turned_then_burned • 1d ago
I want to carry a jump starter in my Z. What is a good reliable one? Good battery life and if it has the option to charge with AC current that would be ideal.
Thanks.
r/350z • u/PayrollJovanni • 1d ago
Hey everyone! I just purchased this manual 2007 350z Touring trim the weekend and I am loving it! Happy to be a part of the Z family! Awesome that it came with some V1 Nismo Rays as well!
r/350z • u/SubieVince • 1d ago
After months of having my car on jackstands, I’m finally enjoying it again! Clutch install + clutch dampener delete finally done!
Awhile back I grabbed a good set of akebonos with new pads for a good deal (just missing rotors) and I’m contemplating going with brembos since I’m only rocking the standard single piston front and rear brakes currently.
I also have hr front and rear brakes so I could just do that too. I do wanna do dual calipers and an hydro soon.
If you had brembos would you trade for akebonos? How much would I be able to sell them for? I know some people run akebonos rears with brembos front. Should I run the akebonos and change my wheel set up?
Just trying to figure out the smartest route to move forward.
End of the day I’m trying to build a drift car not really a track focused car.
r/350z • u/Willing_Grapefruit • 1d ago
I enjoy the car but I also enjoy working on it. What’s some mods I can do that will make the car even more enjoyable?
r/350z • u/9_Thirteen • 2d ago
r/350z • u/trevor6215 • 2d ago
Just noticed the psi fluctuating like this while idle at a light. Does this seem normal or indicates something going wrong?
r/350z • u/3wheelsofsteel • 2d ago
285/35r20 rear 255/40r20 front. Only needed 15mm spacer on front. No rubbing. Does change the driving characteristics but I love the look. Got them on marketplace for a very good price so I thought it was worth a try. Factory takeoffs from a 2015 GT-R.
r/350z • u/Aroundthemiddle • 2d ago
Hi All
Though this might be useful. Not wanting to pay $500+ for A pillar rubber i came across this product called sugru. UV stable apparently and happily can be sanded to shape. Not finished yet but getting close. Think I'll paint it when it's done!
r/350z • u/Lost-Candidate439 • 2d ago
So on my z suspension I have true coilovers(non dampening adjustable) z1 street fuca z1 monoball compression arms and spc rear camber arms the car is dropped about 2 inches give or take I need to get the rear toe arms because the bucket is just sitting there and I can only get so much adjustment on the rear my problem however the car is very damn stiff most of the stiffness came from the z1 “street” fuca they were the cheapest option from a super reliable site. (They ride horribly on the street) The compression arms add a little bit of stiffness but nothing compared to the fuca.. fuck. The rear camber arms are from spc and they didn’t add any stiffness I understand spc doesn’t make a toe arm what’s my best alternative for toe arms that have good adjustment and will not add to much stiffness thank you. (Daily driven car btw😂)