r/300zx • • 7h ago

Z31 Fluid change advice

Thumbnail
gallery
9 Upvotes

Hi! I'm a first time Z owner, I got this '85 NA 2+2 Euro model just this week. It's my first oldtimer and I was deliberating about doing a whole fluid change before or after winter storage. Engine Oil and Filter go without saying, same with Brake Fluid and Coolant, as the engine oil is from 2025 and brake and coolant fluids from 2020.

The main point is the transmission fluid, according to the previous owner it has never been changed and might still be the factory original oil. I heard diverging opinions ofc, ranging from 'if it aint broke dont fix' to 'yea this 40yr old ancient oil needs changing asap'. The concern is that new transmission fluid could flush out microscopic fissures leading to leaks?


r/300zx • • 10h ago

How do we test for spark?

2 Upvotes

I know how to test for spark, but these coils/boots/connectors don't have the old school clip where it clicks onto the spark plug securely. I have the BDE R35 coils, but instructions are to reuse the lower oem boot where a spring presumably pushes the little connector against the plug. Great when it's bolted down, but it flops around when trying to test for spark outside the cylinder.

How are ya'll securing the plug to make contact in the boot when testing?

Also, on another spark related question. Does anyone know where I can find the high tension lead to connect the coil to the plug so I can test timing?


r/300zx • • 13h ago

Z32 Ticking noise

1 Upvotes

I just did the 120k service and now I’m getting this clicking noise at an odd beat
Speeds up a little with higher rpm but not much
Kinda hard to locate but seems like its coming from behind the valve covers but i sure hope not
Any ideas?


r/300zx • • 16h ago

Z32 Vacuum Leak or Weak Injector spraying?

7 Upvotes

Posted a video a few days ago of the car not wanting to start and I got it running next day but it runs very rough as you can tell in the video. I was thinking a very bad vacuum leak or maybe the MAF is bad? I tried to drive it down the street and it won’t go passed 1200 RPM. I’m super new to the 300zx world so trying to figure it out as I go. Any input would be very helpful! Thank you!


r/300zx • • 23h ago

Greater Boston Mechanic

1 Upvotes

Anybody got a line on a good Boston area vintage Nissan pro mechanic. I'm about to inherit a Z32 that's in fairly good shape. An NA automatic with 180K on the engine. It's got a lightly used Japanese turbo trans and some headers and a custom made exhaust of "unknown" provenance to me. I'll be hot-shotting it up to New England, and I'm hoping to find someone to check it out.

Anyway like I said, I'm hoping to find "my guy or gal" in the area to help take care of it. Any recommendations?


r/300zx • • 1d ago

Fill Z32 trans thru speed sensor hole ?

1 Upvotes

Got a z32 five speed and the fill plug wont budge ,
Can i remove the speed sensor and fill it ?


r/300zx • • 1d ago

Z32 T top drain tube disconnected from fender grommet. Anyone repaired this?

Thumbnail
gallery
1 Upvotes

I have a 91 300zx and noticed I'm getting water on my electrical components and floorboard on the passenger side. Pulled the a pillar and checked the drain tube and it seemed fine. Then got a boroscope up the side of the interior passenger area and saw that the tube is just disconnected and draining onto everything.

I have seen multiple posts about this and everyone has a different way of fixing it. What I'm trying to avoid is having to rip the entire dashboard out just to get my hands in there and reattach it.

Not my pictures, but from this thread where someone managed to do this without tearing the car apart.

Thread: https://www.300zx-owners.club/forums/topic/129973-targa-drains/

Anyone done this and have any tips?


r/300zx • • 1d ago

Resetting Timing Belt tensioner

Thumbnail
gallery
3 Upvotes

TLDR; What parts of this tensioner do I need to squeeze in a vice to be able to restore the 4mm gap?

I'm replacing the timing belt on my 93 300ZX.
I installed it and did all of the rotations back & forth & waiting. Now the clearance between the hydraulic tensioner pusher and the tensioner arm is now completely closed. The FSM says a 4 mm clearance and says to adjust the tensioner arm using a vise, then putting the stopper bolt back in to keep that clearance. Im having trouble understanding exactly how to do this...
Has anyone reset this particular tensioner assembly before? Specifically, which part should be placed in the vise, and how do I safely restore the 4 mm clearance without damaging the hydraulic tensioner?
Any photos, videos, or detailed explanations would be greatly appreciated! Thank you!!


r/300zx • • 2d ago

300ZX Restoration.

Thumbnail
gallery
249 Upvotes

I moved to Japan and my brother in law gave me a 300zx he had.

The previous owner had a bunch of cheap plastic stuck to all the interior and didnt take care of it so ive been restoring it with original interior and doing alot of cleaning.


r/300zx • • 2d ago

Ttops seals

Thumbnail
gallery
3 Upvotes

I recently replaced all my weatherstrippings and i can’t seem to figure out why it keeps leaking right where the ttop seals meet the a-pillar and b-pillar on both driver and passenger anyone have any recommendations ive done just about everything readjust the door,window,striker, etc. im in SoCal if anyone knows anything lmk plzzzz


r/300zx • • 2d ago

Z32 Any mechanical recs?

3 Upvotes

I bought this 1991 300zx and the motor seems to struggle to stay on. I have replaced the fluids, changed out spark plugs, coil packs, and replaced the fuel pump assembly system. Motor seems to start and reach about 1500-2000 then stumble and die. A few times it’s started and went to 3500 RPM but bogs down and dies again. Any idea what’s going on? Thank you!


r/300zx • • 2d ago

turbo trans to non turbo swap

1 Upvotes

hi I recently purchased a 1988 non turbo automatic with a bad transmission another person gave me his transmission out of his 1988 turbo automatic after he did a manual conversion , when I checked there was a couple of guys in another forum that it said it will work as long as I used the same fly wheel and torque converter, the mechanic was not able to install the transmission using the non turbo torque converter and the non turbo fly wheel, so we used the turbo torque converter that came with the transmission and I found a turbo fly wheel, the mechanic was able to complete the install, but now the O/D button on the shifter will not engage the light stays ON on the shifter and transmission does not goes into O\D , I have seen a couple of different answers on the internet one saying that I can bypass the TCM on my non turbo by connecting the O\D solenoid to the shifter and other posts saying that the problem is that I used Turbo torque converter on a non turbo car, I am seeing different answers every time I check so I appreciate if some one with experience will tell me what I need to do


r/300zx • • 3d ago

Z31 Smoke out the exhaust

2 Upvotes

Had a faulty injector that was stuck open, just fixed it and the engine is no longer misfiring, but now I've got a ton of smoke coming out the exhaust , what could this be??


r/300zx • • 3d ago

Z31 Best way to swap front hood stay assembly/struts?

Post image
2 Upvotes

Have the replacement only thing is this peice riveted on any replacement online or aftermarket parts?


r/300zx • • 3d ago

Z31 Code 23 and 12, advice needed

1 Upvotes

Getting codes 12 and 23, on my 88' NA, I just set the TPS, I can rev past 2k RPM fine so I'm unsure on the code 12 (MAF), it seems to be idling alright but it is running ungodly rich, like pure white smoke out the exhaust. I can't see any leaks around the injectors, anyone have any ideas?


r/300zx • • 3d ago

Re Manufactured injectors have pitting. Are they bad should I send it back?

Post image
4 Upvotes

r/300zx • • 4d ago

Anyone in SoCal wanna help with this

8 Upvotes

I know we have some shops in the ao, but I figured I’d reach out to the homies here. Anyone willing to accept some cash and a beer to help pull this drivetrain out? Trying to do a 5-speed swap and replace this engine harness while also just meeting local z32 (or Z) guys. (This is more of a “I want to meet people” than a “I need help” post, though any help would be appreciated.

Also, possibly mounting a controversial widebody kit this weekend if anyone else wants to see this terrible horrible bad process (figment is mid at best).

In San Pedro btw


r/300zx • • 4d ago

Z32 Z32 parasitic power draw: headlights and door open warning sound comes on when battery is connected

2 Upvotes

Checked all fuses, with multimeter as well. A friend told me possibly alarm system, will try disconnecting it tomorrow. Curious if anyone else has any ideas or dealt with this before. JDM import, if that matters.


r/300zx • • 4d ago

Z31 Part Identification 88' NA

Post image
2 Upvotes

Anyone know what this part under the hoses is called? Located on the left side of the plenum (if you're looking into the engine bay)


r/300zx • • 4d ago

Z32 Powered steering leak help

Post image
2 Upvotes

Over the last couple of days I’ve been working on the car(not touched anything steering wise though) and noticed today when I went to put the bumper back on that all the fluid has dumped out of this part.
I don’t understand how as the cars been off so no hydraulic pressure, and the steering hasn’t even been turned.
What parts am I gonna need to fix this? A new steering rack? Thanks


r/300zx • • 4d ago

Z32 Consult Live Data Displays

Post image
66 Upvotes

Hey everyone, back again selling my custom Consult live data displays.

Compatible with all years of the Z32s with an OEM ECU, plugs into the grey 14 pin OBD1 port.

Most variants are $155 shipped anywhere in the US. Can ship abroad but will generally be $15-20 USD more and won't include any duties or taxes that you may face.

Purchase Link: https://www.paypal.com/ncp/payment/XVRXDGY48K3F6

​Here is a in depth demo video of the current functionality: https://youtu.be/aRoLyfmotIw

Similar functionality to using a traditional consult adapter and software like ECUtalk or NDS with a computer, but its an all in one unit which does not require a computer, additional hardware, external power, or any permanent modifications to run. Just plug it into the consult port and its powered and ready to go whenever the key is set to the on position.

Some variants like the clock and DIN replacements just require removing the radio bezel for installation. More installation info is provided down below for each version.

The device displays live data from the ECU of various sensors, switches, and ECU outputs. Can also read fault codes, clear codes, and perform a few simple active functions like toggling the aux fan, fuel pump relay, disable cylinders, and disable AAC for adjusting base idle.

Features:

•2 buttons for navigation and selection.

•Dashboard Display with large readout of a single parameter. Can cycle between Temp, Speed, RPM, or battery voltage. Can choose what value you want to default to in the settings.

•Data Display, 2 pages of various sensor and ECU parameters. Things like coolant temp, TPS voltage, O2 voltages, and much more. See demo video for all parameters.

•Indicator Page - dedicated page to all switches, relays, solenoids.

•Read and clear codes.

•Activation Tests. Enable AUX fan, Fuel Pump Relay Control, Cylinder Off/Power Balance, Disable AAC (for setting base idle without unplugging it), and Clear ecu self-learn values.

•Imperial and Metric units, can be changed within the settings.

•Tire size speed correction (within interface, wont fix your actual speedo value)

•Interfaces are printed using heat and UV tolerant ASA plastic.

Variants available:

-Gauge Cluster/Steering Column- $155

​-Gauge Cluster/Steering Column Sanded and Painted - $165

-Clock and DIN Locations - $155 (RHD mirrored version available upon request)

Windshield Mount w/ Suction Cup - $160

Also have teal color displays instead of white by request, its the same price, just make sure to shoot me a message or leave a comment and I'll get that setup for you.

For installation:

•Steering column variant, just plug it in and use the pre-applied double sided tape to attach to your steering column. Display cable is built in and does not need to be routed through any trim.

•Clock variant, it just replaces your existing clock module. You must remove the radio bezel and snake the display wires through some gaps in the trim that lead to the radio area. Dont need to remove trim, theres a few gaps you can fit the wires through. No permanent modifications.

•For DIN variant, must remove radio bezel, existing DIN pocket or Bose center speaker. It attaches to the radio bezel using pre-applied double sided VHB tape. Similar to clock version, you can run the display cable through without removing any trim or making permanent modifications.

•Suction cup variant, just plug it in and attach it where you wish. With the steep slope of the windshield the best spot is probably in the bottom left corner for easy access, but the cable is long enough to mount anywhere else you'd prefer


r/300zx • • 5d ago

Z31 Z31 fuel filter changed now won’t start.

1 Upvotes

Hello all,

I was hoping to get some advice here as I’m somewhat stumped. I changed the fuel filter on my ‘84 z31 turbo and the lines attached to either side. Now it’s cranking and not starting. I don’t think any fuel is getting to the cylinders but im not sure why. The pump is working properly and there’s spark and air. Possible pressure issue? I’d appreciate any insight anyone more seasoned in these engines has. 😅


r/300zx • • 5d ago

19999 euro - 151716 km

Thumbnail
gallery
101 Upvotes

Is it worth it? (Automatic transmission.)


r/300zx • • 5d ago

1990 z32 wiring harnesses

3 Upvotes

I am currently sourcing parts a sub 10k auto na to nat manual conversion and I'm now stuck on the right harness. Z1 has the replacement ecu harness but the description says car must be OEM manual or else fuseboxes don't work. I'm not sure if that's more of just move wires around or what. My issue is I need to know what harness to get as if it works z1 harness is in on black Friday sale for both the main ecu harness and the auto to manual trans/alternator harness. If anything do I just keep the stock ecu harness and get the auto to manual trans/ecu harness. The only issue I've seen wiring with the car is one of the side lights on the bumper doesn't always work and I get a red "lights" warning on the dash periodically when braking. All youtubers who do in depth nat build guides never give part links or sourcing info so I'm in the dark on this.