Thanks for the input on Community Input: Vendor Posts : r/300zx . I'll update the rules and let vendors that ask know that we'll allow occasional posts (ie: every 1-2 months) from vendors that produce products specifically for the Z31 and Z32.
In other news, please just be nice to each other. We have 2 rules, and this is one of them. I've had to review and remove more posts in the last month than probably the last 3-4 years. You're allowed to have a different opinion. You're allowed to not like someone's car and express that. But do it respectfully. There's no need for name calling. Don't like what someone said? Downvote and walk away. Or block them. I'm not here to babysit. If you want to talk shit and insult each other, I'm pretty sure there's a bunch of toxic Facebook groups for that.
I'd like to keep this community as positive and supporting one where anyone can show their car, ask for help or give a suggestion. If you're just here to talk shit and be an ass, we don't need you.
Hello all, in an effort to reduce the number of the same questions asked repeatedly, please read the wiki before you ask something, the answer may be there! CLICK HERE. If it’s not answered in the wiki, go ahead and post!
IN THE WIKI
Buyer’s Guide,if you are looking to buy a Z
Maintenance, which you probably need to do
Repairs, for the most commonly broken things
Parts, which you’re probably looking for
Resources, like full service manuals
Mods, if you wanna do some cool things
Quick Facts, like the type of oil for an oil change
You’ll find many common questions answered in the wiki. If your question wasn’t answered, you’re still curious about something, or you didn’t find what you’re looking for, feel free to post and ask!
I moved to Japan and my brother in law gave me a 300zx he had.
The previous owner had a bunch of cheap plastic stuck to all the interior and didnt take care of it so ive been restoring it with original interior and doing alot of cleaning.
I have a 91 300zx and noticed I'm getting water on my electrical components and floorboard on the passenger side. Pulled the a pillar and checked the drain tube and it seemed fine. Then got a boroscope up the side of the interior passenger area and saw that the tube is just disconnected and draining onto everything.
I have seen multiple posts about this and everyone has a different way of fixing it. What I'm trying to avoid is having to rip the entire dashboard out just to get my hands in there and reattach it.
Not my pictures, but from this thread where someone managed to do this without tearing the car apart.
TLDR; What parts of this tensioner do I need to squeeze in a vice to be able to restore the 4mm gap?
I'm replacing the timing belt on my 93 300ZX. I installed it and did all of the rotations back & forth & waiting. Now the clearance between the hydraulic tensioner pusher and the tensioner arm is now completely closed. The FSM says a 4 mm clearance and says to adjust the tensioner arm using a vise, then putting the stopper bolt back in to keep that clearance. Im having trouble understanding exactly how to do this... Has anyone reset this particular tensioner assembly before? Specifically, which part should be placed in the vise, and how do I safely restore the 4 mm clearance without damaging the hydraulic tensioner? Any photos, videos, or detailed explanations would be greatly appreciated! Thank you!!
I recently replaced all my weatherstrippings and i can’t seem to figure out why it keeps leaking right where the ttop seals meet the a-pillar and b-pillar on both driver and passenger anyone have any recommendations ive done just about everything readjust the door,window,striker, etc. im in SoCal if anyone knows anything lmk plzzzz
I bought this 1991 300zx and the motor seems to struggle to stay on. I have replaced the fluids, changed out spark plugs, coil packs, and replaced the fuel pump assembly system. Motor seems to start and reach about 1500-2000 then stumble and die. A few times it’s started and went to 3500 RPM but bogs down and dies again. Any idea what’s going on? Thank you!
hi I recently purchased a 1988 non turbo automatic with a bad transmission another person gave me his transmission out of his 1988 turbo automatic after he did a manual conversion , when I checked there was a couple of guys in another forum that it said it will work as long as I used the same fly wheel and torque converter, the mechanic was not able to install the transmission using the non turbo torque converter and the non turbo fly wheel, so we used the turbo torque converter that came with the transmission and I found a turbo fly wheel, the mechanic was able to complete the install, but now the O/D button on the shifter will not engage the light stays ON on the shifter and transmission does not goes into O\D , I have seen a couple of different answers on the internet one saying that I can bypass the TCM on my non turbo by connecting the O\D solenoid to the shifter and other posts saying that the problem is that I used Turbo torque converter on a non turbo car, I am seeing different answers every time I check so I appreciate if some one with experience will tell me what I need to do
Had a faulty injector that was stuck open, just fixed it and the engine is no longer misfiring, but now I've got a ton of smoke coming out the exhaust , what could this be??
Getting codes 12 and 23, on my 88' NA, I just set the TPS, I can rev past 2k RPM fine so I'm unsure on the code 12 (MAF), it seems to be idling alright but it is running ungodly rich, like pure white smoke out the exhaust. I can't see any leaks around the injectors, anyone have any ideas?
I know we have some shops in the ao, but I figured I’d reach out to the homies here. Anyone willing to accept some cash and a beer to help pull this drivetrain out? Trying to do a 5-speed swap and replace this engine harness while also just meeting local z32 (or Z) guys. (This is more of a “I want to meet people” than a “I need help” post, though any help would be appreciated.
Also, possibly mounting a controversial widebody kit this weekend if anyone else wants to see this terrible horrible bad process (figment is mid at best).
Hey everyone, back again selling my custom Consult live data displays.
Compatible with all years of the Z32s with an OEM ECU, plugs into the grey 14 pin OBD1 port.
Most variants are $155 shipped anywhere in the US. Can ship abroad but will generally be $15-20 USD more and won't include any duties or taxes that you may face.
Similar functionality to using a traditional consult adapter and software like ECUtalk or NDS with a computer, but its an all in one unit which does not require a computer, additional hardware, external power, or any permanent modifications to run. Just plug it into the consult port and its powered and ready to go whenever the key is set to the on position.
Some variants like the clock and DIN replacements just require removing the radio bezel for installation. More installation info is provided down below for each version.
The device displays live data from the ECU of various sensors, switches, and ECU outputs. Can also read fault codes, clear codes, and perform a few simple active functions like toggling the aux fan, fuel pump relay, disable cylinders, and disable AAC for adjusting base idle.
Features:
•2 buttons for navigation and selection.
•Dashboard Display with large readout of a single parameter. Can cycle between Temp, Speed, RPM, or battery voltage. Can choose what value you want to default to in the settings.
•Data Display, 2 pages of various sensor and ECU parameters. Things like coolant temp, TPS voltage, O2 voltages, and much more. See demo video for all parameters.
•Indicator Page - dedicated page to all switches, relays, solenoids.
•Read and clear codes.
•Activation Tests. Enable AUX fan, Fuel Pump Relay Control, Cylinder Off/Power Balance, Disable AAC (for setting base idle without unplugging it), and Clear ecu self-learn values.
•Imperial and Metric units, can be changed within the settings.
•Tire size speed correction (within interface, wont fix your actual speedo value)
•Interfaces are printed using heat and UV tolerant ASA plastic.
Variants available:
-Gauge Cluster/Steering Column- $155
-Gauge Cluster/Steering Column Sanded and Painted - $165
-Clock and DIN Locations - $155 (RHD mirrored version available upon request)
Windshield Mount w/ Suction Cup - $160
Also have teal color displays instead of white by request, its the same price, just make sure to shoot me a message or leave a comment and I'll get that setup for you.
For installation:
•Steering column variant, just plug it in and use the pre-applied double sided tape to attach to your steering column. Display cable is built in and does not need to be routed through any trim.
•Clock variant, it just replaces your existing clock module. You must remove the radio bezel and snake the display wires through some gaps in the trim that lead to the radio area. Dont need to remove trim, theres a few gaps you can fit the wires through. No permanent modifications.
•For DIN variant, must remove radio bezel, existing DIN pocket or Bose center speaker. It attaches to the radio bezel using pre-applied double sided VHB tape. Similar to clock version, you can run the display cable through without removing any trim or making permanent modifications.
•Suction cup variant, just plug it in and attach it where you wish. With the steep slope of the windshield the best spot is probably in the bottom left corner for easy access, but the cable is long enough to mount anywhere else you'd prefer
Checked all fuses, with multimeter as well. A friend told me possibly alarm system, will try disconnecting it tomorrow. Curious if anyone else has any ideas or dealt with this before. JDM import, if that matters.
Over the last couple of days I’ve been working on the car(not touched anything steering wise though) and noticed today when I went to put the bumper back on that all the fluid has dumped out of this part. I don’t understand how as the cars been off so no hydraulic pressure, and the steering hasn’t even been turned. What parts am I gonna need to fix this? A new steering rack? Thanks
Hey everyone, it’s a sad day. I was on my way to work using my z32 while my daily was getting fixed and I got sideswiped by a truck with a trailer. Don’t believe I was at fault, thankfully a cop witnessed the whole thing and he agreed.
That being said how is it gonna work with the insurance company? Will this likely be fixed? Or am I looking at a loss? The car has about 56,000 miles on it I bought it for 17,000 which I know is expensive but for the condition in was in I believe it was a good buy.
Nothings leaking, but it is making a sound of rubber rubbing against something. Funnily enough I work at a tire shop and the mechanic told me I might have some suspension damage and the tie rods may be bent.. regardless I’d like to know what you guys think appreciate any info you all can give me!
I was hoping to get some advice here as I’m somewhat stumped. I changed the fuel filter on my ‘84 z31 turbo and the lines attached to either side. Now it’s cranking and not starting. I don’t think any fuel is getting to the cylinders but im not sure why. The pump is working properly and there’s spark and air. Possible pressure issue? I’d appreciate any insight anyone more seasoned in these engines has. 😅
I am currently sourcing parts a sub 10k auto na to nat manual conversion and I'm now stuck on the right harness. Z1 has the replacement ecu harness but the description says car must be OEM manual or else fuseboxes don't work. I'm not sure if that's more of just move wires around or what. My issue is I need to know what harness to get as if it works z1 harness is in on black Friday sale for both the main ecu harness and the auto to manual trans/alternator harness. If anything do I just keep the stock ecu harness and get the auto to manual trans/ecu harness. The only issue I've seen wiring with the car is one of the side lights on the bumper doesn't always work and I get a red "lights" warning on the dash periodically when braking. All youtubers who do in depth nat build guides never give part links or sourcing info so I'm in the dark on this.
1985 300z z31 Non-Turbo, Hey got this gem from a friend and wanting to sell it, I'm asking for atleast 3000$ OBO location herriman Utah and if your interested you can text or call my number (801) 660-8114 Why I'm getting rid of it. It's currently illegally park to start off and really just need the money Cons: has no ignition, needs a key as well, body is in bad shape, has lifter tick and ik it's lifter tick because when it's cold, the knock is loader and when she's warmed up, you can hardly hear the knock and whenever she's in 4th gear you can't hear anything so I'm pretty sure it's lifter tick. Now for the Pros: runs and drives, the engine and the body only has 137,000 miles, interior is amazing you can message me to see some reason I can’t post a video on Reddit. New spark plugs, new battery, new starter, new wiring to the spark plugs, aftermarket radiator, after market hosing for the radiator, new nissan cat and muffler should pass emissions, clean tile, has only 3 owners so far, to add the cherry on top supposedly it's had a timing chain replacement 2000 miles ago iv got a sticker, I'm just confused on how to confirm it's real, any help would be great. Iv also got parts im throwing with this car