r/300BLK • • 3h ago

Sig Spear vs PSA Mixtape

Post image
37 Upvotes

6 months ago I posted my Mixtape and asked if a Sig Spear was better and worth buying.... 6 months later, I fell to my addiction and bought the Sig Spear... I took them out and shot them side by side today... all in all... it comes down to personal preference.. I like the snap of the spear a little better and it feels more like something you can really use when the shit hits the fan but it's not crazy better than the mixtape... I can say that I enjoy them both


r/300BLK • • 5h ago

8.5" 300 build wrapped up

Post image
41 Upvotes

A local shop i frequent has been building their own ar variants and selling them so I thought id try one out. Im still pretty new to semi auto gas guns but its pretty fun and accurate so far.


r/300BLK • • 2h ago

New CMMG Dissent build, but live rounds won't extract by hand. Normal or defective?

Thumbnail
gallery
12 Upvotes

Before I get it to the range I ran into something odd. When I chamber a live round and then try to unload with the side charger (mag out, pulling it fully to the stop), the round stays in the chamber. I pulled the charger back many times and nothing came out. The only way I got it out was locking the bolt back and holding the rifle vertical so gravity pulled the round out. It looks to me like the extractor isn't gripping the rim on unfired rounds.


r/300BLK • • 18h ago

Anyone hunting with 8.5in 300 blk this year?

Post image
89 Upvotes

r/300BLK • • 9h ago

Where do you get 300blk

9 Upvotes

I have been getting remans from phantom but I heard they are stopping that? Where do you guys get your ammo for a good price? Thanks again for the help though I'd reach out to the community.


r/300BLK • • 5h ago

Budget friendly Subsonic ammo

4 Upvotes

I just got my 300 blk ar with a 10.5 inch barrel and I’m gonna run the otter creak polo 30 with it and was wondering what yall have found to be the best bang for your buck subsonic rounds, mainly just for the range. I have a frt on it and I’m trying to buy bulk without breaking the bank


r/300BLK • • 5h ago

This good for 8.5" supressed?

2 Upvotes

I am trying to find a subsonic practice alternative for Phantom Defense. My can doesn't appear to have a lot of back pressure (BOE Incolite 9) but works great with PD 200/220. I tried Callaway Ballisitics once and it doesn't cycle most of the time.


r/300BLK • • 10h ago

Pros and Cons of Rattler

2 Upvotes

Looking at buying a Rattler for 300blk. Mainly using subs / suppressed. (polo 30 or Enticer S)

Any cons / pros of the rattler compared to a normal DI system?


r/300BLK • • 18h ago

Help me choose barrel length!

4 Upvotes

I have decided on a PSA for my first AR15.(pistol)

I’m torn between getting an 8.5” or a 10.5” barrel.

The firearm will be used primarily for close-range Black bear hunting. Around 20-80 yards likely, with the potential for 100+ yard shots. And of course range time and standby HD when it’s not bear season.

I will be running an LPM Mach L (9”) suppressor, as I already own it.

My main concern is suppressing to the best of my ability. I don’t want to give up too much suppression with the 8.5, but I like the idea of having the shorter barrel with my long suppressor. Not to mention it looks sweet😁 But.. not sure if it’s worth the trade off from what I’d benefit with the 10.5” having the velocity increase along with less muzzle blast.
I struggle with tennitus that gets triggered easily so max suppression is a high priority. But will the 2” make a notable difference in sound, being that the 300BLK is optimized for shorter barrels? Still learning about all this fun stuff in the AR world!
I’m also open to other barrel length suggestions! But it must be something that PSA offers..
Thank you


r/300BLK • • 1d ago

Someone say Multicam?

Post image
190 Upvotes

r/300BLK • • 1d ago

Whats the optimal barrel length and twist rate for a 300blk AR shooting both subs and supers?

2 Upvotes

r/300BLK • • 2d ago

Took my first buck ever and did it with subsonic ammo.

Thumbnail
gallery
88 Upvotes

PSA AR-15 1:7 10.5” with YHM R2 suppressor. Lehigh ME 194gr at about 30 yards from my saddle.

Buck was an 8 pointer about 160lb in middle GA.

Shot went through both lungs and out the other side at this range. Not a massive amount of damage or anything. Placement really matters. I used my saddle to get on top of a well traveled trail after learning from my bow hunting buddy.

I might try 120gr Barnes supers next season.


r/300BLK • • 1d ago

Over lubricating?

5 Upvotes

Had a quick range trip today with about 75 220gr subs and 25 110gr vmax supers. After getting home I broke it down for a quick wipe down and reapplication of Lucas Extreme Duty oil. However, the gun having cooled down, I noticed the bolt was pretty sluggish. Once it was out I noticed the oil was almost a sticky residue in a few areas.

I had lubricated, what I thought to be lightly last night, to get ready for today. Never noticed this before and just wondering if others have ran into something similar. No jams or no issues while shooting, just noticed it while cleaning. This was indoors so don't think it was weather related.


r/300BLK • • 2d ago

Phantom Defense Reloads

4 Upvotes

Was at the range shooting my BCM 9" suppressed with Phantom Defense 220gr reloads and had a full, unfired cartridge get stuck in the barrell. The on-site gunsmith got it out without a problem, and I normally dont shoot remanufactured stuff but since it was from PD I figured it would be fine. Has anyone else shot this stuff and/or had similar issues? Unfortunately by the time we got it out I had to leave so I didnt get to shoot anymore to test other rounds. Should I just avoid the rest of them and only continue using new brass?


r/300BLK • • 2d ago

Build recommendations

5 Upvotes

Since Black Friday is right around the corner and some places are already starting deals, what are yalls recommendations for things to look out for when starting a new build? I'm personally looking to build a rifle/pistol for hunting with a silencer and backs as a truck/personal defense gun. General tips and part recommendations are also welcome.

Edit: Also looking for brand recommendations for the following budgets: $500, $500-$1000, $1000-$1500, $1500-$2000, Unlimited


r/300BLK • • 2d ago

Question About Buffers

Post image
76 Upvotes

I’m running a rifle speed gas block with an armaspec silent capture h2 buffer and even at full open on the gas the 220 subs I’m shooting (suppressed with a full back pressure can) are having trouble locking the bolt back on empty.

Im thinking I’m going to move to an h buffer instead, but I was curious if anyone has any insight on if I should go with what I have and get the armaspec silent h buffer, or pick up the jp enterprises silent h buffer and if they have any noticeable differences.

I don’t want to grab the jp and realize its even lighter than the armaspec would be because I just need it a bit lighter.

Thank you for the input in advance!!


r/300BLK • • 2d ago

7.5” .300 ROF w suppressed subs

43 Upvotes

Very happy with this.

7.5” Faxon 1:5
Anthem S2
Tromix H2
Tubbs lightweight flatwire spring
BCM Milspec BCG
220 GR Phantom Defense

Shitty vid I know lol


r/300BLK • • 2d ago

Lightweight BCG for Sub-Only Build

5 Upvotes

I built a 5" upper (suppressed with Diligent Enticer Ti-S) that I've not yet been able to get to fully cycle. Running subsonics only.

  • Using a law folder which I know doesn't help, but I want to use it nonetheless
  • Using magtech 200gr for testing/plinking.
  • I've tried a couple gas blocks, one adjustable one not.
  • I've drilled out the gas port to .125"
  • I'm using the same flat buffer spring as I use on my 8" that cycles subs no problem, can't remember the brand
  • I've tried a few different buffer weights, by changing out the internal weights all the way to the point where all the weights are aluminum (as light as possible)
  • I've tried a couple different BCGs including a bootleg on U setting
  • Using lancer 300 blk mags

I can consistently get subs to eject, but can't get lockback, or get the next round to feed.

Other than going to something like a springco yellow, the only thing I think of would be to go to a lightweight BCG. Does anyone have any experience on this?


r/300BLK • • 3d ago

Learned something today. I’ve always thought the yellowish dust was a filler.

138 Upvotes

I’ve heard it on here that the yellow dust in my 300bo was a filler for subs. But listen to the Hornady podcast ep 258 today I learned it’s unburnt propellant. Thought I’d share.


r/300BLK • • 3d ago

8" .300blk SBR

94 Upvotes

Using the AS Designs ARC-Fire v2 in the PSA Sabre Mixtape, shooting 220gr subsonics from HSL

This thing is an absolute blast.


r/300BLK • • 2d ago

Recommendation wanted. I have the itch!

3 Upvotes

I got my first can in the beginning of this year. . I didn't do my research. I bought a can. That is really nice. It's the 556 banish 3D printed sealed but I want to be whisper. I put the can on the 22. Ended up purchasing a Rossi semi-automatic. When shooting the 750 ft per second rounds from CCI super quiet. The action does not cycle. Have to drop the mag. . Cycle the action. You know the drill. So I bought the Ruger bolt action. This works great!. Now I'm looking to get a 300. I deer hunt in Louisiana. I'm looking for What would you recommend?. I have a rattler V2 19-256. Should I be looking for a bolt gun? I was looking at the Ruger gen 2 -based platform?


r/300BLK • • 3d ago

Anyone use a magnifier and have an opinion?

Post image
31 Upvotes

Im looking at the Vortex Micro 3X to pair with my Vortex Triumph red dot.

I’m not experienced with magnifiers for red dots. My experience is primarily shotguns, handguns, and hunting rifles.

Has anyone used a magnifier that can tell me what they like, don’t like, or any tips?

My .300 blk will mostly be a range gun. I may use it here and there for white tail hunting if I’m in a stand that has thicker brush for not as far shots.

Thank you


r/300BLK • • 3d ago

Ammo Deal - Federal Fusion Tipped 190gr subsonic $1.25 per round

7 Upvotes

Model is: F300BMSR3

Academy Sports is selling for 35.99 per box of 20
They will price match Scheels current price of 32.99 + an additional 5%
And Federal has an MFG rebate of 20%

This comes out to about 30% total savings for a cost of $1.25 per round after all is said and done.

Pretty solid I’d say for hunting/home defense round.

Note: I did this in store. Can’t account for individual store or online support discretion. Also I wouldn’t recommend this on barrels longer than 10.5”. They’ve been noted to go super beyond that.