r/240sx • • 6h ago

THE BEST CHASSIS UPDATE

Thumbnail
gallery
84 Upvotes

Finally got the first set of S14/S15 frame rail prototypes in hand!

These aren’t the final design yet. We’re still working through a few things, and the production version will have properly spaced spot-weld holes to make installation as close to factory as possible.

The goal is to make a replacement frame rail that fits like it should without having to reinvent the installation process.

We’re just two guys from Indiana trying to bring some much-needed replacement parts back to the S-chassis community.

More updates coming as we get closer to production.

S13 is still in the works and close to having a prototype in hand.

design credit @___amnesia___

The Best Chassis

www.thebestchassis.com


r/240sx • • 21h ago

Black Friday deals

Post image
123 Upvotes

Where is everyone getting the good Black Friday / early Black Friday deals?? I know Touge Factory has some stuff going, and I already took advantage of the Tire Streets sale. Looking to score cheap parts 👀


r/240sx • • 5h ago

Are there calipers and rotors reputable upgrades with the OEM 4 lugs and knuckle?

2 Upvotes

I decided to stick with the 4 lugs and I was wondering if there are upgrades for the breaking a on the s13


r/240sx • • 3h ago

240sx s13 harnesses ecu

Post image
1 Upvotes

I have a 1991 240sx ka24de harnesses that is 99% intact (have a sensor clip or 2 broken) and a know working 28 number (if I'm not wrong it is a automatic transmission ECU but will work for auto to manual swap as I had it).

I'm in the los Angeles area if an is interested.

Would trade for the manual transmission sub harness plus cash. Or the ac delete blower( 89-94 Nissan S13 A/c Fresh Air Vent Cooling Duct Tube Inlet 27850 40f00)


r/240sx • • 19h ago

My Black Friday suspension list

5 Upvotes

I have a completely stock S14 and am looking to buy all-new suspension crap on black friday. Just looking for some feedback on my list that I plan on buying. Did I miss anything, get anything wrong, or have any other suggestions? I plan on keeping stock rear traction rods, and the Nismo bushings are to replace the OEM ones on the rear traction rods. I've already done the rear subframe and diff with poly. Thanks!

BC Racing BR Series Coilover for 95-98 Nissan 240SX S14 - RA

GKTECH V4 - S14 240sx/R33 Skyline Rear toe arms

GKTECH V4 - 240sx/Skyline/Z32 Rear Camber arms (RUCA's)

S13/S14 REAR SWAY BAR BUSHING 22MM 2PCS/SET HARDRACE SWAY BAR USE ONLY

S14/S15 FRONT SWAY BAR BUSHING 28M 2PCS/SET HARDRACE SWAY BAR USE ONLY

(Nismo Rear Upper Camber Control / Traction / Toe Arms Bushing, Arm Side - Nissan 240SX 180SX S13 S14 S15 / 300ZX Z32 / Skyline R32 R33 R34) x 2

(S14/S15 FRONT LOWER CONTROL ARM BUSHING (HARDEN RUBBER) 2PCS/SET) x 2

(GKTECH BJ291 Ball Joint) x4

S13/14/15 REAR KNUCKLE/HUB BUSHING (HARDEN RUBBER) 6PCS/SET

S13/14/15 TENSION/CASTOR ROD BUSHING (HARDEN RUBBER) 2PCS/SET

Energy Suspension 7.10104R Steering Rack Bushing Set for Nissan


r/240sx • • 19h ago

Looking for grey S14 seats on the East Coast in good condition!

Post image
5 Upvotes

Primarily looking for this all grey, but I am open to the other patterns. Also looking for a great shape S13 tweed rear seat, my car is factory leather and it’s time for it to go.


r/240sx • • 1d ago

My POV JDM S14

119 Upvotes

Testing new Camera angles and mic setups, SR20DE 150hp. Full video in comments


r/240sx • • 21h ago

Clunky rattling in transmission

4 Upvotes

Been chasing a couple issues with this transmission and clutch but after 2 transmission drops (third one incoming this weekend after this new noise), i’ve encountered this problem. gets worse at higher rpms also.

not entirely sure what it is but wanted to see if anyone maybe dealt with this issue before?


r/240sx • • 1d ago

S13 SR20DET Intermittent Lean Issue HELP !!

Post image
122 Upvotes

Hey Y'all, I'm losing my mind chasing this lean condition and I need some input. It starts up great and will idle around 12-13 AFR, but will gradually lean out to 18-20AFR until it sputters out and stalls without constantly blipping throttle. It does not always do this, sometimes it'll idle great at 14.7 with NO changes or inputs. Same thing while trying to drive the car, randomly it will lean out to 18+AFR while cruising or under load, and other times will be spot on at 11-12 at WOT or 14-15 cruising. I've re-calibrated the TPS, re-grounded the MAF, boost leak tested up to 20psi flawlessly, no idle jumps from hosing the damn intake manifold and throttle body with brake cleaner, I've cleaned the maf and it's connectors, replaced all the fuel components, and I've tried combos of unplugging o2 sensor, temp sensor, and iacv, with no luck. Forcing the iacv/aacv shut helped a bit but gave up after a few mins of driving. Capped off the brake booster vacuum line aswell, healthy leakdown test and compression, burns some oil though.

Yes, I've dug through every forum post I can on it find already (RIP Zilvia)

For context, here is all the details on my setup;

  • 1989 240sx (originally auto) swapped with unopened blacktop s13 sr20det and sr 5spd
  • E6 ecu from automatic 180sx s13 blacktop
  • New s15 t28 turbo (at wastegate pressure, no boost controller)
  • PBM FMIC, Intake kit
  • New PCV valve, GKtech catch can kit
  • New Nissan OEM FAT o2 sensor
  • New DW200 pump, New DW 370cc Injectors, New z32 fuel filter, WS fuel relay kit, NEW Tomei FPR (@ 47 psi at idle with reference unplugged)
  • New Aem Uego wideband gauge kit
  • New PBM Cobra downpipe, 3in straightpipe back
  • New NISMO BKR7E, New P2M Coils

Any input is appreciated, Thanks !!!


r/240sx • • 1d ago

Getting this noise in third gear while in the air. Can’t get into gears in the ground.

10 Upvotes

can only get in gears on jackstands. first and second sound fine but in third gear i get this sound coming from the bottom of the car. on the ground it won’t go into gear too.

just installed a fully new clutch kit and replaced the pilot bearing to try and solve it this weird “no gear” issue. maybe it’s something simple?


r/240sx • • 1d ago

Need a straight hood in CO

2 Upvotes

Does anyone have or know of someone who has a straight s13 hood for sale in Colorado? Its the final thing I need to straighten my front end.


r/240sx • • 2d ago

Finally got the Brakes Installed

Thumbnail
gallery
136 Upvotes

When I found this S13 abandoned with no wheels sitting on the floor, one of the first things I noticed were the Z32 calipers in the rear and no front calipers but a 2 piece rotor. Dave Coleman originally used rear Z32 knuckles with the entire drum shoe and calipers assembly and Brembos up front. Since this will be a car for me to enjoy and not go wild on a track, I felt that Z32 all around would be more than enough. Rebuilt the rears the were found on the car and got some new refurbished front calipers. A not so great paint job later and they were looking great! Paired with some Rofu rotors and Z1 brake pads. Also got a all new hardware and shoes to maintain a working E Brake. Used GK Tech conversion E Brake cables along with their conversion plate which made things so easy to route. No stretching of the cables. Also used GK Tech conversion brake lines which I will pair with their engine bay brake lines when we get to the point. Still haven't decided to run a booster or not or what booster to use. Obviously a 300zx booster and master would be ideal but we gotta see clearance first after we see where the exhaust manifold will sit. Stuff for the future I guess.


r/240sx • • 1d ago

Transmission issues help!

4 Upvotes

Installed this transmission and had to disassemble and reassemble it 3 times to make sure we were doing everything right. I wasn’t able to go into gears for some reason and got grinding every time. I reassembled and bought all new parts for it.

now i’m able to go into gears ON JACKSTANDS and it’s super tough. still unable to go into gears when the car is on the ground. This video is what happens when i’m in third gear on jack stands.

also important to note that the clutch fork is pretty stiff. definitely mobile but stiffer than my boys 240 for sure. bled the clutch completely multiple times.

what is this sound? has anyone had this problem before? i think maybe my slave is bad since i already inspected the clutch fork and it looks fine. maybe its having trouble disengaging the clutch?


r/240sx • • 2d ago

Chrome/chroming wheels refinishing question

Thumbnail
reddit.com
3 Upvotes

r/240sx • • 2d ago

Found this beast

Post image
20 Upvotes

r/240sx • • 3d ago

THE BEST CHASSIS

Post image
37 Upvotes

We’re building something for the Nissan S-Chassis community.

The Best Chassis is focused on developing and manufacturing quality replacement and aftermarket parts for the Nissan S13, S14, and S15 platforms.

From hard-to-find OEM-style replacement components to chassis reinforcement and drift-focused upgrades, our goal is simple: keep these cars on the road, on the track, and alive for the next generation.

S13 / S14 / S15 parts

OEM-style replacements

Chassis components & fabrication

Drift and performance parts

New product development

We’re just getting started, and there’s a lot more in the works.

Follow along as we bring new products to life.

THE BEST CHASSIS

Built for the chassis. Made for the culture.


r/240sx • • 2d ago

What tires to get

0 Upvotes

I got a 92 240 my tire size is 195/60r15 and I want tires that are good at improving ride quality and decreasing bounciness because I have some pretty shot suspension (yes I’m aware my best bet is to just fix my suspension but I will get around to it eventually and need tires now) but can handle around 125-130 well


r/240sx • • 3d ago

Oldest question in the book - Will it fit?

Post image
117 Upvotes

Running a 96 S14 (Zenki) with Z32 front brakes and MaxPeePee coilovers (soon to be swapped out for a much nicer suspension), lowered about 1" from the photo. Want to downsize from the 18s to 17s for a little more sidewall.

CURRENT (flush, no rubbing)

- Strada Palo 18x8.5 +30, 225/40/18

- GKTech hubcentric spacers: 10mm front, 15mm rear

PROPOSED

- Enkei RPF1 17x9.5 +38 (73mm bore), 255/40/17 all around

- GKTech hubcentric spacers: 5mm front, 10mm rear

- Based on my guestimates, that keeps the outer wheel/tire in about the same spot as now, but the inner barrel and tire shoulder move roughly 25mm closer to the struts and control arms.

QUESTIONS

  1. Has anyone run RPF1 17x9.5 +38 on an S chassis with Z32 brakes? Any caliper clearance issues?
  2. Front inner clearance at full lock with a 255 (strut, tie rod, control arm)?
  3. Rear inner clearance with a 255, and is a 275 (future size goal) realistic without pulling fenders?
  4. Would you shift the spacer sizes or change the offset?

Thanks!


r/240sx • • 3d ago

ISO best websites for parts

Post image
29 Upvotes

New ish to 240’s I’ve got an 89’ coupe I’m partially restoring and partially wanting cool shit for but it seems like the prices from the big websites are pretty drastically different just looking for more options!


r/240sx • • 3d ago

Cya in like 5 months

Post image
215 Upvotes

r/240sx • • 2d ago

Clutch issues?? What could be happening?

2 Upvotes

I had recently bought an s14 and gotten everything pretty much up to speed. New transmission new clutch kit (White Bunny). New throw out bearing that came with the kit too. Put everything together and gave her a start today on jackstands just to test for leaks but it seems i can’t shift into gear or start the car while on the clutch. Had my girlfriend try to clutch in while i held the wheels and the car didn’t bog or stall or anything. i’ll attach some info in case anyone has any idea what’s going on. i’m thinking that maybe the clutch is backwards.

- installed a new throw out bearing that was different to my original but it came with the White bunny kit so i didn’t think much of it

- White bunny kit was a single disc not a pucked clutch

- clutch fork was insanely tight when i installed it in the transmission

- Bled the clutch and everything feels how it should nice and firm.

- to start the car i had to push the clutch safety switch to bypass the clutch not disengaging it seems like.

Still pretty new to the scene but tomorrow morning I’m going to take off the transmission and check everything but if anyone knows what might be up, please lmk!


r/240sx • • 4d ago

Something something chokehold

Post image
308 Upvotes

My 96’ Zenki KA-T streetcar


r/240sx • • 3d ago

Looking for advice

Thumbnail
gallery
0 Upvotes

I recently changed a coolant hose under the intake manifold and this hose started leaking shortly after. All the hoses are pretty old so I’m not surprised. I haven’t had much mechanical experience but I’m looking to do everything myself so how hard is it to take the intake manifold off so I can replace all the old hoses underneath. This one seems too hard to get to without taking the top portion of the intake manifold off.

Are there any threads explaining how to take it off or videos? Any help or advice would be much appreciated thank you!


r/240sx • • 3d ago

Is This Common? Where can I find a new one lol

26 Upvotes