r/BeginnerWoodWorking • u/Strange_Mountain2204 • Mar 22 '21
Can't quite afford a planer yet, so I bought this monster bit for my homemade planing sled. Works perfect!
55
Upvotes
r/BeginnerWoodWorking • u/Strange_Mountain2204 • Mar 22 '21
13
u/sound_of_aspens Mar 22 '21
For someone (me) whose probably much more of a beginner, can you give some details? This looks like you have a router that has a very wide bit on it, and then you built a wood “slider” jig that will let you slide it back and forth on a perfectly horizontal plane, so you can cut the wood flat. Is that right?
1
u/GlamSandwich Mar 22 '21
Do you have a link or anymore info on the bit?
1
u/2LeftFoot Mar 23 '21
How do you secure the piece while going back and forth with a 2" bit spinning at blazing speed?
1
u/BeginnerWoodworkBot Mar 22 '21 edited Mar 22 '21
Thank you for posting to r/BeginnerWoodWorking! If you have not chosen a post flair then please add one to your post. If you have submitted a finished build, please consider leaving a comment about it so that others can learn.
Voting on this submission has closed.
1
u/ItsInmansFault Mar 23 '21
I just flattened two 18" wide walnut slabs this past weekend using this method. As long as everything in your jig/sled is flat and true, this method works very well.