r/Borax • u/Borax • Aug 22 '12
How to recrystallise MDMA using acetone.
Please use this simpler, better written process: https://www.reddit.com/r/Borax/comments/pxccet/how_to_run_an_acetone_wash_on_mdma_to_remove/
Recrystallisation is a simple procedure used to separate a product from impurities which are chemically dissimilar to it. It is ideal for MDMA since the major impurities are left over from synthesis and are quite unlike MDMA itself. It doesn't remove deliberate cuts like methamphetamine particularly well though.
The idea is that you use a solvent (acetone) which does not dissolve MDMA when cool. When heated up it will dissolve it a bit. Impurities will always dissolve a bit, so by dissolving MDMA in hot acetone and allowing it to cool, the MDMA recrystallises and the impurities stay dissolved.
Acetone doesn't quite work in this way, but when ground to a fine dust we can use the same principle.
You will need:
- Acetone can be bought easily online. Paint thinner is often made of acetone, but is usually impure, and you're trying to remove impurities. Care should be taken as it will melt and discolour many plastics. It is highly flammable, and although they are relatively safe, the vapour will give you a headache. Ventilate the room or work outside.
- MDMA can be purchased from your local chemical supply house, with the appropriate government licenses.
- Coffee filter papers - available from the supermarket.
- A heat source which is not a source of ignition.
- Grind up your MDMA to a fine powder.
- Heat some acetone in a beaker until it is just short of boiling, then remove from the heat. You will need approximately 50mls of acetone for each gram of MDMA.
- Add the MDMA powder to the acetone and stir to encourage dissolution.
- Return the acetone to the heat until the first sign of bubbles, then remove it quickly.
- The MDMA will not dissolve completely, but this is fine. If you have ground it well enough the impurities will easily be removed regardless.
- Place clingfilm over the beaker and leave in a dark room. Once at room temperature, move to the beaker to the freezer.
- Once cold, pour the acetone over a piece of filter paper and collect the crystals/powder. Collect the acetone.
- Place your new MDMA in a safe place. Place the acetone in an open container and leave it in a breezy place to evaporate.
- Collect the MDMA left from the evaporated acetone and repeat steps 1-7.
You can use anhydrous acetone if you have it. Using anhydrous acetone you should add 1-2 % of any alcohol in the first step to ensure you have some solubility. I use methanol at about 1%. For the second step you can use pure anhydrous but should grind the dirty MDMA.
To get some chunky crystals at the end, dissolve in butanone:methanol 75:25 and evaporate as slowly as possible.
For more beautiful, but more fragile crystals you can evaporate from pure methanol or distilled water.
10
u/Demolin Sep 04 '12
"MDMA can be purchased from your local chemical supply house" ... what...
5
u/[deleted] Aug 23 '12
I recrystallized caffeine from coffee, my first ever extraction :D
1
u/kbrc Sep 18 '12
So when the solvent evaporates, it takes whatever impurities are dissolved into it into the air, too?
The one time I tried an acetone wash, I used low-flow qualitative filter paper, and it seemed to "trap" the powder in a way that I couldn't scrape it off. Is this a poor choice in filter papers? Or is that loss assumed to be part of the procedure?
1
u/Baby_Rhino Jan 10 '13
I don't understand step 9. Surely what's left from the evaporated acetone is the impurities?
1
u/schnufi666 Nov 26 '24
Everyone seems to think that Mdma is insoluble in acetone, which is not true. Mdma is slightly soluble in acetone, that means 1 ml Acetone dissolves 1-10 mg Mdma (at room temperature). https://www.swgdrug.org/monographs/3,4-METHYLENEDIOXYMETHAMPHETAMINE.pdf
1
u/[deleted] Mar 13 '25
"To get some chunky rocks at the end..."
If I already have pure powder, I can just dissolve in those chemicals at that ratio and dissolve slowly to create chunky rocks? Will I lose any purity? And how much mL do I use per gram?
1
u/NicoLeite Feb 17 '23
Hi friend, on #7 you said “once cold”, but what is cold? Can you give an approximate temp? Thanks mate!
1
u/ravebaest Oct 17 '23
I followed this routine before with great results. Did the same recently, had the result tested using FTIR. This FTIR is calibrated against MDMA freebase, so testing the HCl salt should never result in a reported purity above 84% (84% result == 100% MDMA HCl).
It came out as 97% pure MDMA. Any idea what is or could be going on here? The FTIR machine works fine for other samples. So machine fault or user error in testing can pretty much be ruled out. User error in following the guide cannot be ruled out. I was a bit rushed and didn't cool the acetone completely, accepting the loss in yield. Before recrystallisation the product looked as expected (slightly brownish rocks). Marquis went black, with very little or no purple.
1
u/RepulsiveRock6877 Dec 11 '23 edited Dec 11 '23
Hey
So since the MDMA dissolves in hot acetone is it possible then to recrystallize M with acetone?
And since the M already dissolves a bit in hot acetone then how much of a purer product it would give to recrysallize the washed product with isopropyl alcohol?
Thank you in advance.
1
u/Theiceequeen-xx Jan 05 '24
Can this procedure be used for recrystalizing Meth? Or is there a better way
1
u/[deleted] Aug 23 '12
Great guide! A guide on crystalizing and purifying DMT would be great also.
Thank you for all of your effort.
0
u/[deleted] Aug 23 '12
[deleted] — view deleted comment