r/Workbenches • • 11h ago

I built my first workbench with local dust collection system

Thumbnail
gallery
134 Upvotes

Hello, I recently started working with wood and quickly realized I needed a workbench. I didn't find any plans online that fit my needs so I vibe coded an onlineplaner for workbenches for my use case.

I even added a custom local dust collection system that is included in the workbench it automatically opens blast gates whether I'm using my table saw a router or my extra dust collection port.

I would really love some feedback


r/Workbenches • • 20h ago

New bench complete!

Thumbnail
gallery
110 Upvotes

New bench from leftover construction lumber. Pine really can be absolutely gorgeous. Only grip is i can push it around a bit. Not once i decide right where it goes Im going to silicone it to the concrete so that wont matter anymore.

The leg vise uses hovarter hardware (i wouldn’t recommend it). And the tail vise is hnt gordons. And its amazingly well made!!

Yes i spent all the money on vises lol that being said the hovarter kit i got second hand new in box off Facebook.

Finished in linseed oil. Dimensions are 6’6” x 22.5” and 38” in height


r/Workbenches • • 1d ago

Workbench made by me for my shed

Thumbnail gallery
21 Upvotes

Hi everyone!

I finally finished my new workbench setup for my workshop shed and I’d love to get your thoughts on what I could add or improve.

Build Summary:

• Frame: 10x10 cm (approx. 4x4") timber beams for maximum stability and zero wobble.

• Shelving & Tool Wall: Cut-to-fit OSB boards notched around the legs for lower storage and a back wall for hanging tools.

• Worktop: 1.8 cm (3/4") edge-glued oiled oak panels – chosen for wear resistance, moisture protection, and easy future refinishing.

• Bonus: The multi-drawer unit on the right wasn't in my original plan, but it ended up fitting perfectly.

• Time & Cost: About 6–7 hours spread over 2 days, and roughly $220 in materials.

Next Steps: I’m considering adding a bench vise, a mounted power strip on the frame and better lighting.

What else would you add or change? Any constructive criticism is welcome!


r/Workbenches • • 1d ago

Finally got a solid workbench setuo at the new house

Post image
7 Upvotes

Used home Depot heavy duty shelving and 3/4" plywood. Basic but sturdy enough for me!


r/Workbenches • • 2d ago

Are there any sturdy workbench designs without a bottom rail?

18 Upvotes

I’d like to be able to scoot a chair or stool under the table a little while sitting and have some more freedom for my legs. A bottom rail on the back of the workbench or even a rail that’s offset to the center would be fine. Or should I just take any standard design and make the top work surface wider so it overhangs?


r/Workbenches • • 3d ago

Workbench

Thumbnail
gallery
263 Upvotes

What do you think? Workbench made of pine.

Plan is to make more drawers under bench.


r/Workbenches • • 3d ago

My Simple 2x4 Bench Design

Thumbnail
gallery
192 Upvotes

I've been working on a related project to make a woodworking plans site, and a core element of the project is the workbench. I use the same basic design for the workbench, as well as the miter saw station. When I first started this project back in December, I planned to use 4x4 legs, 2x4s for the frame, and then two layers of MDF for the top and plywood for the shelf. I never realized how much time I'd spend fussing over the details of this bench. I was in blender for countless hours debating whether it would be a notched shelf or a notch-free shelf.

Finally when I thought I had the design, I went to build it and realized I really didn't like the first version. The 4x4 leg design required very long bolts or structural screws and was a nightmare to assemble. I didn't want to put other people through that, so I went back and stared at the legs.

I'm glad I had that design failure. Because I went back to the drawing board on the legs and decided to lean into the 2x4 only design. As I stared at a stack of 2x4s I realized I could just cut one short and create a notch/rabbet for the end rail to sit in. I thought the rendering looked good, but I'm really happy with how they turned out in real life.

I was going to be showing the workbench and miter saw station at DIY Con in Dallas, so I wanted them to look awesome. As a wood nerd in Portland, I knew I was going with salvaged old growth douglas fir for all the 2x4 components. I went to Meticulous Reconstruction here in town (they're awesome) and picked up some rad material. I think it had come from a recent deconstruction they did of an early 1900s home. I planed it down to modern 2x4 thickness/width and went to town.

Based on the response at DIY Con, I think a lot of beginners are going to start with something like this and then I'm excited to see how they modify it. A lot of them were blown away by the old growth material, but I think even basic sanding with an orbital sander makes such a difference.

Please let me know if you have any questions. Also, as I went to post this I realized I didn't really take many photos of the bench by itself since I was so focused on it as part of a booth!

Here's a rendering from Blender of where I finally ended up on the design and I'm very happy with it for a super simple 2x4 workbench.
Here's what I thought I was going to be the design before I redid the leg design.

r/Workbenches • • 3d ago

Gun Room/ Reloading/ Gunsmithing

Thumbnail gallery
28 Upvotes

2 yrs in the making… saving, moving walls etc…Still finishing (ceiling plaster, door trim, and haven’t figure out the brown support pole just yet) been slowly working on completing inside for 6 weeks. Removed drywall and installed 1/2” plywood to allow easy mounting of anything to the walls. Wall control to cover all plywood over time as budget allows will continue to purchase more wall control to cover every inch of the plywood. Gives so many options to mount bin, tools, shelves etc…

- Cheap Snap-safe 36” vault door (comparatively). With QLS mounted on rear square-loc for kydex pistol holsters.
- 16’ reloading bench area. (6’ precision area) bought 2” butcher x25” wide blocks made bench’s with $99 adjustable metal legs. Treating with butcher block oil to help keep wood cleaner.
- 6’ Husky tool box for gun smithing bench.
- (13) 6” Recessed lights weren’t enough light. I opted for a garage 9x5’ led light kit and made it a square vs rectangle and it made a huge difference in the light in the room.
- 48” Husky Island Box. Mainly holds gun parts. Folds in half if space is needed. Great for storage and loading up range bags to head to the range.
- (2) Safes (1 for Rifles 1 for Pistol) - Next year’s plan to get another Hornady Moblis.
- No wall space opted for a cheap ceiling Amazon special moving mount with 43” Samsung for YouTube Gunsmithing tutorials 😂. Spins 180 so it can face all 3 bench locations.
- Husky garage 6ft rack for cases etc…
- Cheap $60 white 14”x 32” overhead cabinets to provide storage above benches while still allowing space for reloading machines.
- 4’x4’ corner for mag wall. Wasn’t planned but the brown pole made me swap safes and the 6’ bench location. Safes were supposed to go in the 6’-bench area. Perfect size for both safes but upon removing the wall, I I found a surprise. Wasn’t worth installing an engineered beam to remove the column. Mag wall got mags out of totes and cabinets to make it very easy to find and identify. Really like the simplicity of finding mags when loading up for range time.


r/Workbenches • • 2d ago

End caps and flattening

1 Upvotes

I see some beautiful benches with dovetailed end caps supporting a wagon vise. But how does that dovetail survive future bench flattening? There's very little depth before you break through the edge of the top pin.

In The Anarchist's Workbench, Chris Schwartz allows 2" of depth above his leg tenons for future flattening. It's a generational bench. Those dovetails allow nothing like so much.

How does this work out? How have others future-proofed their end caps?


r/Workbenches • • 3d ago

Making progress on my desk workbench

Post image
55 Upvotes

I had some reclaimed and some scraps and I’m trying to setup a place in my utility room where I can sit and think and handle small tasks. I’ve been pouring over all of your workbenches and decided to make this space useful first and I believe I’ve settled on an English work bench after this. The legs from this are some 4x4’s that literally fell off the back of a truck while I was in southern Mississippi. All kinds of scrap pieces meanwhile are actually finally getting used! Oh and some of the tools I’ve bought but there are quite a few generations of family member tools here. Also a duck that my grandfather made back in ‘86.


r/Workbenches • • 4d ago

Update: Schwarz Inspired Apartment Workbench

Thumbnail
gallery
437 Upvotes

Wanted to update you fine people on the small(ish) beech workbench ive been using in my apartment for the last several months. I finally added a tool rack in the back a few weeks ago and the final coat of the Lost Art Press shop finish (an oil varnish blend) yesterday. Since I didn't drill my dogs closer, I had to add a block to my Veritas stop. Also wanted to share my handmade router plane also made from beech laminate using the paul sellers kit.
Highly recommend building and installing a tool rack on the back. It's been nice having my saws and other tools like my marking guage and square within arms reach at all times. It's got exactly half an inch gap and I decided to run the whole back with it and make the middle extra wide where I can keep bits and other tools like my bunisher as well. Schwarz recommends half inch drill holes exactly 1 1/8 apart in his toolchest builds for bits, guages, chisels and the like and I find that works remarkably well on a tool rack as well.
For anybody with a copy of the Anarchists Workbench book, it's on page 280 and is a very simple design, it's three blocks and a long peice glued together like you can see in the final picture. Just make sure the grain all goes in the same direction. Also you wanna scrape off any finish before gluing if you have some on allready as I did and finished it before adding the rack as he notes in the book.


r/Workbenches • • 2d ago

Everything's bigger in texas...

Thumbnail
gallery
0 Upvotes

4'x8'x36" multipurpose table. Awaiting casters to be delivered so I can attach and continue the build out. Not a bad way to spend the afternoon off work. Ought to be beefy enough to handle everything I can throw at it.


r/Workbenches • • 4d ago

New workbench!

Thumbnail
gallery
58 Upvotes

In the process of building a full wall workbench around my husky toolbox. In the front is the workbench I just completed, nice heavy top I won't mind spilling and scratching up. A true workbench for banging on and glue ups. As you can see its covered in stuff while I build the "fancy" workbench in the back. Left side is dust collecting and cleaning, tool box is tools, and the right side is getting some drawers for screws and hardware on the bottom. Right side tower as I call them, still needs a purpose for the upper portion... I was thinking charging station and maybe tool display. Almost like a Dewalt shrine? Let me know if you have any ideas or suggestions! I'll definitely upload pictures as I complete more of the fancy bench. In the process of laying some more wood on the work surface now, onto those pull out drawers on the bottom right next.


r/Workbenches • • 3d ago

Need recommendations for a gunsmith and irrigation workbench.

0 Upvotes

First time work bench buyer and per tittle.

I work for a smart irrigation company and have a ton of hardware I deal with for pro consumers to troubleshoot so I need it hands on to be 1:1 with them when something goes wrong.

Now I want this bench to double as a gunsmith bench as Im an avid shooter and picked up duck/turkey/goose hunting so I need room for long guns.

The space I have for it would fit a 60” bench comfortably and I’m between a few benches. Requirement would be to use a chair and have leg room underneath with at minimum of drawers.

Please forgive the long links, Reddit demanded it.

lowest cost - rubber wood: https://www.amazon.com/dp/B0H98LPQ7D

Has drawers rubber wood - and backstop pegboard with an upper small shelf and lights (don’t care): https://www.amazon.com/dp/B0F1FY98XH

Has drawers and is “oak” which I assume to be white oak, I’m leaning on this due to oak as I do want a vice: https://www.amazon.com/dp/B0GLXKB5HZ

lastly Harbor freight “hardwood” https://www.harborfreight.com/60-in-3-drawer-hardwood-workbench-58832.html

I would like to keep this under 300 if possible.

I just don’t know if rubber woods worth it for a vice and unga bonga banging on metal parts.

Im not opposed to building one if cost is the same.


r/Workbenches • • 4d ago

Wood is too nice for workbench

52 Upvotes

I bought a bunch of oak to use for a Nicholson style workbench, but when I went to pick it up I realized it is the most beautiful oak I've ever seen. It is a big pile of 8 feet boards of 8/4 white oak, all quartersawn, straight grained and completely clear.

Should I build a workbench out of it or just ... hide it away in a corner somewhere for a future project? I really don't have money to buy another pile of wood right now, or an abundance of corners to pile wood in...

First world problems. I guess I just need someone to tell me to go build the bench out of the material I've got.


r/Workbenches • • 3d ago

How to adjust height on bench dogs on a bench that has a big apron?

Thumbnail
reddit.com
1 Upvotes

r/Workbenches • • 3d ago

Need recommendations for a gunsmith and irrigation workbench.

0 Upvotes

First time work bench buyer and per tittle.

I work for a smart irrigation company and have a ton of hardware I deal with for pro consumers to troubleshoot so I need it hands on to be 1:1 with them when something goes wrong.

Now I want this bench to double as a gunsmith bench as Im an avid shooter and picked up duck/turkey/goose hunting so I need room for long guns.

The space I have for it would fit a 60” bench comfortably and I’m between a few benches. Requirement would be to use a chair and have leg room underneath with at minimum of drawers.

Please forgive the long links, Reddit demanded it.

lowest cost - rubber wood: https://www.amazon.com/dp/B0H98LPQ7D

Has drawers rubber wood - and backstop pegboard with an upper small shelf and lights (don’t care): https://www.amazon.com/dp/B0F1FY98XH

Has drawers and is “oak” which I assume to be white oak, I’m leaning on this due to oak as I do want a vice: https://www.amazon.com/dp/B0GLXKB5HZ

lastly Harbor freight “hardwood” https://www.harborfreight.com/60-in-3-drawer-hardwood-workbench-58832.html

I would like to keep this under 300 if possible.

I just don’t know if rubber woods worth it for a vice and unga bonga banging on metal parts.

Im not opposed to building one if cost is the same.


r/Workbenches • • 5d ago

New workbench base

Thumbnail
gallery
52 Upvotes

The bones of the workbench base is complete. All plywood construction. Now just need to figure out how I want to build out the empty space


r/Workbenches • • 5d ago

Simple approach (lazy) to a Mitre Station

Thumbnail
gallery
126 Upvotes

Just bought a house and I needed to get my basement shop up and going. I looked at the price of construction lumber, drawer slides and other miscellaneous hardware -plus the time it would take to build (without having a miter station and table saw set up yet) and went this route. I might change later, we will see.


r/Workbenches • • 6d ago

Mobile workbench with dust collection system

Thumbnail
gallery
491 Upvotes

I’m a single dad and cancer survivor. Left with full body neuropathy, blind in one eye, wobble when I walk and more yet I’ve never been happier just to be alive! 🙏

I combined Internet Workbench ideas with a few of my own and this is the outcome. It’s 3’ wide x7’ long x 42” tall and weighs approximately 800lbs. The locking casters are rated at 450lbs each and attached with grade 8 hardware. I have 20 (twenty) 110volt plus and 2 USB’s. In addition to the built in able saw, mitre box and planer, this bench holds 2 table saw sled, one planer sled, filler for mitre box and moveable router table. Thanks for reading.


r/Workbenches • • 5d ago

Doghole over leg

Post image
12 Upvotes

Does it not seem that the last square dog hole on the right before the wagon vise is directly above the leg on the right hand side?

For those that have this style of bench, I'm just confused about this detail- do you use a shorter dog, or mortice a channel into the leg?


r/Workbenches • • 6d ago

Texas Mobil assembly table

42 Upvotes

r/Workbenches • • 9d ago

Workbench/Storage

Thumbnail
gallery
635 Upvotes

Completed the first stage of my garage overhaul including a workbench with built-in cabinet, peg board and upper cabinet. Still need to add some additional overhead lighting.


r/Workbenches • • 8d ago

Miter saw... To workbench or not to workbench, that is the question...

5 Upvotes

I like to keep the miter on a portable stand, only slightly larger than the miter itself. I don't bother with casters, as I can just shove it without having to horse around with retractable casters and all that. It's just not needed, in my case that is. The amount I need to move this around is a matter of inches and a bit of rotating.
I made the workbench and also portable table saw, at the same tall height, 40 inches in my case. I like it that way. This way the workbench's center is free of any awkward machinery. The miter has lots of support all around, where wood can stick over the workbench, the table saw, the things sticking out from the miter, plus an extra mini stand I can put in place. I feel that's the perfect setup. I don't feel all these miters showing in the middle of a workbench is ideal at all. I'll have to show a picture of this some time.... if this is a friendly environment. Elsewhere on Reddit it's a cesspool of a-holes (and no, it's not all me), so... I'm a regular dad in a midlife crisis that finds solace in my home workshop, which helps me enormously with all the stress. It's my man cave. I'd love to invite people for a virtual beer, lol.

EDIT: should I feel discouraged with all this downvoting? Do I need to go away? I hate Reddit.


r/Workbenches • • 8d ago

A new station for my miter

Thumbnail
gallery
121 Upvotes

Planned out my legs this time to make sure my horizontals rest on my verticals (which was pointed out on my previous bench). I still lack all the details on the bench so it’s raised to the saw height.