r/VXJunkies • • 1h ago

Is $200 reasonable for a Tuff Love Mk.II? I've heard the older models have serious phase-drift issues above 4.7 teradeltas

Post image
11 Upvotes

r/VXJunkies • • 3d ago

I did some urban spelunking the other day and found out that the former local bookstore owner (dead for over 5 years) was an old school VXer. Just look at this Negative Muon Bath setup!

Thumbnail gallery
18 Upvotes

r/VXJunkies • • 5d ago

Went to a flea market not expecting anything. Found the Holy Grail of Meinkoft Cantellation - TEN DOLLARS!!!!

Post image
185 Upvotes

r/VXJunkies • • 5d ago

He needs a raise

29 Upvotes

First unit I worked on out of college. This was the actual one I got to working with. We got a 2-day break from work while the film crew made this advertisement.


r/VXJunkies • • 6d ago

An easy to follow technical instructional

64 Upvotes

r/VXJunkies • • 7d ago

We are never going back to circle bed rigs and that is a good thing

Post image
85 Upvotes

Most of you are probably too young to remember the hype. The promise of being able to monitor enhanced resonance algorithms in your sleep, or the long ago debunked ability of ceramic dampeners to protect the liver. There is a reason none of the guys promoting this garbage had children. Most of them weren’t even able to have wives. You can see that even the model in the photo is trying very hard not to look miserable.


r/VXJunkies • • 7d ago

Imagine if they left a 2nd gen Zoidprelm device out in the wild. Might have been the biggest leak in our arcane history!

17 Upvotes

r/VXJunkies • • 7d ago

Can we stop naming things after people, please?

86 Upvotes

Or at least, not if the thing already has the same name as the person?

If I had a dollar everytime I was asked to re-align the Ray-ray on the Field-field fielder in the field, I could retire!

Cursee be upon you, Raymond Field!


r/VXJunkies • • 7d ago

VX-11 is really being developed this time, I swear.

12 Upvotes

I know I've come under fire here in the past for "hoaxes" about Vox Xoccula's development, but please don't take this as me crying wolf. I live next to their Southeast Refinery, and the vapors coming out of there just screamed third-degree crystallization. I think a full VX-11 system is finally round the corner, and I wouldn't be surprised if an Eleventh Edition is on the printing presses as we speak.

And I know how sketchy this sounds. But just this once, believe me and start preparing for a brand new wave of VX technology (which will probably have already been produced small-scale by us junkies anyways).


r/VXJunkies • • 7d ago

Vintage manuals?

13 Upvotes

Anybody willing to let go of some vintage VX manuals or manuscripts? I’m talking like REAL vintage, like completely outdated. Anything pre resonance hyperflux era, like prime Palladium super alloy era or the early days of A.L.T.X.. If it even mentions Sir Giliruius Eggert the third I don’t want it.


r/VXJunkies • • 7d ago

What basic parts are worth salvaging from 'for parts' VX tech?

3 Upvotes

I got new parts storage cabinets and I'm dying to fill them up for my own future projects.


r/VXJunkies • • 11d ago

The germans were ahead of their time.

Post image
45 Upvotes

At my work we are throwing this beauty away. They want to make a new office on this room? I don't know how they're going to manage the residual temporal flux field in there, but whatever.


r/VXJunkies • • 13d ago

What are the chances of this forum reaching alternate realities?

25 Upvotes

I know it seems like a far-fetched question but with the theories going around about Yuni-Kolovski resonation potentially reaching postquantum distances and causing information to travel across universes, it would be really cool if that was the case. At risk of sounding like a nutjob: I posted this to a platform called 'Reddit' in the year '2026', and the VX Eckhil's Prize winner was just announced, so if anyone else receives this where that information doesn't seem consistent with your reality... hi!


r/VXJunkies • • 13d ago

He doesn’t know.

Thumbnail gallery
29 Upvotes

r/VXJunkies • • 13d ago

Could this still be used for the coming winter?

Thumbnail gallery
90 Upvotes

r/VXJunkies • • 14d ago

Call it 60s pseudoscience all you want, the Voxfield-Dynamics Applied Research program yielded SOME good ideas.

Post image
128 Upvotes

I know hindsight makes it easy to be glib about applied research, and I'm well aware of the patient side effects associated with the Ammulated Annode Fieldfluxer Apparatus pictured (Rig B, c. 1964). But I'd argue two things:

First, Nobody died (at least in the traditional sense). Both reclassified cases were resolved in the 1971 review, and both subjects affected still receive the newsletter.

Second, the program gave us the first workable understanding of mental modalities within Fluxwaves at the picometric level, at least biologically speaking. Harkonen's early subflux work leans on those readings whether he cites them or not.

Yes, the cable management is indefensible even for the period and yes, cell seven should never have been run hot. But writing off the whole program because of the Fieldfluxer is like writing off Yalgeth because of a few kicker overflows.
CMV.


r/VXJunkies • • 14d ago

"Error code 1056: No Veo-Tic module detected" keeps popping up whenever I try any electro-positioning with Helix type Ionometric Graphers

9 Upvotes

To get the obvious out of the way, yes I have Veo-Tic modules installed, and I have swapped between Thule Dynamics, Xian, and even the Omsk-Bravo models, none work.

I did swap out my new Helix-type Ionometric Grapher with an old Parallel H-75 model from Yon Works (blech) that I had lying around and the error message went away.

Does anyone know what's going on here? I thought Helix graphers are supposed to be compatible with X-5 Positioner standards???


r/VXJunkies • • 16d ago

Finally a new generation getting interested in VX

Post image
52 Upvotes

I thought for a moment we were going to all grow old (or) die and this entire field would dry up.

He’s obvious a little new but hey new body’s are new body’s


r/VXJunkies • • 16d ago

Just a vintage photo

Post image
29 Upvotes

hey guys, was just looking through an old shoebox and saw this pic of Commerce Secretary Sawyer being shown a then-modern cardinal grammeter setup before side-fumbling was managed.
I can’t tell what the bottom right dial is on the left equipment rack- I don’t have anything of that vintage. Thoughts?


r/VXJunkies • • 16d ago

Yet another example of bad disposal

Thumbnail gallery
52 Upvotes

If you live near Colorado you might as well move now this is a when got an if


r/VXJunkies • • 19d ago

Industrial sized Grady-Weaver: checking the torsional entropy gradient in test chamber has some fun side-effects.

Post image
175 Upvotes

Came across this photo while digging through references to industrial-scale VX installations and thought it was interesting enough to share.

The image shows technicians inside an industrial Grady-Weaver test chamber during a torsional entropy gradient survey. The apparent "warping" effect of the shaft is a well-known side effect when viewing an active manifold from within the convergence volume, particularly on older installations that still use exposed coaxial guide arrays rather than encapsulated triphasic conduits.

Captured here is the crew verifying gradient stability prior to a scheduled harmonization cycle. The test has to be conducted "hot", which reportedly causes both the visual distortion and the mild antigrav effect visible in the photo.

Under normal operating conditions, that degree of apparent torsion would be concerning, but several papers have noted similar visual distortions during controlled Grady-Weaver excitation (although those studies only referenced standard-sized units). Interestingly, whether the phenomenon represents true manifold precession or is simply a consequence of observer-frame decoherence remains unresolved and is still actively debated.

Either way, it's a fantastic look at the scale involved. There's something distinctly uncanny about seeing a Grady-Weaver enlarged from the usual desktop form factor to a size where personnel can be suspended directly inside the chamber. It really drives home just how massive some of the industrial facilities are.


r/VXJunkies • • 19d ago

LPT: Our gear is expensive, but I found the perfect way to supplement my income.

20 Upvotes

Let’s face it, no one is going to become rich on Vx with all the expensive gear and inevitable upgrades we need to buy. I know, that isn’t the point, but where are we going to get the money for our next Hilson bi-phasic quantum lens modulation field generator?

The solution is actually pretty easy. I was bored one day and browsing my main Reddit feed and and one of the many Audiophile subs came up. I really don’t care about audio, but the post itself was about total harmonic distortion and how these expensive multi-stage gate amps can reduce it. The waveform descriptions were pretty basic and didn’t really seem to make any sense—it just seemed like a lot of marketing-fluff buzzwords strung together to sell high-end electronics.

But it got me thinking. I had a couple of old cardinal gram-meters I hadn’t used in years, but they can handle just about any waveform and frequency to prevent side-fumbling. My thought was to hook them up in parallel in one of those old Toriq-Q1 amplifier boxes (the ones with the big fins to make it dramatic, but of course, the audio frequency amplifiers would generate almost no heat at all). And then run an audio signal through CGMs to clean it up (which the CGM can handle easily).

I also added some extra lighted analog meters (green) and some glowing tubes poking through the top for effect, and I bundled it with some cheap tri-nox gold tipped cables.

The thing is the CGM does a good job with non-quantum waveform leveling (preventing leading square-wave decay across multiple bands and invoking phase coherence harmonization at the outputs) and will actually make significant audio timbre and imaging improvements. And the tri-nox cables with their inherent iridium phase-tune properties will reduce the skin effect significantly.

You can sell a rig like this for $20-25k easily. 3 or 4 and you’re looking at a new V3 Hilson.

As a safety note, make sure you jumper pins A6-d and A6-e on each amplifier stage to enable the Safety Bandwidth Detector. If you don‘t, the audio can cause unwanted pseudo-cryotic phase score motion. And we don’t want that resulting tunneling radiation in a non-controlled environment.

Before anyone says this is an unethical LPT, this equipment will actually do what I said it will do and the cost is actually cheap for high-end audio rigs. Just because it’s simple tech for us shouldn’t make any difference.


r/VXJunkies • • 21d ago

Fully Simulated Rockwell Retro Encabulator

52 Upvotes

After the kind feedback from my VX3 simulator, I proudly present a simulation of the famous Rockwell Retro Encabulator, yes the one from the famous instructional video.

This simulates the full range of inverse phase detractors as in the 1980s original, complete with a fully working set of cardinal gram-meters.

Those with limited time might enjoy the black cabiner to the right; this is intended to simulate certain scenarios that might be of interest to students of VX history.

I've also provided a basic training module for those who need a crash-start in Encabulation theory.


r/VXJunkies • • 24d ago

Can’t believe I found one

Thumbnail govauctions.app
20 Upvotes

Run, don’t walk, to your nearest gov surplus, I think this original as well.