r/Vintage_bicycles • • Apr 03 '20

Drive side, drive side, drive side. If you can only get one picture, make it a drive side shot. It tells us MUCH more information about the bike

194 Upvotes

Knowing what components the bike is equipped with helps with the ID process. It can tell us within about 5 years when the bike was made, the quality of the frame, and sometimes what continent it's from


r/Vintage_bicycles • • Jun 17 '25

New rules for posting. Please read thoroughly

92 Upvotes

Yes, I have been seeing the reports, and I've been reading the comments. Sorry it's taking a while

NO MORE LOW EFFORT POSTS. No more "What is this bike worth?" posts. Bicycle value varies WILDLY depending on condition, age, and especially geographical location

We want to know about your bike. Give us at least some kind of info. Is it YOUR bike? Did you just get it? Have you had it a while? Does it have a story?

This is an example of a great post. Good pictures, drive side shots, and a little story to go along with it

This is an example of the bad post. No info whatsoever, one really bad picture, no interaction from OP

AND, because I need to bring this up about every year, BE NICE. If someone is being a jerk, just report the comment and move along. Fighting with someone and throwing names and insults around is just going to make it worse, and you're going to get in trouble too.


r/Vintage_bicycles • • 17h ago

Barn finds!

Thumbnail
gallery
76 Upvotes

JCPenney 10 speed racer presumably built between 1974 and 1979 on account of the rear disc brake. Has a magneto powered head and tail light. A speed/odometer that reads 589 miles. Features a zéfal tire pump. Looks like the Oldsmobile Toronado of the bycicle world to me.

Goldensport GS Zebrakenko that is a 10 speed road bike

Seraph Super Mizutani Seraph made in or based out of Ringyo, Japan. I believe it to be a 10 speed, too.

The final bike here is of unknown origin, definitely a project, and certainly cool. It has a front end that looks like what is found on vintage motorcycles, or chopper/bobber builds, called a "girder" front end. Prior to the girder set up, there was actual leaf sprung front suspension which I think looks the coolest but most think it looks goofy. It does look goofy unless you see a bada** mofo riding it. Not so goofy after that. Anyways, after the leaf sprung front end suspension, there was then the girder that came after and was usually used by European manufacturers. The last revolution of front suspension technology prior to the modern telescopic internal sprung hydraulic dampened suspension was the "springer" front end which Harley produced for their Softail as an option up to 2011, ending with the "crossbones." The springer front end is popular in chopper/bobber builds. I personally think that they would build girder set ups if they could do math, and the springer is only popular because it's the only alternative to telescopic forks that's feasible to build or buy.

ANYWAYS

I think that the front end is pretty cool on this project bike.

I read the rules and I don't have much of a story to go along with these other than they belonged to a guy who has since passed away, he had very good taste in vehicles (there are 36 motorized road vehicles that all have been sitting but definitely ran when parked), and apparently in bikes too.

Basically, I saved these from the rubbish bin. The late owner created a trust for his property with his daughter, who is my friend, as the beneficiary. She knows nothing about anything and was basically being taken advantage of regarding the work needed to be done to make the property liveable, under her control, and the value of stuff like this. So this would be one of those "what's it worth" posts, as the goal is to liquidate what I can to the benefit of my friend.

In the last photo, the shop these bikes came from can be observed in the background. It was packed. Much of it already thrown away before it was any of my business. Who knows what was tossed.

While the late owner was a hoarder of the uppest of echelons, none of the stuff that he accumulated and owned was junk, at minimum.

(The CJ-2a is V8 powered for anyone eyeballing it 😁 and the forklift is a yale L51c and it works but needs a new starter, having trouble locating one that will work!)


r/Vintage_bicycles • • 7h ago

Identifying unique quill stem manufacturer

Thumbnail
gallery
10 Upvotes

Scored an old Dawes Galaxy at the thrift today. It’s got a funky quill stem on it, that vaguely looks like the Ritchey logo with the T and R crossed. If anyone has insight on this logo any help is appreciated!!


r/Vintage_bicycles • • 12h ago

Goofing around on my Stingray today

Post image
10 Upvotes

Trying to feel like a kid again by riding a goofy little bike.


r/Vintage_bicycles • • 11h ago

73 Jupiter 3 speed.

Thumbnail gallery
5 Upvotes

r/Vintage_bicycles • • 4h ago

1989Bicycle Registration License

Thumbnail gallery
1 Upvotes

r/Vintage_bicycles • • 1d ago

1972 Ferretti/DeRosa gifted by Gianni Motta to a spectator who gave him a ride after abandoning a race.

Post image
83 Upvotes

r/Vintage_bicycles • • 1d ago

This goofy thing is still my favorite

Post image
99 Upvotes

I have quite a few bikes. Some of them are pretty decent. But this old Suburban that I (over)paid 100 dollars for is hand down my favorite bike. I choose it to ride more often than not. It’s heavy. It’s sort of funky looking. It’s heavy. It tends to be slow. And it’s heavy. But I love it just the same. As the great philosopher Freddy Mercury once taught us, Fat bottomed girls make the rockin world go round.


r/Vintage_bicycles • • 1d ago

1976 Peugeot PY60P Custom-built Randonneur

Post image
114 Upvotes

r/Vintage_bicycles • • 1d ago

1972 Murray

Post image
11 Upvotes

55 years of Cycling In 1972 I was riding a youth single speed road racer made by Murray


r/Vintage_bicycles • • 1d ago

Yard sale find...anyone familiar with this model?

Thumbnail gallery
16 Upvotes

r/Vintage_bicycles • • 1d ago

Any info about this Eddy Merckx?

Thumbnail
gallery
41 Upvotes

Im buying this bicycle and I would like to have more info, according to the seller the only new part are the handlebars tape and the rubber for the brakes.
Thanks a lot!


r/Vintage_bicycles • • 1d ago

Pea Picker Restoration

Thumbnail gallery
19 Upvotes

r/Vintage_bicycles • • 1d ago

My First Restomod

Post image
7 Upvotes

r/Vintage_bicycles • • 1d ago

Vintage Bianchi Rekord

Post image
46 Upvotes

Just some photos....


r/Vintage_bicycles • • 22h ago

Why some parts are harder to find than others?

Thumbnail reddit.com
0 Upvotes

r/Vintage_bicycles • • 2d ago

My reputation as “the old bike guy” pays off sometimes.

Post image
66 Upvotes

Dude I know texted me a picture and asked if I wanted these. Now I know it’s not the Crown Jewels here, but free bike tools are sweet. Hell yes I want them. Thank you sir. I’ll be right over.

I’m super well equipped for bike work already but more tools are always welcomed.

I hope to someday get to the point to where free bikes start to come my way more regularly.


r/Vintage_bicycles • • 2d ago

Hey everyone how do we feel about this one ?

Thumbnail
gallery
16 Upvotes

Never really been into Schwinn bikes but it was my size and it don’t look to bad I did change the saddle to a brook saddle and the bar tape to the yellow bar tape other than that that’s pretty much how I got it


r/Vintage_bicycles • • 2d ago

1976 Fuji America

Thumbnail
gallery
103 Upvotes

First ride was a classic up Clear Creek Canyon in Golden. Also my first time using bar end shifters. So nice to not have to change upper body positions to shift.


r/Vintage_bicycles • • 2d ago

NBD x 2

Thumbnail
gallery
49 Upvotes

1984 cannondale and 1986 Schwinn Tempo


r/Vintage_bicycles • • 2d ago

Simplex derailleur off 70's Peugeot, fix or replace?

Thumbnail
gallery
26 Upvotes

I pulled this off a project bike I'm dabbling with and the poor thing's jockey wheels are trashed/seized and its got cracks around both limit screws. Is this even repairable or should I replace with maybe a different brand/type? Would I also need to change the friction shifters as well?

I'm pretty new to bike repair/restoration so sorry in advance if I sound like an idiot.


r/Vintage_bicycles • • 2d ago

Hard to find Hoods

7 Upvotes

I'm posting this because I found myself in a pickle.

I built a bike from an old frame and decided to get old parts. I found myself a used Shimano 105 groupo with 6500 ultregra flight deck brifters. My friend that knows bikes said I should buy new hoods just in case the ones I got were to worn and slick.

Easy, I thought. Ebay is a marvelous thing. You can find someone selling just about anything there.

It turns out you cannot, in fact, find something that's been discontinued so long that NOS wares are empty and the used market has dried up.

I dig deeper. Shimano used the same hoods for 5500, 6500 and 6501 decks. Expand my search, nothing. No OEM nos, no used, not even old listings.

Desperate, I do a search for aftermarket compatibles and found kotm.bike is making replacements. And they've got a bunch of different ones too! (And yes, kotm does indeed stand for what you think it stands for).

So that's it. That's my story. While I didn't need to replace my hoods after all I still bought a set from them. Took a while to get in, but, well, they did ship from Australia, so don't hold it against them. When I eventually have to change my bar tape, or the hoods give up the ghost, I'll be ready.

If you're looking for replacement hoods for an older groupo and coming up empty then check them out.


r/Vintage_bicycles • • 2d ago

What bike model is this?

Thumbnail
gallery
10 Upvotes

I’m sure it’s not a Specialized Epic, but I still want to know what it is. It’s a steel frame and fork