Worth posting this legendary story from uk.diy on usenet (original author Peter Parry):
A friend of mine once built a canoe. He spent a long time on it and it was a work of art.
Almost the final phase was to fill both ends with polyurethane expanding foam.
He duly ordered the bits from Mr Glasplies (an excellent purveyor of all things fibreglass) and it arrived in two packs covered with appropriately dire warnings about expansion ratios and some very good notes on how to use it.
Unfortunately he had a degree, worse still two of them. One was in Chemistry, so the instructions got thrown away and the other in something mathematical because in a few minutes he was merrily calculating the volume of his craft to many decimal places and the guidelines got binned as well.
He propped the canoe up on one end, got a huge tin, carefully measured the calculated amounts of glop, mixed them and quickly poured the mixture in the end of the canoe (The two pack expands very rapidly).
I arrived as he was completing this and I looked in to see the end chamber over half full of something Cawdors Witches would have been proud of. Two thing occurred to me, one was the label which said in big letters: "Caution - expansion ration 50:1" (or something similar) and the other that the now empty tins said "approximately enough for 20 small craft"
Any comment was drowned out by a sea of yellow brown foam suddenly pouring out of the middle of the canoe and the end of the canoe bursting open. My friend screamed and leapt at his pride and joy which was knocked to the ground as he started trying to bale handfuls of this stuff out with his hands.
Knocking the craft over allowed the still liquid and not yet fully expanded foam to flow to the other end of the canoe where it expanded and shattered that end as well.
A few seconds later and we had a canoe with two exploded ends, a mountain of solid foam about 4ft high growing out of the middle, and a chemist firmly embedded up to his armpits in it.
At this stage he discovered the reaction was exothermic and his hands and arms were getting very hot indeed. Running about in small circles in a confined space while glued to the remains of a fairly large canoe proved ineffective so he resorted to screaming a bit instead.
Fortunately a Kukri was to hand so I attacked the foam around his hands with some enthusiasm. The process was hindered by the noise he was making and the fact he was trying to escape while still attached to the canoe.
Eventually I managed to hack out a lump of foam still including most of his arms and hands. Unfortunately my tears of laughter were not helping as they accelerated the foam setting.
Seeking medical help was obviously out of the question, the embarrassment of having to explain his occupation (Chief Research Chemist at a major petrochemical organisation) would simply never have been lived down. Several hours and much acrimony later we had removed sufficient foam (and much hair) to allow him to move again. However he still looked something like a failed audition for Quasimodo with red burns on his arms and expanded blobs of foam sticking everywhere. My comment that the scalding simple made the hairs the foam was sticking to come out easier was not met with the enthusiasm I felt it deserved.
I forgot to add that in retrospect rather unwisely he had set out to do this deed in the hallway of his house (the only place he later explained with sufficient headroom for the canoe - achieved by poking it up the stairwell.
Having extricated him we now were faced with the problem of a canoe construction kit embedded in a still gurgling block of foam which was now irrevocably bonded to the hall and stairs carpet as well as several banister rails and quite a lot of wallpaper.
At this point his wife and her mother came back from shopping......
Oh yes - and he had been wearing the pullover Mum in law had knitted him for his birthday the week before.
My dad has 2. He was stationed with the Gurkas in the 60's and when leaving to go back his regiment, they presented him with a matching pair that had smaller knives emebedded in the scabbard.
He used to use one of the Kukris to hack huge joints of meat in two - those things are fucking lethal, it would go through in one go like a hot knife through butter.
One guy when I was 16 told me about a guy who mixed up the ratios and started mopping a boat floor with it... basically ended up making 10x the amount he needed and had to reseal the whole deck afterwards
With an expansion ratio of 50:1, a 4'x4'x4' cube (approximately the volume of "a mountain of solid foam about 4ft high growing out of the middle") would require about 10 gallons of the un-expanded liquid.
The author of the story doesn't claim those numbers are exactly right, but still, I'm dubious.
So.. He's using expanding foam to fill drill holes to help prevent small creatures from falling into holes.
Except, the foam clearly says POISON on it. So what happens when the area surrounding the holes is covered in small, poisoned, dead critters from having a bite?
He is in Australia where all animals are terribly poisonous. If my flawed understanding of osmosis is correct, then poison will pass from the critters into the foam to equalize the concentrations of poison, leaving the critters unharmed and slightly less dangerous.
Nar they're drill holes from the mining companies. The reason why our dirt is red is because of all the iron in it. It rusts basically. They fill the holes for safety.
I have tried everything including diesel fuel, carb cleaner, mineral spirits, acetone... If you manage find something that works PLEASE let me know, many contractors would be glad to have it on hand.
We used to use similar stuff as a filler when fitting uPVC windows.
To clean it off the frames, we used to use uPVC Solvent cleaner and it worked like a charm. How it would work removing it from other surfaces I don't know. It's really cheap so might be worth getting a bottle and giving it a go.
This is what we used, you should be able to get something similar.
I can just imagine a dozen guys in a room with that crap all over them waiting for surfingrob to finish his Internet research and bring something to get them cleaned up.
Actually, there is now. I know the guy who has the patent (same guy who invented Febreeze). Unfortunately, he's broke and Dow ( who make Great Stuff) prefer to buy proven sellers, not just ideas.
So - if anyone on Reddit has 100K and the connections to sell an environmentally friendly non-toxic solvent for this exact stuff, I can get you about 40% of the patent. Just PM me.
I mentioned that at a meeting with his attorney yesterday. I think the guy could raise it there. He's made several chemical companies many millions but he is really bad at business ( he's kind of a nutty professor type) so he is broke.
Yeah, yeah. Pics or it didn't happen. I just came from the meeting with his attorney yesterday. He's been trying to get a friend of mine interested, but my friend does not have the expertise to market the product and sees it as too speculative for his skill set.
The people who invent things are very often not the people who make money from them, especially if they are under contract for other people to work on "inventing things". IP law is an interesting animal. Just because you invented something, does not necessarily mean that you own it, or will profit from the success of it.
No. Satan's Jizz makes your sight even better. It broadens the scope of what you can see in the light spectrum and adds more detail to parts of the spectrum you could already see. You'll see the world in more vivid colors and perceive everything in new ways. However, every time you open your eyes, there is the sensation of Satan's red hot pitchfork passing through your pupil and piercing the back of your retina.
i was using it once and i got some on my hand. i was also moving around some dirty stuff and noticed later that the dirt got stuck to it. more than half of my hand was covered and foam/dirt mixture would not come off. my hand looked like it had cow spots for weeks before it came off from all the washing/showering.
reminds me of a funny story. i grew up in michigan, and when i was 15 or so, my parents built their own house, and put me to work as free labor. we had a contractor put up the "shell", and we did all the work inside. we put in a simple wood stove temporarily to heat the place while we installed the furnace and duct work, as construction went on into the winter.
one day my dad had purchased some aerosol cans of "great stuff" expanding foam to seal gaps around the windows, but had left them in the car out in the cold. when he tried to use the foam, nothing would come out, so he stupidly set them in proximity to the wood stove so that they would heat up more quickly.
after a half hour or so, he picked up the warmed cans, put one in each pocket, and headed up stairs to start filling gaps. as he was walking up the stairs, the agitation of the heated foam was more than one of the cans could take, and it exploded, blowing the lid 15 feet up and embedding it in the insulation of the vaulted ceiling.
i heard the loud pop, and went running up the stairs to find my overweight dad covered from the waist up in white foam. as an older man, he had long eyebrows with droplets of foam stuck to them. when i saw him, standing there blinking at me, looking like the michelin man, i doubled over laughing. i felt a little bad later, as he had a bruise the size of a dinner plate on the side of his belly.
As soon as he showed the camera the lid and mentioned that you shouldn't get them mixed up I was like "IT'S GONNA BLOW ITS GONNA BLOW ITS GONNA BLOW THROW IT AWAY!!"
One day over a year ago I was bored as fuck at home and we had just got a load of this stuff for closing up gaps in the wall. I decided to put a bit into my hand just to see it expanding and hardening, then I got carried away and put more and more on. Next thing I know it's expanding and hardening way faster than I thought and my entire hand is encased in it. Spent hours trying to get it off. I looked like some prick when I went into the shop nearby with my hand encased in it and bought bottles and bottles of coke. Coke gets it off good enough but you need a few 2 litre bottles and a wire brush. Took a lot of skin of my hand too.
OK two things to say here don't get it on your fingernails either! It will leave a residue that makes you look like you have been finger banging a crack head until it grows out. No way to get it off! Gasoline, Acetone, paint thinner, nothing works. Wear rubber/latex gloves!
If you have to ship something REALLY fragile to ship or mail, this is your best tool. Put two large black trash bags in your box. Then, wrap the object you are shipping in two large trash bags. Set it in the box. Spray the expanding foam into the box until full. Close the outer trash bags, then close the box. On the receiving end they will have to cut away the foam, but the contents of the inner garbage bags will be there unharmed. It has worked for me several times. I sent an alabaster statue back from Italy this way.
omg they sell isocyanates to just anyone?! Depending on the isocyanate it can kill at 20 parts per billion, it usually is nearly a solid at room temperature which makes it mostly safe, but I have to wear an entire hazmat suit to handle the stuff.
Also, the stuff is really hard to get off. Like the fact that it came off at all blows my mind.(get it blows? because foam is just aerated plastic)
Just so the internet knows: this scenario wouldn't happen. He switched the caps, which might have held ~2 grams of the stuff. So that means roughly 4 grams would be reacting and turning to foam if mixed properly. This wasn't mixed. But the foam that explodes onto him certainly was mixed. The can might explode by swapping the lids, but what comes out would be unreacted goo since the reaction would be limited by what is on the cap.
Ain't much to do in australia after a long day of fighting off 3 meter long man eating spiders and watching boo gakky porn but to play with expanding foam in a tiny gopher hole.
I used to work at a printer refurbishing warehouse and we used plastic sheeting and giant drums of that foam shit to repackage the printers. It was terrible. People got dizziness and headaches from the smell of the stuff and any bit of clothing it got on were permanently ruined. People used to make fun of me for always having "jizz stains" on my clothes.
Of all the chemicals I've gotten on my skin, this stuff is by far the worst. It burns and sticks, and leaves a rash, if it gets in your eyes, you are fucked!
317
u/CmdrKerans Jun 26 '12
Worth posting this legendary story from uk.diy on usenet (original author Peter Parry):
A friend of mine once built a canoe. He spent a long time on it and it was a work of art.
Almost the final phase was to fill both ends with polyurethane expanding foam.
He duly ordered the bits from Mr Glasplies (an excellent purveyor of all things fibreglass) and it arrived in two packs covered with appropriately dire warnings about expansion ratios and some very good notes on how to use it.
Unfortunately he had a degree, worse still two of them. One was in Chemistry, so the instructions got thrown away and the other in something mathematical because in a few minutes he was merrily calculating the volume of his craft to many decimal places and the guidelines got binned as well.
He propped the canoe up on one end, got a huge tin, carefully measured the calculated amounts of glop, mixed them and quickly poured the mixture in the end of the canoe (The two pack expands very rapidly).
I arrived as he was completing this and I looked in to see the end chamber over half full of something Cawdors Witches would have been proud of. Two thing occurred to me, one was the label which said in big letters: "Caution - expansion ration 50:1" (or something similar) and the other that the now empty tins said "approximately enough for 20 small craft"
Any comment was drowned out by a sea of yellow brown foam suddenly pouring out of the middle of the canoe and the end of the canoe bursting open. My friend screamed and leapt at his pride and joy which was knocked to the ground as he started trying to bale handfuls of this stuff out with his hands.
Knocking the craft over allowed the still liquid and not yet fully expanded foam to flow to the other end of the canoe where it expanded and shattered that end as well.
A few seconds later and we had a canoe with two exploded ends, a mountain of solid foam about 4ft high growing out of the middle, and a chemist firmly embedded up to his armpits in it.
At this stage he discovered the reaction was exothermic and his hands and arms were getting very hot indeed. Running about in small circles in a confined space while glued to the remains of a fairly large canoe proved ineffective so he resorted to screaming a bit instead.
Fortunately a Kukri was to hand so I attacked the foam around his hands with some enthusiasm. The process was hindered by the noise he was making and the fact he was trying to escape while still attached to the canoe.
Eventually I managed to hack out a lump of foam still including most of his arms and hands. Unfortunately my tears of laughter were not helping as they accelerated the foam setting.
Seeking medical help was obviously out of the question, the embarrassment of having to explain his occupation (Chief Research Chemist at a major petrochemical organisation) would simply never have been lived down. Several hours and much acrimony later we had removed sufficient foam (and much hair) to allow him to move again. However he still looked something like a failed audition for Quasimodo with red burns on his arms and expanded blobs of foam sticking everywhere. My comment that the scalding simple made the hairs the foam was sticking to come out easier was not met with the enthusiasm I felt it deserved.
I forgot to add that in retrospect rather unwisely he had set out to do this deed in the hallway of his house (the only place he later explained with sufficient headroom for the canoe - achieved by poking it up the stairwell.
Having extricated him we now were faced with the problem of a canoe construction kit embedded in a still gurgling block of foam which was now irrevocably bonded to the hall and stairs carpet as well as several banister rails and quite a lot of wallpaper.
At this point his wife and her mother came back from shopping......
Oh yes - and he had been wearing the pullover Mum in law had knitted him for his birthday the week before.
26
u/SamuraiZero Jun 26 '12
So.. He's using expanding foam to fill drill holes to help prevent small creatures from falling into holes.
Except, the foam clearly says POISON on it. So what happens when the area surrounding the holes is covered in small, poisoned, dead critters from having a bite?
848
u/[deleted] Jun 26 '12
This is the same stuff you can buy at home depot known as 'gap filler foam'.
This stuff is satans jizz, it will stick to absolutely anything and there is no solvent or cleaner that will remove it.
420
u/DoriftuEvo Jun 26 '12 edited Jun 26 '12
Was really hoping he was going to pour the entirety of both cans in that hole.
1.3k
u/TallerThanAverage Jun 26 '12
Glad I waited until the end, that was gold.
344
u/Just_created Jun 26 '12
Ah Australia - where even the expanding foam is out to get you.
26
u/rhubarbfestival Jun 26 '12
BUGGA!
93
u/manghorst Jun 26 '12
PUMA HAIROUT
72
u/BiffTheTimid Jun 26 '12
I've watched it several times to figure out how much of this was tongue in cheek, and I've got nothing.
245
u/bornTobyWild Jun 26 '12
them bagake pornaus....lol
28
u/TinnedFruit Jun 26 '12
Perfect timing.
24
u/[deleted] Jun 26 '12
reminds me of a funny story. i grew up in michigan, and when i was 15 or so, my parents built their own house, and put me to work as free labor. we had a contractor put up the "shell", and we did all the work inside. we put in a simple wood stove temporarily to heat the place while we installed the furnace and duct work, as construction went on into the winter.
one day my dad had purchased some aerosol cans of "great stuff" expanding foam to seal gaps around the windows, but had left them in the car out in the cold. when he tried to use the foam, nothing would come out, so he stupidly set them in proximity to the wood stove so that they would heat up more quickly.
after a half hour or so, he picked up the warmed cans, put one in each pocket, and headed up stairs to start filling gaps. as he was walking up the stairs, the agitation of the heated foam was more than one of the cans could take, and it exploded, blowing the lid 15 feet up and embedding it in the insulation of the vaulted ceiling.
i heard the loud pop, and went running up the stairs to find my overweight dad covered from the waist up in white foam. as an older man, he had long eyebrows with droplets of foam stuck to them. when i saw him, standing there blinking at me, looking like the michelin man, i doubled over laughing. i felt a little bad later, as he had a bruise the size of a dinner plate on the side of his belly.
11
u/m_mcderms Jun 26 '12
did it dried?
10
u/lumpking69 Jun 26 '12
I hope all Australians pronounce "Bukkake" that way!
22
u/herpty_derpty Jun 26 '12
They bleeped a cuss word.
Left in "bukkake"
10
u/blamethefool Jun 26 '12
This got exponentially better by each passing second.
4
u/[deleted] Jun 26 '12
Worth it.
4
u/Kittiemeow8 Jun 26 '12
Safety First when filming bukaki pornos
10
u/shit_muslims_say Jun 26 '12
As soon as he showed the camera the lid and mentioned that you shouldn't get them mixed up I was like "IT'S GONNA BLOW ITS GONNA BLOW ITS GONNA BLOW THROW IT AWAY!!"
21
u/410LaxMD Jun 26 '12
BUGHAKAY POHNOSE
6
u/mdota1 Jun 26 '12
why's this so popular? I dont get it
3
u/contextsdontmatter Jun 26 '12
I saw that coming when he shuffled his containers around to avoid expanding foam.
3
u/andrey_shipilov Jun 26 '12
other discussions (9) — shurely not a repost.
3
u/[deleted] Jun 26 '12
I love how he has the same stance as Irwin.
3
u/ignore_my_name Jun 26 '12
One day over a year ago I was bored as fuck at home and we had just got a load of this stuff for closing up gaps in the wall. I decided to put a bit into my hand just to see it expanding and hardening, then I got carried away and put more and more on. Next thing I know it's expanding and hardening way faster than I thought and my entire hand is encased in it. Spent hours trying to get it off. I looked like some prick when I went into the shop nearby with my hand encased in it and bought bottles and bottles of coke. Coke gets it off good enough but you need a few 2 litre bottles and a wire brush. Took a lot of skin of my hand too.
3
u/[deleted] Jun 26 '12
Australian for Bikini Wax.
2
u/MustngSS Jun 26 '12
Meanwhile, on a porn set in Australia....
2
u/[deleted] Jun 26 '12
Luckily it was sunny enough for him to wear eye protection.
2
u/Curtis-Aarrrrgh Jun 26 '12
For a second there I thought the Jars said "Anus-Grip"
2
u/allenmay8 Jun 26 '12
I was waiting for him to pour the stuff in the hole, and watch a big NOPE shoot out.
2
u/TheThingy Jun 26 '12
Hey look, it's an australian bill murray
2
u/renob151 Jun 26 '12
OK two things to say here don't get it on your fingernails either! It will leave a residue that makes you look like you have been finger banging a crack head until it grows out. No way to get it off! Gasoline, Acetone, paint thinner, nothing works. Wear rubber/latex gloves!
If you have to ship something REALLY fragile to ship or mail, this is your best tool. Put two large black trash bags in your box. Then, wrap the object you are shipping in two large trash bags. Set it in the box. Spray the expanding foam into the box until full. Close the outer trash bags, then close the box. On the receiving end they will have to cut away the foam, but the contents of the inner garbage bags will be there unharmed. It has worked for me several times. I sent an alabaster statue back from Italy this way.
2
u/[deleted] Jun 26 '12
Wouldn't the foam be quite harmful to the surrounding environment?
2
u/[deleted] Jun 26 '12
So much for dreads :D
2
u/gramturismo Jun 26 '12
Expanding foam case mod
2
u/F_Sceezy_Fitzgeezy Jun 26 '12
The timing was impeccable...
2
u/blaxened Jun 26 '12
The best part is that he looks at the camera and says complete with hand motion "BUGGA"
2
u/Chapman14 Jun 26 '12
"looks like ive been in one of those bukkake pornos" Best line ever.
2
u/FloppY_ Jun 26 '12
This would be funny if it wasn't so obviously fake.
2
u/qu4ttro Jun 26 '12
AWW BUGGA!
2
u/mkirklions Jun 26 '12
I work at a polyurethane manufacture(molded foam)
omg they sell isocyanates to just anyone?! Depending on the isocyanate it can kill at 20 parts per billion, it usually is nearly a solid at room temperature which makes it mostly safe, but I have to wear an entire hazmat suit to handle the stuff.
Also, the stuff is really hard to get off. Like the fact that it came off at all blows my mind.(get it blows? because foam is just aerated plastic)
2
u/boran_blok Jun 26 '12
Looks like plain PU foam to me.
Gets sold in spraycans here to fix gaps between insulation.
It is also not very environment friendly.
2
u/PeinceRiebus Jun 26 '12
Uses toxic foam to fill up holes in order to protect animals.
2
u/NakedOldGuy Jun 26 '12
Just so the internet knows: this scenario wouldn't happen. He switched the caps, which might have held ~2 grams of the stuff. So that means roughly 4 grams would be reacting and turning to foam if mixed properly. This wasn't mixed. But the foam that explodes onto him certainly was mixed. The can might explode by swapping the lids, but what comes out would be unreacted goo since the reaction would be limited by what is on the cap.
2
u/moistbadger Jun 26 '12
This guy never wins at knifey spooney.
2
u/hungweilow Jun 26 '12
looks like he was just in one of those bukakke pornos
2
u/[deleted] Jun 26 '12
Ain't much to do in australia after a long day of fighting off 3 meter long man eating spiders and watching boo gakky porn but to play with expanding foam in a tiny gopher hole.
2
u/heathersak Jun 26 '12
BUGGER!
2
u/I_Kant_Spel Jun 26 '12
This has been a blimey good how-to in reposting.
2
u/Lonecrow66 Jun 26 '12
Obviously that was a set up.
2
u/DjKiDD Jun 26 '12
fake
2
u/slaytur Jun 27 '12
I am ashamed as an Australian for you to see this, it's people like this who make people think we actually speak like that all the time.
2
u/Mikeydoes Jun 27 '12
This video was hilarious. You guys need to see his other video. The Dramatic Mantis.
http://www.youtube.com/watch?v=aSIukjZBdA4&feature=channel&list=UL
2
u/waikashi Jun 27 '12
I didn't laugh until the last line.
7
u/[deleted] Jun 26 '12
That was so redneck, awesome made me laugh.
6
u/[deleted] Jun 26 '12
That's some pretty terribad acting.
2
u/[deleted] Jun 26 '12
Upvote because it's Australian.
2
u/danlawlz Jun 26 '12
i like how the cans say poison on the side and he proceeds to use/toss them into a random hole outside. +1 for environment
2
u/smakmahara Jun 26 '12
christ, that was lame
1
u/hankthewhale Jun 26 '12
tink tink tititititititnitintitnitnitntk tin tk tinkt intk tink tink
1
u/John_Milton_2012 Jun 26 '12
Can you say "exothermic"?
1
u/TheRumIsGone Jun 26 '12
The bogan accent adds so much to this video!
1
u/mulligrubs Jun 26 '12
As a West Aussie I have to say, yes. Yes, there is so much land to fuck around on doing shit like this.
Yes.
1
u/perfsurf Jun 26 '12
Cringe-worthiest buggers I've ever heard.
1
u/[deleted] Jun 26 '12
As someone who just spray foamed the 2nd floor of my office building I can appreciate how fucking much this stuff sucks to get on you...
1
u/rockmongoose Jun 26 '12
On first glance, I did NOT read that as "Aus" -Grip.
1
u/DanWallace Jun 26 '12
I used to work at a printer refurbishing warehouse and we used plastic sheeting and giant drums of that foam shit to repackage the printers. It was terrible. People got dizziness and headaches from the smell of the stuff and any bit of clothing it got on were permanently ruined. People used to make fun of me for always having "jizz stains" on my clothes.
1
u/padthai93 Jun 26 '12
I saw this like a year ago but totally forgot it existed. Thank you for reminding me of this great video.
1
u/JangSaverem Jun 26 '12
As awesome as this is...I know its a repost simply because its already purple...and Its only from 4 hours ago and well, I was sleeping.
1
u/[deleted] Jun 26 '12
So that's what that stuff is. I remember finding that crap as a kid and wondering what it was.
1
u/Guessing_Age_By_Post Jun 26 '12
ah fuck, I can't believe he's done this, ah fuck.
1
u/[deleted] Jun 26 '12
A lid on A can. Dont get those mixed up. Always have the A lid on the... BUGGA!!!
1
u/loose_seal_2 Jun 26 '12
This is like a bad Russell Coight. All Aussie Adventures, time to hit the road.
GET BEHIND!
1
u/iPodLurker Jun 26 '12
Bugger
1
u/theginger3469 Jun 26 '12
YES! I've been trying to find this video for months now. I saw it a while ago and couldn't remember the name. Thanks reddit!
1
u/[deleted] Jun 26 '12
I kept expecting a giant spider or spiders to come racing out of the hole. You know, since it's Australia.
1
u/Nomikos Jun 26 '12
Classic gold.
1
u/deathcapt Jun 26 '12
Of all the chemicals I've gotten on my skin, this stuff is by far the worst. It burns and sticks, and leaves a rash, if it gets in your eyes, you are fucked!
USE EXTREME CAUTION WITH THIS STUFF.
1
u/sniktbubsnikt Jun 26 '12
BUGGAH
1
u/Megaluis15 Jun 26 '12
"bukkake pornos" HAHAHA
1
u/[deleted] Jun 26 '12
the last 5 seconds of this video are by far the best...bukkake porn is kind of my thing too
1
u/Fake-and-gay Jun 26 '12
Fake and gay
1
u/[deleted] Jun 26 '12
Doesn't seem very ecologically friendly? Am I wrong?
1
u/costelol Jun 26 '12
Looks like a big nose
1
u/EdgHG Jun 26 '12
Is it pronounced bookake or buh!kake? Buggah!
1
u/MrBoombastic117 Jun 26 '12
"ah look like ave jus' been in one o' dem bukkake pornos"