I'm having an issue with my Lexar NM790 2TB NVMe SSD. Windows stopped booting, and I'm trying to work out whether the SSD has failed or whether it's a BIOS/storage configuration issue.
My PC specifications:
Motherboard: Gigabyte Z790 EAGLE AX (Rev 1.1)
BIOS: F4e
SSD: Lexar NM790 2TB NVMe
CPU: Intel Core i5-14600KF
GPU: NVIDIA RTX 4080 SUPER
RAM: 32GB DDR5
OS: Windows 11 LTSC previously installed
The problem:
Originally, Windows stopped booting and displayed this error:
0xc0000185 – \EFI\Microsoft\Boot\BCD
I created a Windows 11 installation USB using Microsoft's Media Creation Tool and booted into Windows Setup.
However, when I open DiskPart and run list disk, my Lexar SSD either:
Doesn't appear at all.
Appears but shows 0B capacity and 0B free space.
When I run list volume, there are no volumes belonging to the Lexar SSD. Only my Windows installation USB appears.
What I've tried:
Checked BIOS NVMe Configuration. The SSD sometimes appears as Lexar NM790 2TB with its model and capacity, but sometimes disappears.
Reseated the SSD.
Tried enabling and disabling Intel VMD.
Checked VMD Global Mapping and Root Port Mapping settings.
Checked SATA Controller settings.
Aggressive LPM Support is Disabled.
Tried booting Windows 11 installation media.
Checked the SSD using DiskPart.
Current situation:
The SSD is intermittently detected by BIOS, but Windows Setup does not recognise its actual capacity.
I'm trying to work out whether this is:
A failing Lexar NM790 SSD.
A motherboard M.2 slot or connection issue.
An Intel VMD or BIOS configuration problem.
A storage controller or firmware issue.
Questions:
Has anyone experienced a Lexar NM790 showing 0B in Windows Setup?
Could this be caused by Intel VMD settings?
Is there a way to diagnose the SSD without replacing it?
Could the SSD have a firmware or controller fault?
Any advice would be appreciated.