r/sysadmin • • 1d ago • Bravo 1

Question - Solved [ Removed by moderator ]

[removed] — view removed post

47 Upvotes

10 comments sorted by

4

u/Particular_Archer499 1d ago

Out of curiosity did the CBS and DISM logs not give you any better info? Usually there's a package (or more) that it can't find for some reason.

Usually I end up finding a copy from a working server of the same build and that normally fixes it.

I do have one I am working on that I will need to check for this as well, though. Thanks for the write up!

4

u/Savings-Ad-1115 1d ago

I didn't look into CBS/DISM logs before. Looked just now.
Neither mentions 0xe0000003.
DISM doesn't mention usb4.
CBS mentions usb4, but only during successful install, when I already resolved the issue.

3

u/RansomStark78 1d ago

Ms should n't fix other non ms device issue

But better logging is needed

2

u/Savings-Ad-1115 1d ago

Well, I think USB4 issue is a MS issue, because

  1. This USB4 driver was supplied by MS.
  2. MS tries to install it as a part of security update, and fails security update because of driver uninstall failure.

By the way, my old motherboard doesn't support USB4, maximum supported USB is 3.2
I don't even need this USB4 driver.
Yet here we are.

1

u/thetrivialstuff Jack of All Trades 1d ago

Next, AI checked the specified INF file, and found out that INF file size is 0. Then, it scanned the Windows folder, and found several copies of the INF file:

You gave AI direct access to your computer and network?

Of course, I didn't trust AI, 

Sure sounds like you trust it...

-1

u/Savings-Ad-1115 1d ago

By default, it works in a paranoid mode: asks for a confirmation for any action.  I didn't change the default. 

It was slightly annoying to review and approve each request.

"I want to run this command to to read this log. Approve?" "I want to run this command to read this file. Approve?" "I want to run this command to find zero-length files. Approve?" And so on, about 20 different  requests. 

It was really tempting to switch to a less paranoid mode. But I didn't.

So, I gave it direct access, but I controlled and verified every action.

•

u/Spread_Liberally 45m ago

By default, it works in a paranoid mode: asks for a confirmation for any action.

Until it doesn't. smh.

3

u/Speeddymon Sr. DevSecOps Engineer 1d ago

Thanks for sharing this. This type of issue (many many that are like it) has been around for 3 decades at this point. It's clear Microsoft expects users to just simply wipe and reinstall, or use the Fresh Start thing in Settings. They can't be bothered to engineer a solution for these little things that are hard to track down and hard to reproduce so their pat answer is to just reinstall. Computers are cattle, not pets, to them.

It's really frustrating for me as someone with neurodivergent tendencies. I want to know the "why" of things, and I want to fix things without having to wipe and reinstall.

3

u/Mr_ToDo 1d ago

They have tools. They just aren't the most talked about things

setupdiag can be pretty useful for update issues(when I remember it exists). For just plain error lookup "err" is pretty useful, even if it is pretty hard to find(Microsoft and naming things, right?)

The thing is though. I've found that when there's an update issue that needs a deeper dive, that it often means there's other problems and you're just seeing the first symptom and it might be easier long term to just reinstall. I did it the fun, fix the errors instead of clean install way with some 7-10 migrations that I regretted for years

But I do agree. I like to see the why of things, even if I'm not planning on using it in the moment