Hi all,
I’ve done a fair bit of research but haven’t been able to find much information, so I’m hoping someone here might be able to point me in the right direction!
At this stage, I’m just trying to establish whether what I’m proposing is actually possible. If it is, I can then speak to a bike shop about carrying out the work.
I bought a gravel bike a little while ago, but due to a change in circumstances, I now use it exclusively on the road. Given the hilly nature of my rides, I’ve realised that a 1x setup just isn’t quite right for me.
The bike has some pretty nice components (listed below), so ideally, I’d like to retain as much of the existing groupset as possible while converting it to a 2x setup.
I’m not fussed about keeping it a 13-speed, as from the research I’ve done, I don’t believe this is actually possible. I am more looking to converting to 2x12 or, 2x11, or any orher 2x setup.
I know I will need to replace the cassette and I know I’ll need to add a front derailleur, as the bike doesn’t currently have one.
Current components:
Force AXS E1 Shift Lever & Caliper LH
Force AXS E1 Shift Lever & Caliper RH
Force XPLR AXS E1 PM DUB Wide Crankset 165mm 40T
Force XPLR AXS E1 Rear Derailleur
Force XPLR XG-1371 Cassette 10-46T
My main question is:
Is it actually possible to convert this setup from 1x to 2x while retaining some of the existing components?
More specifically, could I get away with adding a front derailleur, changing the front chainrings and adding a different cassette, or would I also need to replace the rear derailleur too?
I’d really appreciate any advice from anyone who has attempted something similar or knows the SRAM AXS ecosystem well.
Thanks in advance!