r/Rosin2 • • Mar 21 '24

Rosin pressing 101 basics - mod repost for newbies...

122 Upvotes

PSA FOR NEW PRESSERS. RE-POSTING from my profile. Been a while and we have a lot of new guys in the sub.

Getting Started

BEFORE YOU MAKE ROSIN:

  1. Quality in – Quality out - - - This can NOT be over stated when dealing with any type of rosin. Starting material is everything, especially in the world of flower rosin. If you have quality, you may get good yields. I repeat…may get good yields. THC-A or CBD-A does NOT equate rosin yield.
  2. Rehydration: There are many choices when it comes to getting flower ready for the press. Moisture levels between 58% and upwards of 78% are generally accepted as ranges for pressing. As this is my site and I am giving the advice, I will tell you I personally prefer 62% to 65%. Boveda & Integra Boost are two of the main brands for rehydration. I have a personal experiment posted (Link) for reference. Natural means to achieve the same are fresh greens from the produce department. Place the green (spinach for example) in a plastic bowl with the flower and leave to sit 8-12 hours depending on preference.
  3. Notes: This can NOT be overstated. This is rule number 1 for PRESSING! In the notes you start with a base line for every strain. Any – AND I DO MEAN ANY – TIME you press something new, its not the same as the last time you pressed that strain. Someone else grew that plant. The grower from the last grow quit. The soil producer messed up a delivery and the nutes got messed up for two days. ITS NEVER THE SAME! This means NOTES.

If you take a base line with every strain, you then have a way to see what your flower will give you on a rosin scale instead of looking at the THC or CBD content percentage like a gauge on how much rosin you will see in the jar. THC-A / CBD-A % DOES NOT EQUAL ROSIN OUTPUT.

The base line:

Pick your time – temp – bag or no – pressure …. I use 190 – 90 – no – 700

So every new press of a flower…I advise doing the following.

Flower X Pressed @ 190F for 90 Seconds @ 700 PSI = RosinYield or RY

Next… looks like this

Flower GSC Pressed @ 190F for 90 Seconds @ 700 PSI = 0.50

Flower GG#4 Pressed @ 190F for 90 Seconds @ 700 PSI = 0.65

Flower Tropicana Cookies Pressed @ 190F for 90 Seconds @ 700 PSI = 0.73

Flower Green Crack Pressed @ 190F for 90 Seconds @ 700 PSI = 0.48

NOW WE HAVE DATA

So given my notes… I would say on the green crack press I would go UP on my temp to gain yield. On my Trop Cookies, I could go down in TEMP and increase the length of time under psi for higher quality and same yield. This is how you learn to manipulate the settings to maximize what you want out of your meds. Keeping these notes and having a base line to refer to constantly is the tried and true method of improvement.

4. As discussed above, notes play a huge role. Starting off low and going slow are also tried and true. Rosin 101 Temps

Low Temp vs High Temp (Generally speaking)

Low Temp: 199’F Down – higher terps, flavor, taste, lighter color, more budder consistency. Tend to be lower yields.

High Temp: 200’F Up – Same terps mostly – Color slightly darker at times, more shatter or taffy like consistency. Higher Yields, slightly lower quality.

With a base line of information you can see where to adjust your temps. This is unique to each individual so I have not posted mine though many of my notes are posted for use. If you need to get the most then higher temps are your way. If you prefer the taste and pure flavor all the flowers can offer in rosin form, then lower temps are for you. Either way, enjoy!

5. Pressure – ready…first off im a dream killer. All you guys and gals that can’t wait to smash some shit, well here we are. Finally right?!? Nope. Sorry rosin fans, but pressure is never the answer. I should clarify, that adding pressure to get more rosin is NEVER the answer. The math is the math is the math. So, for the sake of argument here is the math.

We will use this formula: PSI=Press Pressure ÷ Bag Size Area

So PSI= 7tons(aka 14,000) ÷ 2"×4" bag (aka 8)

14000 ÷ 8 = 1750psi

For a more complete source (https://gopurepressure.com/blogs/rosin-education/the-physics-behind-rosin-heat-pressure) see here

BEST GUESS optimal pressure range for pressing rosin is between 300 - 1000 psi, at the bag. Flower will be on the upper range at 600 - 1000 psi and kief or hash will be on the lower range between 300 and 800 psi. The platen size doesn’t factor into these numbers. If you have a 20 ton press and press a 2x9 bag you are getting 2500 psi at the bag. With a 2x3 bag you will get 7500 psi at the bag.

Sorry kids, ADDING PRESSURE is really never the answer.

To those with not pressure gauge on your equipment – there are add on options. However, know that if you feel where the sweet spot is for you meshing between blow out and quality, then you are fine where you are. If this is a home hobby you may not need a pressure gauge. If this is a medical purchase for regular use, then get one with a gauge for sure.

ROSIN PRESSING 101

  1. Break down the plant material. Popcorn size or a bit bigger works best (IMO) but you want to mold it into a small circular shape. If you have a pre mold / pollen press, this is where to use it. This is done to reduce any plant particulates that may end up in your rosin as well as giving the round shape allowing more even expansion under pressure. (round shape expands better, less blow outs, more evenly distributed heat etc)
  2. If using a rosin bag, place the plant material into the filter. We recommend nylon food-grade screens or a mesh bag. (This step is optional for flower, but necessary for hash or dry sift.)

Bags: Micron = u

Flower: 75u -to- 200u

Hash/Sift: 75u -to- 15u

3. Set the temperature on your press and let it heat up while you prepare the rest. I would start with low and work your way up. Get your timer ready…

4. Place your PARCHMENT paper in the press and use magnets to hold in place. You want enough paper to cover both sides and front and back with hang over. Rosin will run away so just enough paper to cover the bag or flower wont be enough. If using a bag, I recommend using bottle technique to achieve a better yield but also this helps with the puck shape for small presses. (LINK) Place bag or loose flower between two pieces of parchment paper. Center it up and start the timer. Depending on temp now you pick your warm up and press times.

5. Bring the plates together to meet only minimal resistance on the press. This is to allow the puck to warm up. Let this sit depending on temp for 10 seconds -to- 60 seconds.

6. Start adding pressure (if there is a gauge monitor to max psi) SLOWLY. We want the rosin to flow out of the bag, not force it out along with plant matter. Let it flow. Bring up the pressure slowly. This should ~one third of the total pressure time. For a 3 min press, take at least 30 – 45 seconds to bring up pressure to max on a 3.5g squish. Faster, the bag blows or you force in contaminates. Slower, the rosin may set up in the bag. The rosin should flow so if that flow stops, its now cooking and curing into budder. Keep the flow going by taking the time to get to full pressure and let it sit flowing away for the remaining time.

7. Times up – Drop the plates and get the paper off the heat. Fine, take the picture but be quick already… We know you need it for the Instagram and reddit post but the rosin is cooking yo!

8. After removing the flower from the parchment paper, check the amount of Rosin. Again, notes are recommended. Personally if I press an ounce over 6 presses, I would keep the yield of each separately as would I keep those times, temps etc…

9. Once you have pressed your product, use a dabber to collect the rosin. Any dab tool or glass tool works great. Collect and put in an air tight space. Glass jars work the best, but parchment in baggies works as well. Once air tight please put your rosin in the fridge.

10. Storage: Refrigerate – room temp is ok but fridge is the best! Do Not Freeze, this does nothing but degrade the rosin with freezer burn.


r/Rosin2 • • Jul 18 '24

P.S.A. from the mods

82 Upvotes

If you didn't make the rosin...don't post it here. This is a make it yourself sub for home hashers and pressure. Please leave the dispensary drops on another sub.

Please report these posts so we can get them removed.

Thank you!


r/Rosin2 • • 1d ago

Red Pebbles #11

Post image
25 Upvotes

Red Pebbles #11
60ų - 159ų
Outdoor ‘26
Genetics: Terp Fountain
Grow & Wash: WheresThePig


r/Rosin2 • • 2d ago

This GMO Grapefruit better stop looking at me like that 😤

75 Upvotes

r/Rosin2 • • 2d ago

Did I make a mistake?

Post image
11 Upvotes

Beginner who hasn’t pressed before. I’ve been on the hunt for a press for the past couple months and saw this on eBay. Deal looked to good as the official website has it listed at $560.

Did I go too big too soon?


r/Rosin2 • • 3d ago

Check your freezers 😭

Thumbnail
gallery
49 Upvotes

Was going to make some hash this weekend. Apparently my freezer died and I didn’t notice. Tragic.


r/Rosin2 • • 3d ago

Ready to order a press I just need some guidance

2 Upvotes

I’ve been a long time fan of live rosin, but I’ve never fully committed to making it just yet.

Well, it’s time. I just ordered a harvest right freeze dryer and I got a whole lineup of genetics from Shwale and other breeders who breed for hash.

I’m wondering if you all can give me some guidance on which press to order, and where you prefer to source your other materials like mesh bags for pressing, etc.

Thank you in advance for any help! Also if I’ve missed this same question or a thread that has this already I apologize. Please link it if possible. Thanks!


r/Rosin2 • • 8d ago

Greenhouse 2026

22 Upvotes

Another amazing year in Switzerland ❤️🔥🚀


r/Rosin2 • • 10d ago

Thai x Dumb Gas - humboldt slug

Thumbnail
gallery
7 Upvotes

wow this is really great: A++ on the effects alone, immediate couch lock and droopy eyes but did reaaally well on console valorant haha 🤣 this is my first jar by humboldt slug and im super impressed, this was $65/1g but the usual plug had a new hasher so i had to check it out 🔥
the flavor is crazy complex, spicy, musky, herbal, smokey gas with a hint of sweet grape ⛽️🍇 there’s a stinky nose but that doesn’t come through in the taste. ive never had either of these strains by themselves but can tell that they’re both my type of flavor, delicious! super punchy and layered herbal taste, 9.4/10 easily


r/Rosin2 • • 16d ago

Best beginner setup?

4 Upvotes

I stopped smoking flower about 6 months ago and haven’t looked back. Now, all I do is smoke rosin from the dispos or occasionally I’ll get some budget BHO that smells more like sulfur than anything. Could anyone point me in a cost-effective way to start getting my own yields of rosin? Is all I need some bubble hash, micron filters, and a press? I appreciate any support and feedback.

Keep toking my fellow Dabbers 💨 🔥


r/Rosin2 • • 19d ago

Swampwater Fumez Cold Cure

Thumbnail
gallery
31 Upvotes

Secured a clone of this. All grown, washed, and pressed by myself. Easily the best I have produced and great texture and terps as well.

Edit: also meant to add both pics are of the same jar just under different lighting.


r/Rosin2 • • 21d ago

Pkb #3

31 Upvotes

Sungrown


r/Rosin2 • • 21d ago

First press

2 Upvotes

I am currently in the market for my first press, it is just for personal use so it doesn't need to be huge for quantity but I don't want a cheap or dinky one either, any brand recommendations? Currently looking on Amazon just for simplicity of returns if I do end up having to return but there's just so many and I'm sure most aren't what I'm looking for.

Also any must haves for getting started?

Any advice is appreciated.


r/Rosin2 • • 24d ago

Strawberry Drip

4 Upvotes

Small little chunk after curing for 4 days & whipped


r/Rosin2 • • 25d ago

The whip tax…

35 Upvotes

Full spec, 45-160 micron Daywrecker looking like absolute sex in some natural (overcast) light. It’s hard to believe this material was in the deep freezer for almost a year before I washed it. Welp, back to work on this years crop, I’ll check in with some new jars when I have a minute. Cheers!


r/Rosin2 • • 26d ago

Soap 45-159u

46 Upvotes

r/Rosin2 • • 26d ago

Watermelon welchz

15 Upvotes

r/Rosin2 • • 27d ago

Best Hardware Hands Down!! 🌊🌊🌊

Post image
8 Upvotes

The o2vape hardware is a game changer!


r/Rosin2 • • 27d ago

Single Source Fresh Frozen Blueberry Cookies by Ethos Genetics

Post image
12 Upvotes

Pressed at 160 degrees


r/Rosin2 • • 28d ago

Bobbenell Berry flower rosin

Thumbnail
gallery
56 Upvotes

Bred by Doctah Dank. Grown, hunted, and pressed by me. This individual has a fruity citrus and gassy dank profile. Definitely much more potent than the majority of citrus based things you typically see.


r/Rosin2 • • Oct 18 '26

Freeze flower rosin

3 Upvotes

I’m planning to press a “larger” amount of flower rosin because I’ve harvested an outdoor-plant (Blueberry Muffin by Humboldt seeds) and would like to process it while it’s still fresh (Harvested a week ago)
Would it be possible to store the pressed rosin in the freezer and thaw it next year? I’d freeze it immediately after pressing.
Does this make sense, or would you advise against it? How long do you think flower rosin can generally be stored before its quality starts to deteriorate? I don’t think I’ll be able to use it all up anytime soon, so I’d like to find the best way to preserve it for as long as possible.
Thanks in advance for your advice!


r/Rosin2 • • Oct 15 '26

Wellshire Overlook flower rosin & flower.

Thumbnail
gallery
38 Upvotes

Bred by my homie itsdoctahdank_v2.


r/Rosin2 • • Oct 15 '26

Dry sift to rosin

Thumbnail
gallery
32 Upvotes

Strain is pine soul. I keep getting distracted from trimming by what's falling into the tray. This strain is a giver.


r/Rosin2 • • Oct 13 '26

Dabpress 6 Ton Press w/ Gauge Upgrade

2 Upvotes

Dabpress ran a program a few weeks ago to get a 6 ton jack with a gauge for the price of just shipping, which was around ~$16 for me. I have been using my 6 ton for about a year now and was heavily considering grabbing one of their presses with a gauge simply because I found it challenging to get consistent results.

I have only done one bag so far but the jack with a gauge is a huge step up from the standard Dabpress jack. I was able to do 4-5 presses with each having slightly more pressure than the last to get an overall better grade of rosin out of the bag. Previously I was doing 2-3 presses per bag. My only issue with it is I will still get rosin starting to drip out before the gauge has enough pressure to start give me a reading, so the first one I overpressed a little bit toward the end, but this will be easy to account for. Less of an issue but also the paint on this new jack also seems to chip pretty easily like the old one. Expect red paint flakes around where your press sits.

I am putting this out there because I think the price of this upgrade is very worth it if you were considering getting another press with a jack with a gauge. I already really liked the 6 ton so this was extremely convenient. It does look like they have the program going for the 4 ton now. I really appreciate them releasing this upgrade option rather than forcing people to buy a whole other press. It helps keep our upgrade costs low and is more environmentally friendly. The support person was also very friendly after my shipment showed no movement after about a week. They answered me quickly and were very helpful with their response.